CONVERSION AR 5089008 - Caterpillar

Removal Procedure
Start By:
Remove the right side engine panel. Refer to Disassembly and Assembly, "Side Panel - Remove and Install".
Illustration 1 g01519298
Turn battery disconnect switch (1) to the OFF position.
Illustration 2 g01519306
Release the tension on belt tensioner (3) in order to position belt (2) out of the way.
Illustration 3 g01519311
Disconnect cable assembly (6) .
Disconnect harness assemblies (5) .
Remove bolt (4) and bolt (7). Remove alternator (8) .Installation Procedure
Illustration 4 g01519311
Position alternator (8). Install bolts (7) and (8). Tighten bolts (7) and (8) to a torque of 22 N m (16 lb ft).
Connect harness assemblies (5). Tighten the nuts for harness assemblies (5) to a torque of 4.5 0.5 N m (39.8 4.4 lb in).
Connect cable assembly (6). Tighten the nut for cable assembly (6) to a torque of 7.8 2.0 N m (69.0 17.7 lb in).
Illustration 5 g01519306
Rotate belt tensioner (3) in order to install belt (2) .
Illustration 6 g01519298
Turn battery disconnect switch (1) to the ON position.End By: Install the right side engine panel. Refer to Disassembly and Assembly, "Side Panel - Remove and Install".