BRACKET 5090293 - Caterpillar

Illustration 14 g01543455
Lower the temperature of bearings (21) and (22). Use Tooling (E) in order to install bearings (21) and (22) .
Illustration 15 g01543445
Illustration 16 g01543293
Illustration 17 g01543452
Install pin (11) that held the head end of the bucket cylinder. Use Tooling (D) in order to install retaining ring (12) that holds pin (11) into position. Attach Tooling (B) and a suitable lifting device to extendable stick (14). The weight of extendable stick (14) is approximately 170 kg (375 lb). Use Tooling (B) and the suitable lifting device in order to install extendable stick (14). Pad (20) was left on the stick during the removal of the extendable stick. Tighten bolts (13) .
Illustration 18 g01543313
Install bolts (19) to the top of the extendable stick.
Illustration 19 g01543296
Install pad assembly (15) (not shown) and block assembly (16). Install bolts (17) and (18) .
Illustration 20 g01251313
Illustration 21 g01251312
Extend extendable stick cylinder (8). Position suitable cribbing (9) and install pin (10). Remove suitable cribbing (9) .
Illustration 22 g01251311
Install cover (6) and bolts (7) .
Illustration 23 g01250150
Place bracket (4) and hose assemblies (3) into position. Install bolts (5).
Illustration 24 g01250148
Install bolts (1) that retain bracket (2) .
Adjust the extendable stick pads. Refer to Operation and Maintenance Manual, "Extendable Stick Pads - Inspect/Adjust"End By:
Install the bucket cylinder. Refer to Disassembly and Assembly, "Bucket Cylinder - Remove and Install".
Install the bucket linkage. Refer to Disassembly and Assembly, "Bucket Linkage - Remove and Install".