EDGE- 5087705 - Caterpillar

Bucket Dump (17) - Move the joystick to this position in order to dump the bucket or the work tool.
Stick In (18) - Move the joystick to this position in order to move the stick inward.
Bucket Close (19) - Move the joystick to this position in order to close the bucket or the work tool.HOLD (20) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Manual Kick Down Button
Illustration 6 g01450308The manual kick down feature allows the operator to reduce the engine speed to low idle by pressing the manual kick down button. The engine speed will be reduced to low idle if the following conditions occur:
The hydraulic implement is at idle and the auxiliary is at idle.
The transmission is in the NEUTRAL position.
The operator seat is not latched facing the loader.
The throttle control is set above low idle.Once this feature is active, the Automatic Engine Speed Control indicator will illuminate. The operator can increase the engine speed to the throttle setting by doing any of the following:
Pressing the manual kick down button.
Moving the throttle control to low idle.
Moving the implement joystick or moving the thumb roller.Warning State
In order to ensure safe operation of the machine, use of the transmission direction control is not allowed while the Automatic Engine Speed Control (AESC) and the manual kick down features are active.If the operator engages the transmission direction control or the operator latches the operator seat to the loader position while the Automatic Engine Speed Control is active or while the manual kick down is active the machine controller will do the following:
The transmission remain in the NEUTRAL position.
The manual kick down button will be disabled.
Will maintain the current reduced speed.
The Automatic Engine Speed Control indicator will flash.
The audible alarm feature will activate.In order to cancel the warning state the operator must put the transmission in the NEUTRAL position or the operator must release the operator seat from the loader facing position. This action will return the Automatic Engine Speed Control or the manual kick down to the previous state. The operator may also put the transmission in the NEUTRAL position and reduce the throttle control to low idle. This control of the engine speed will be returned to the throttle control while the operator seat is in the loader position.If the operator is required to move the machine without time to follow the instructions listed, the Automatic Engine Speed Control and the manual kick down can be cancelled by performing one of the following:
With the parking brake engaged the operator can perform a double transmission shift. The operator moves the transmission to the NEUTRAL to FORWARD to NEUTRAL to FORWARD positions or the operator moves the transmission to the NEUTRAL to REVERSE to NEUTRAL to REVERSE positions within three seconds. The warning will be cancelled after the NEUTRAL to FORWARD to NEUTRAL movement or