COVER AS 3905114 - Caterpillar

Electric Power Generation:
3516C GEN SET (S/N: SBK1-UP)
Engine:
3508B (S/N: 6PN1-UP)
3512B (S/N: PTF1-UP; PTM1-UP)
3512C (S/N: SBG1-UP)
3516B (S/N: PBR1-UP; 8NW1-UP)
C7 (S/N: JRA1-UP; JTF1-UP)
Generator Set:
C15 GEN SET (S/N: C5E1-UP)
C18 GEN SET (S/N: EKW1-UP)
C18 MARINE GS (S/N: MGS1-UP)
C27 GEN SET (S/N: DWB1-UP)
C32 GEN SET (S/N: SXC1-UP)
C9 GEN SET (S/N: C9E1-UP)
Industrial Engine:
C11 INDUSTRIAL (S/N: GLS1-UP)
C13 INDUSTRIAL (S/N: LGK1-UP)
C15 IND (S/N: JRE1-UP)
C18 INDUSTRIAL (S/N: WJH1-UP)
C27 INDUSTRIAL (S/N: TWM1-UP)
C32 INDUSTRIAL (S/N: TLD1-UP)
C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP)
Petroleum Engine:
3508C PETROLEUM (S/N: LLE1-UP)
Power Module:
PM3516 (S/N: KEN1-UP)
Field reports have indicated low coolant levels when the proper coolant levels are evident on the engines that are listed above. The returned parts have been analyzed, and it has been determined that the proper torque procedure has not been followed.When you replace the coolant level sensor, use the following guidelines:
Use correct torque of 20 3 N m (15 2 lb ft) during installation process.
When installing coolant level sensor do not apply additional sealer.