AVSPARE.COM
parts catalog

EDGE-CUTTING 7T5105 - Caterpillar


7T5105 EDGE-CUTTING Caterpillar parts 615
Rating:
17
Alternative (cross code) number:
CA7T5105
7T-5105
7T5105
Caterpillar 7T5105 EDGE-CUTTING
Weight: 62 pounds 28 kg.
Information:
ABRASION RESISTANT MATERIAL 
BOLT HOLE SIZE  25  mm
CHAMFER  EDGE 
HOLE PATTERN  2 ROW C/L 
HOLE SPACING  152.4  mm
LENGTH  548.2  mm
NUMBER OF HOLES 
THICKNESS  22  mm
TUNGSTEN CARBIDE 
WIDTH  330  mm

Buy EDGE-CUTTING 7T5105 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SCRAPER,

Compatible equipment models: 7T5105:

WHEEL SCRAPER  615   Caterpillar
Number on catalog scheme: 4
  For full view, you need register

Information:


Illustration 1 g00100945
Window Wiper (A) - Push the switch in order to activate the window wiper. Whenever the switch is depressed, the mode of the window wiper will change according to the indicator light that is illuminated. Mode (1) - When switch (A) is depressed one time, indicator light (1) will turn on. The window wiper will operate intermittently at six second intervals.Mode (2) - When switch (A) is depressed two times, indicator light (2) will turn on. The window wiper will operate intermittently at three second intervals.Mode (3) - When switch (A) is depressed three times, indicator light (1) and (2) will turn on. The window wiper will operate continuously.Mode (4) - When switch (A) is depressed four times, the indicator lights will turn off. The window wiper stops.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result.
Window Washer (B) - Push the switch in order to activate the window washer. While the switch is depressed, indicator light (3) will come on and washer fluid will spray from the nozzle. The window wiper will also operate while the switch is depressed. After the switch is released for approximately three seconds, the window wiper will stop.
If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.
Illustration 2 g00100949
Lower Window Wiper (If Equipped) - Push down the right half of the switch in order to turn on the lower window wiper. Push down the left half of the switch in order to turn off the lower window wiper.
If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result.
Illustration 3 g00100952
Lower Window Washer (If Equipped) - Push down the right half of the switch and keep the switch depressed in order to activate the lower window washer. While the switch is depressed, the washer fluid will spray from the nozzle. The window wiper will also function. When you release the switch, the window washer will stop. The window wiper will continue to function.
If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result.

Caterpillar parts catalog:

Caterpillar parts catalog
615 ELEVATING SCRAPER 47Z00001-UP (MACHINE)


Parts edge Caterpillar catalog:

6W2985 EDGE-CUTTING
936, 936F, G936
6W2984 EDGE-CUTTING
930R, 936, 936F
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.