DOOR AS 1398382 - Caterpillar

1398382 DOOR AS Caterpillar parts 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325B L, 330 L, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 375, 385B, 5080, 5090B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1398382
139-8382
1398382

Weight: 77 pounds 34 kg.

Buy DOOR AS 1398382 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, FRONT SHOVEL,

Compatible equipment models: 1398382:

EXCAVATOR 311B 312 312B L 315 315B L 317 317B LN 318B 320B 322B LN 325B L 330 L 330B L 345B II 345B L 350 350 L 365B 365B II 375 385B

FRONT SHOVEL 5080 5090B Caterpillar

Number on catalog scheme: 1

Caterpillar 1398382 Parts scheme DOOR AS

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-5809 Electric Hydraulic Pump Gp 1
9U-7536 Lift Stand 2
B 132-8223 Power Pack 1
132-8119 Hydraulic Torque Wrench Assembly 1
C 183-4799 Track Roller Lifting Fork 1
FT-2930 Fork Extension Assembly 2 Note: There is a track guide on each side of the machine. The procedure which follows is for the removal of the track roller with the track guide.
Start the engine. Park the machine on a hard, level surface. Stop the engine.
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Illustration 1 g00612079
Release the tension on the track assembly. Slowly loosen relief valve (1) for the track adjuster. Do not loosen the relief valve more than one turn.Note: If the track assembly does not loosen after you open the relief valve. Rotate the track forward and backward until the track tension is released.
Illustration 2 g00611990
Use Tooling (B) and loosen four bolts (3) that hold track guide (2) to the track roller frame assembly. Note: Do not remove the bolts at this time.
Illustration 3 g00611992
Use Tooling (B) and loosen four bolts (5) that secure track roller (4) to the track roller frame assembly. Note: Do not remove the bolts at this time.
Illustration 4 g00875408
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the track roller and the track roller frame assembly for the removal of the track roller.
Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 5 g01281960
Fasten a suitable lifting device to Tooling (C) and position Tooling (C) under track guide (2). Remove four bolts (3) and the spacers. Remove track guide (2). The weight of track guide (2) is approximately 90 kg (200 lb).
Illustration 6 g00611815
Use a suitable lifting device and remove track guide (2) from the machine. The weight of track guide (2) is approximately 82 kg (180 lb).
Illustration 7 g00611817
Fasten a suitable lifting device to Tooling (C) and position Tooling (C) under track roller (4), as shown. Remove bolts (5) and the washers that secure track roller (4). Remove track roller (4) from the machine. The weight of track roller (4) is approximately 136 kg (300 lb).