Illustration 1 g03126496 Table 1 Specification for 349-6571 Electric Starting Motor Gp Item Qty Part Specification Description 1 3 6V-8188 Nut Torque to 30.5 3.5 N m (270.0 30.0 lb in). 2 1 338-3453 Starting Motor Solenoid Current consumption at 20V and 25 °C (77 °F): 1. For Pull-in windings is 49.3 3.3 amp. 2. For Hold-in windings is 6.8 amp max. 3 - - Torque to 2.25 0.25 N m (20.00 2.00 lb in). 4 1 4B-2049 Nut Torque to 2.6 0.8 N m (23.0 7.1 lb in). 5 1 4B-2049 Nut The switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. Torque to 2.6 0.8 N m (23.0 7.1 lb in). 6 1 6V-8188 Nut A maximum of three cable terminals or wire terminals may be used with the battery terminal nut (5). A maximum of two of the terminals may be equal to or greater than 0 AWG. Torque to 30.5 3.5 N m (270.0 30.0 lb in). 7 - - Torque to 30.5 3.5 N m (270.0 30.0 lb in). B - - The clearance between the pinion and the housing is 9.1 mm (0.36 inch). - - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction. No load performance at 25 °C (77 °F) 1. Speed is 6612.0 1887.5 rpm 2. Current draw is 100 30 Amp 3. Voltage is 23 VDC
