ENGINE AR-CORE 1318300 - Caterpillar

Illustration 15 g01107206
Disconnect harness assemblies (33) .
Remove bolts (34) and cable straps (32). Move harness assemblies (33) out of the way.
Illustration 16 g01107247
Disconnect harness assembly (35) from the coolant sensor.
Disconnect harness assemblies (37) from alternator (36) .
Illustration 17 g01107208
Remove the bolt and ground cable (38) from the engine.
Illustration 18 g01107248
Remove bolt (39) and cable assembly (40) from both sides of the engine.
Illustration 19 g01107252
Disconnect harness assemblies (41) and (42) .
Illustration 20 g01107253
Disconnect hose assemblies (43). Remove cable straps and move valve (13) out of the way.
Illustration 21 g01107413
Disconnect hose assemblies (45) and (46) .
Remove filter assembly (44) .
Illustration 22 g01107414
Drain transmission (31) into a suitable container. The capacity of transmission (31) is approximately 24 L (6.3 US gal). Refer to Operation and Maintenance Manual, "Transmission Oil and Filter - Change".
Disconnect hose assembly (47) .
Illustration 23 g01107423
Disconnect harness assembly (48) .
Remove bolts (51) and two indicator plates (50). Disconnect drive shaft (49) from transmission (31) .
Illustration 24 g01107425
Remove clamp (52) and drain hoses (53) .
Illustration 25 g01107426
Remove drain hose (54) .
Illustration 26 g01107486
Attach Tooling (A) to the engine and transmission (55), as shown.
Illustration 27 g01107532
Remove bolts (56). Remove the engine and transmission (55) as a unit. The weight of the engine and transmission (55) is approximately 873 kg (1924 lb).
Illustration 28 g01112949
Remove mounts (57) .