COVER AS 2444127 - Caterpillar

Installation Procedure
Rotate the engine to position the piston toward top dead center for easy access. Refer to Testing and Adjusting, "Finding Top Center position for No. 1 Piston".
Illustration 1 g02400820
Note: Point dowel (5) toward the connecting rod as shown. If, dowel (5) is pointed toward the crankshaft main will cause improper spray.
Install piston cooling jet (4) with dowel (5) pointed inward toward the connecting rod. Install bolts (3) .
Illustration 2 g01459651
Install side cover (2). Install bolts (1) .
Repeat Steps 2 and 3 for the remaining piston cooling jets.
If necessary, install components removed for access to the side covers.
Turn the battery disconnect switch to the ON position.