BRACKET 2I5598 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure.
Connect the steering frame lock.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g00622263
Use the hydraulics to put grapple (1) in a secure position on the ground. Use blocks in order to secure the position of grapple (1).
Illustration 2 g00622264
Disconnect two hydraulic hose assemblies (3).
Remove six bolts (2) and the nuts which hold grapple (1) to the rotator.
Use the hydraulics to separate grapple (1) from the rotator. Installation Procedure
Install grapple (1) in the reverse order of the removal.