BRACKET AS 2811248 - Caterpillar

The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
31Oct2017
PROBLEM
The existing truck bodies may have excessive clearance on the pivot pin bores on certain AD30 and AD45B Underground Articulated Trucks. If the existing truck body wears it can cause extra movement between tray body and rear frame.
AFFECTED PRODUCT
Model Identification Number
AD30 GXR00750-00794, 796-802, 805
AD45B GXM00150-00159, 164-168
PARTS NEEDED
Qty
Part Number Description
2 1662372 PIN AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the Service Magazine M0075524 for Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-4000 hrs,
13-18 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 20.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.