BRACKET 1705673 - Caterpillar

Cat ET
Illustration 1 g03846497
Components of the Communication Adapter 3 Gp (466-6258) are listed:
(1) Current version of Cat ET software for use with a Windows-based personal computer
(2) 317-7485 Control Gp-Electronic (Com Adapter 3)
(3) 457-6114 Cable As. (CA3 - Ethernet FLASH Cable)
(4) 370-4617 Cable As. (CA3 PC USB Cable)When using Cat® ET to diagnose machines covered in this manual, cable assembly 457-6114 is required. The cable allows connections between a 9-pin port connector or a 14-pin port connector and the Communication Adapter 3 module.The new 14-Pin harness includes an ethernet port connector which allows for flashing software using ethernet.
Illustration 2 g03845540
Supports both 9-Pin and 14-Pin SAE J1939 Comm Adapter connections
(3) CA3 Ethernet FLASH Cable (457-6114)Cat® ET is a software program used to access, view, monitor, and sometimes change data used by an ECM. The service technician can use CatET to perform maintenance on the machine. Some of the options that are available with Cat Electronic Technician are listed below:
View the active and logged diagnostic codes. See Troubleshooting, "Using Cat Electronic Technician to Determine Diagnostic Codes".
Viewing the active event codes and logged event codes.
View the status of parameters.
Clear active diagnostic codes and clear logged diagnostic codes.
Perform calibrations of machine systems.
Program (Flash) the ECM with the "WINflash" program. See Troubleshooting, "ECM Software - Install".
Print reports.The following list contains some of the diagnostic functions and programming functions performed by the CatET service tool.
The failures of the ECM system are displayed.
The status of most of the inputs and the outputs are displayed.
The settings for the ECM are displayed.
Display the status of the input and output parameters in real time.
Display the clock hour of the internal diagnostic clock.
The number of occurrences.
The clock hour of the first occurrence and the last occurrence are displayed for each logged diagnostic code.
The definition for each logged diagnostic code and each event are displayed.
Load (Flash) new software.
Active and logged diagnostic codes.
Active and logged event codes.See Troubleshooting, "Diagnostic Code List" for the list of diagnostic codes activated by the ECM.Status Groups For Electronic Technician
The Status groups list the machine parameters. The status of the parameters is shown in real time.
Illustration 3 g02734437
Typical CatET Status Screen.
Accessing Service Mode For Diagnostic Codes With The Operator Monitor Display
Diagnostic codes can be accessed through the operator monitor display, as well. Refer to Troubleshooting, "Determining Diagnostic Trouble Codes" in this manual for instructions.