CLAMP-BAND 3905130 - Caterpillar

Illustration 9 g03326726
Remove four bolts (B), four washers (C) and two plates (D) on right-hand platform as shown In Illustration 10. Save parts for reuse later.
Remove two bolts (H) two washers (C) and plate (D) as shown in Illustration 10. Save plate for reuse later and discard bolts and washers.
Remove guard (A) and discard part.
On guard (L) remove four bolts (K), four washers (C) and two plates (D) as shown in Illustration 9. On guard (L) remove two bolts (B), two washers (C) and one plate (D) as shown in Illustration 9. Save parts for reuse later.
Illustration 10 g03326727
Remove plate assembly (J) and discard part.
On guard (L) remove four bolts (B), four washers (C) and two plates (D) as shown in Illustration 10. Save parts for reuse later.
Remove guard (L) and discard part.
Remove two locknuts (M), four washers (N), two bolts (P) and strap (R) as shown in Illustration 9. Save parts for reuse later.
Remove four bolts (F) and four washers (G) as shown in Illustration 9. Save parts for reuse later.
Remove plate assembly (E) and discard part.
Illustration 11 g03326728
Install new support assembly (1) using four bolts (F) and four washers (G) that were removed in Step 9 as shown in Illustration 11. Tighten bolts to 460 60 N m (339 44 lb ft).
Install strap (R) that was removed in Step 8 using two bolts (P), four washers (N) and two locknuts (M) that were removed in Step 8 as shown in Illustration 11. Tighten locknuts to 105 20 N m (77 15 lb ft).
Illustration 12 g03326729
Install new bracket assembly (2) to right-hand platform using four bolts (B) and four washers (C) that were removed in Step 1 as shown in Illustration 11. Tighten bolts to 55 10 N