1122334 CAP Caterpillar parts
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 320B FM LL, 322 FM L, 322B L, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 365B, 365B II, 375, 375 L, 3...
Rating:
Alternative (cross code) number:
CA1122334
112-2334
1122334
CA1122334
112-2334
1122334
Weight: 0.01 pounds 0 kg.
Information:
ID
28
mm
LENGTH
13.9
mm
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$45.21
05 Apr 2020
5.0[2.25] Pounds
-: -
Toro Lever-throttle Part # 112-2334
Toro Lever-throttle Part # 112-2334
Toro Lever-throttle Part # 112-2334
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 1122334:
Information:
Illustration 1 g01302254
Schematic for the shift leverThe CID 0668 FMI 02 diagnostic code is recorded when the power train electronic control module (ECM) detects a problem with the shift lever:
One of the signal wires is shorted to the + battery.
One of the signal wires is shorted to ground.
One of the signal wires has an open circuit.
There is an internal failure in the shifter.
The ECM has failed. This is unlikely.Problems with the transmission direction and speed control lever will cause the machine to respond incorrectly to the actions of the lever. Some problems with the transmission direction and speed control lever will cause the transmission to remain in the present speed and direction when a problem is detected. Other problems with the transmission direction and speed control lever will cause the transmission to shift to neutral.Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear the diagnostic codes when the original diagnostic code has been corrected.Test Step 1. CHECK FOR PROPER GROUND AT THE SWITCH
The machine harness remains connected to the shifter.
Turn the key start switch and the disconnect switch to the OFF position.
At the back of the harness connector for the switch, insert a 7X-1710 Multimeter Probe along the ground wire (contact 1).
Measure the resistance from contact 1 to frame ground.Expected Result:The resistance is less than 5 ohms.Results:
OK - The resistance is less than 5 ohms. The ground circuit is correct. Proceed to Test Step 2.
NOT OK - The resistance is greater than 5 ohms. The ground circuit in the machine harness has failed.Repair: Replace the machine harness or repair the machine harness.STOPTest Step 2. CHECK FOR POWER AT THE SHIFT LEVER.
Do not disconnect the harness connector from the shifter.
Turn the key start switch and the disconnect switch to the ON position.
At the back of the harness connector for the shifter, insert a 7X-1710 Multimeter Probe along the voltage supply wire (contact 3).
Measure the voltage from contact 3 to frame ground.Expected Result:The voltage is system voltage.Results:
OK - The voltage is system voltage. Proceed to Test Step 3.
NOT OK - The voltage is not system voltage. The + battery circuit in the machine harness has failed.Repair: Replace the machine harness or repair the machine harness.STOPTest Step 3. CHECK THE HARNESS.
Thoroughly inspect the connectors for the transmission direction and speed control lever and the connectors for the power train ECM.
Visually inspect the harness wiring from the transmission direction and speed control lever to the power train ECM. Expected Result:The wiring harness appears to be undamaged.Results:
YES - The wiring harness appears to be undamaged. Proceed to Test Step 5.
NO - The wiring harness is damaged.Repair: Repair the wiring harness or replace the wiring harness.STOPTest Step 4. CHECK THE WIRES FOR A SHORT.
Disconnect the shifter from the machine harness. Disconnect the machine harness connectors from the ECM.
At the machine harness connector J1, locate the contacts for the shifter: J1-30, J1-14, J1-19, J1-23, J1-25, J1-26 and J1-13. One at a time, Place one probe from the multimeter
Cat SIS web machinery list:
Parts cap Caterpillar catalog:
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 318C, 320B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 350 L, 365B, 365B II, 365B L, 365C L, 3...
307, 311, 312, 315, 317, 320 L, 322 FM L, 325, 330, 330 L, 350, 375, 375 L, 5080
6C8998
CAP
307, 307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
307, 307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
307, 307B, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 322B LN, 325 L, 325B L, 330 L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B, CB-434D, C...
307, 307B, 311, 311B, 312, 312B L, 313B, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 320B L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330 FM L, 330B L, 345B, 345B II, 345B II MH, 345B...
1276344
CAP-END
307B, 312, 312B L, 914G, IT14G, IT14G2
307B, 312, 312B L, 914G, IT14G, IT14G2
5W8635
CAP-FILLER
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M312, M315, M318, M320
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M312, M315, M318, M320
8U8111
CAP AS-RAIN
M318
M318
1224165
CAP
M318
M318
6C9199
CAP
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
6C9104
CAP-WIPER
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325 L, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 365B, 365B II, 375, 375 L, 385B, 5080, 5090B
307, 312, 315, 317, 322 FM L, 325 L, 330, 350, 375 L, 5080