3C8106 CONVERSION KIT Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8106
3C-8106
3C8106
CA3C8106
3C-8106
3C8106
Information:
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
The high pressure fuel lines are the fuel lines that are between the high pressure fuel pump and the high pressure fuel manifold and the fuel lines that are between the fuel manifold and cylinder head. These fuel lines are different from fuel lines on other fuel systems.This is because of the following differences:The high pressure fuel lines are constantly charged with high pressure.The internal pressures of the high pressure fuel lines are higher than other types of fuel system.The high pressure fuel lines are formed to shape and then strengthened by a special process.Do not step on the high pressure fuel lines. Do not deflect the high pressure fuel lines. Do not bend or strike the high pressure fuel lines. Deformation or damage of the high pressure fuel lines may cause a point of weakness and potential failure.Do not check the high pressure fuel lines with the engine or the starting motor in operation. Stop the engine. Wait for 5 minutes in order to allow the pressure to be purged before any service or repair is performed on the engine fuel lines.Do not loosen the high pressure fuel lines in order to remove air from the fuel system. This procedure is not required.Visually inspect the high pressure fuel lines before the engine is started. This inspection should be each day.If you inspect the engine in operation, always use the proper inspection procedure in order to avoid a fluid penetration hazard. Refer to Operation and Maintenance Manual, "General hazard Information".Inspect the high pressure fuel lines for damage, deformation, a nick, a cut, a crease, or a dent.Do not operate the engine with a fuel leak. If there is a leak do not tighten the connection in order to stop the leak. The connection must only be tightened to the recommended torque. Refer to Disassembly and Assembly for your engine.If the high pressure fuel lines are torqued correctly and the high pressure fuel lines are leaking the high pressure fuel lines must be replaced.Ensure that all clips on the high pressure fuel lines are in place. Do not operate the engine with clips that are damaged, missing or loose.Do not attach any other item to the high pressure fuel lines.
Parts conversion Caterpillar catalog:
3C8105
CONVERSION KIT
Caterpillar
Caterpillar
3C7093
CONVERSION G-
Caterpillar
Caterpillar
3C7089
CONVERSION G-
Caterpillar
Caterpillar
3C7088
CONVERSION G-
Caterpillar
Caterpillar
3C7008
CONVERSION KIT
Caterpillar
Caterpillar
3A7533
CONVERSION AR
Caterpillar
Caterpillar
3C8154
CONVERSION KIT
Caterpillar
Caterpillar
3C8156
CONVERSION KIT
Caterpillar
Caterpillar
3C8157
CONVERSION KIT
Caterpillar
Caterpillar
3C8163
CONVERSION GP
Caterpillar
Caterpillar
3C8240
CONVERSION
Caterpillar
Caterpillar
3C8241
CONVERSION
Caterpillar
Caterpillar