4Z8120 EDGE-CUTTING Caterpillar parts
Rating:
Alternative (cross code) number:
CA4Z8120
4Z-8120
4Z8120
CA4Z8120
4Z-8120
4Z8120
Weight: 79 pounds 35 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
21
mm
CHAMFER
EDGE
HOLE PATTERN
OFFSET
HOLE SPACING
304.8
mm
LENGTH
1521.1
mm
NUMBER OF HOLES
7
THICKNESS
16
mm
TUNGSTEN CARBIDE
N
WIDTH
203.2
mm
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Dealers report fuel leaks from the 382-0664 and 438-5386 Water Separator and Fuel Filter As . The leak can be seen from the bottom of the filter at the drain valve and/or the sensor port.Solution
Inspect the 382-0664 and 438-5386 Water Separator and Fuel Filter As prior to installation on the machine. If the bottom of the filter appears similar to Illustration 2 or Illustration 3, do not use the filter.Handle the 382-0664 and 438-5386 filters with care. Overstacking, dropping, or any other action that might apply impact force to the drain valve and/or plug on the bottom of the filter must be avoided.Note: Illustration 1 shows a filter in good condition. Illustration 2 shows the bottom of the filter pushed-in after impact force upon the drain valve. Illustration 3 shows the paint peeling around the plug, indicating that the bottom of the filter housing has been pushed-in.
Illustration 1 g03800036
Illustration 2 g03800037
Illustration 3 g03800038
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Dealers report fuel leaks from the 382-0664 and 438-5386 Water Separator and Fuel Filter As . The leak can be seen from the bottom of the filter at the drain valve and/or the sensor port.Solution
Inspect the 382-0664 and 438-5386 Water Separator and Fuel Filter As prior to installation on the machine. If the bottom of the filter appears similar to Illustration 2 or Illustration 3, do not use the filter.Handle the 382-0664 and 438-5386 filters with care. Overstacking, dropping, or any other action that might apply impact force to the drain valve and/or plug on the bottom of the filter must be avoided.Note: Illustration 1 shows a filter in good condition. Illustration 2 shows the bottom of the filter pushed-in after impact force upon the drain valve. Illustration 3 shows the paint peeling around the plug, indicating that the bottom of the filter housing has been pushed-in.
Illustration 1 g03800036
Illustration 2 g03800037
Illustration 3 g03800038
Parts edge Caterpillar catalog:
4Z8056
EDGE CUTTING
Caterpillar
Caterpillar
4Z4126
EDGE-CUTTING
Caterpillar
Caterpillar
4Z4125
EDGE-CUTTING
Caterpillar
Caterpillar
4Y2724
EDGE
Caterpillar
Caterpillar
4V5044
EDGE A
Caterpillar
Caterpillar
4V3373
EDGE
Caterpillar
Caterpillar
4Z8926
EDGE
Caterpillar
Caterpillar
4Z8790
EDGE-CUTTING
Caterpillar
Caterpillar
4Z8785
EDGE
Caterpillar
Caterpillar
4Z8619
EDGE-CUTTING
Caterpillar
Caterpillar
4Z8595
EDGE GP-BIT&
Caterpillar
Caterpillar
4Z8131
EDGE-CUTTING
Caterpillar
Caterpillar