1613694 CATCH Caterpillar parts
307C, 307D, 308C, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312E, 312E L, 313D, 314C, 315C, 315D L, 316E L, 318C, 318E L, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, ...
Rating:
Alternative (cross code) number:
CA1613694
161-3694
1613694
CA1613694
161-3694
1613694
Weight: 0.13 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
This part in 10 request:
Show.
This information for suppliers only!
2024-05-10
2023-09-05
2023-07-29
2023-04-30
2022-08-27
2022-08-23
2022-01-21
2021-10-27
2021-09-13
2021-09-13
Compatible equipment models: 1613694:
EXCAVATOR
311C
311D LRR
311F LRR
312C L
312D
312D L
312E
312E L
313D
314C
315C
315D L
316E L
318C
318E L
319D L
319D LN
320C
320C FM
320C L
320D
320D FM
320D GC
320D L
320D LN
320D LRR
320D RR
320D2
320D2 GC
320D2 L
320E
320E L
320E LN
320E LRR
320E RR
321C
322C
323D L
323D LN
323D SA
323D2 L
323E L
324D
324D L
324E
324E L
324E LN
325C
325D
325D L
325D MH
328D LCR
329D
329D L
329D LN
329E
329E L
329E LN
330C L
330C MH
330D
330D L
330D MH
336D
336D L
336D LN
336D2
336E
336E H
336E L
336E LH
336E LN
336F L
340D L
345C
345C L
345C MH
345D
345D L
345D L VG
349D
349D L
349E
349E L
349E L VG
349F L
374F L
390F L
Number on catalog scheme:
4
For full view, you need register
Information:
7. Remove O-ring seal (4) from the housing. Remove bearing (5) from the shaft.8. Remove bolts (3) and the washers that hold retainer (6) to the housing. Remove retainer (6) and the three-section washer that is behind the retainer. 9. Put tooling (F) and a floor jack in position under outer housing (7). Install tooling (L) on the housing. Fasten a hoist to tooling (L).10. Remove the outer housing from the inner housing. Weight is 43 kg (95 lb.).11. Remove the oscillation bearings from the housings. Remove three-section washer (8). Remove O-ring seal (9). 12. Put tooling (F) and a floor jack in position under inner housing (11). A rag can be put between tooling (F) and the housing to prevent damage to the housing.13. Remove nuts (10) and the washers that hold inner housing (11) to the bevel gear case.14. Install two 1/2" - 13 NC forcing screws (12) in the housing. Remove the housing far enough to install tool (G). Fasten a hoist to tool (G). Put an axle in position in the housing to help keep the housing in balance.
A wire must be installed on the two forcing screws and around the ring gear and planet carrier to keep them from falling. Do not remove inner housing (11) further, until the wire is installed.
15. Remove the inner housing. Weight is 136 kg (300 lb.).16. Put the final drive housing in position on blocks with the planet carrier up. Remove the wire and the forcing screws. 17. Remove pinion (13) from planet carrier (14). Fasten a hoist to the planet carrier and remove it. Weight is 25 kg (55 lb.). Remove O-ring seal (15). 18. Bend the locks away from bolts (17) that hold the retainers and shafts (16) to the planet carrier. Remove the retainers and the shafts.19. Remove washers (20) and gears (19). Remove the bearings from the gears. Remove the ring that holds washer (18) in the carrier with tool (H). Remove washer (18). 20. Remove shaft (21) and the bearing from the housing.21. Remove ring gear (22). 22. Remove bearing (23) from the shaft with tooling (J). 23. Remove two bearing cups (24) from the housing with tooling (K).24. Do Steps 1 through 23 for the other final drive.Assemble Final Drives
1. Lower the temperature of bearing cup (24) and install it in the housing.2. Install the seal in the housing with tooling (J). Install the seal with the lip toward bearing cup (24). Put clean oil on the lip of the seal. 3. Lower the temperature of bearing cup (25) and install it in the housing. Install ring gear (22).4. Heat bearing (26) in oil to a temperature of 135° C (275° F). Install the bearing on shaft (21). Install the shaft and the bearing in the housing. 5. Install washer (18) in carrier (14). Install ring (27) in the carrier with tool (B). 6. Install the bearings in gears (19). Put the gears and the washers in position in the carrier.7.
A wire must be installed on the two forcing screws and around the ring gear and planet carrier to keep them from falling. Do not remove inner housing (11) further, until the wire is installed.
15. Remove the inner housing. Weight is 136 kg (300 lb.).16. Put the final drive housing in position on blocks with the planet carrier up. Remove the wire and the forcing screws. 17. Remove pinion (13) from planet carrier (14). Fasten a hoist to the planet carrier and remove it. Weight is 25 kg (55 lb.). Remove O-ring seal (15). 18. Bend the locks away from bolts (17) that hold the retainers and shafts (16) to the planet carrier. Remove the retainers and the shafts.19. Remove washers (20) and gears (19). Remove the bearings from the gears. Remove the ring that holds washer (18) in the carrier with tool (H). Remove washer (18). 20. Remove shaft (21) and the bearing from the housing.21. Remove ring gear (22). 22. Remove bearing (23) from the shaft with tooling (J). 23. Remove two bearing cups (24) from the housing with tooling (K).24. Do Steps 1 through 23 for the other final drive.Assemble Final Drives
1. Lower the temperature of bearing cup (24) and install it in the housing.2. Install the seal in the housing with tooling (J). Install the seal with the lip toward bearing cup (24). Put clean oil on the lip of the seal. 3. Lower the temperature of bearing cup (25) and install it in the housing. Install ring gear (22).4. Heat bearing (26) in oil to a temperature of 135° C (275° F). Install the bearing on shaft (21). Install the shaft and the bearing in the housing. 5. Install washer (18) in carrier (14). Install ring (27) in the carrier with tool (B). 6. Install the bearings in gears (19). Put the gears and the washers in position in the carrier.7.
Cat SIS web machinery list:
Parts catch Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 416B, 416C, 426B, 426C, 428B, 436C, 438B, 446B, 511, 515, 521, 521B, 522...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 416B, 416C, 426B, 426C, 428B, 436C, 438B, 446B, 511, 515, 521, 521B, 522...
307B, 311B, 312, 312B L, 312C, 312D, 315, 315B L, 315C, 315D L, 317, 317B LN, 318B, 318C, 319C, 319D, 320B, 320B FM LL, 320C, 322 FM L, 322B L, 322B LN, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 3...
4I4300
CATCH
307B, 307C, 307D, 311, 311B, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318...
307B, 307C, 307D, 311, 311B, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN,...
2597352
CATCH
307D, 308E CR, 308E SR, 311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D...
307D, 308E CR, 308E SR, 311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D...
3858757
CATCH AS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
3639351
CATCH
312D L, 312E, 315D L, 316E L, 320D, 320D RR, 320E, 320E RR
312D L, 312E, 315D L, 316E L, 320D, 320D RR, 320E, 320E RR
3232229
CATCH AS
1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 568 FM LL
1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 568 FM LL
3256732
CATCH AS
1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 568 FM LL
1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 330D FM, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 568 FM LL
3663612
CATCH
320D FM, HH44 DE
320D FM, HH44 DE
4I4300
CATCH
307B, 307C, 307D, 311, 311B, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318...
307B, 307C, 307D, 311, 311B, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318...
6I5432
CATCH
311B, 318B, 320, 320 L, 320B, 325, 325B, 345B II
311B, 318B, 320, 320 L, 320B, 325, 325B, 345B II
0993603
CATCH
307, 307B, 311, 311B, 312B, 315, 318B, 320 L, 320B, 320N, 322 FM L, 322B L, 325, 325B, 330, 330 FM L, 330 L, 345B II, 345B L, E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
307, 307B, 311, 311B, 312B, 315, 318B, 320 L, 320B, 320N, 322 FM L, 322B L, 325, 325B, 330, 330 FM L, 330 L, 345B II, 345B L, E110B, E120B, E140, E200B, E240C, E300B, E70B, EL240B
1327594
CATCH
313B
313B
1327595
CATCH
313B, 321B
313B, 321B
1572368
CATCH AS
301.5, 301.6C, 302.5, 302.5C, 303.5, 304.5
301.5, 301.6C, 302.5, 302.5C, 303.5, 304.5
3858757
CATCH AS
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 336D, 336D L, 336D2, 336D2 L, 340D L, 340...
3532006
CATCH
206, 308D, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
206, 308D, 314D CR, 314D LCR, 314E CR, 314E LCR, 321D LCR
2597352
CATCH
307D, 308E CR, 308E SR, 311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D...
307D, 308E CR, 308E SR, 311D LRR, 311F LRR, 312D, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 318D L, 318D2 L, 320D, 320D GC, 320D L, 320D LRR, 320D...
2526606
CATCH
305
305
311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN,...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...