1452009 ENGINE AR-COMPLETE Caterpillar parts
C-10
Rating:
Alternative (cross code) number:
CA1452009
145-2009
1452009
CA1452009
145-2009
1452009
TRUCK ENGINE,
Compatible equipment models: 1452009:
For full view, you need register
Information:
Removal Procedure
Illustration 1 g03728597
Use a suitable tool to disconnect harness assembly (3) from soot antenna (2).
Repeat Step 1 in order to disconnect the remaining harness assembly from the remaining soot antenna.
Remove soot antenna (2) from the assembly of the Clean Emissions Module (CEM) (1).
Repeat Step 3 In order to remove the remaining soot antenna.
Illustration 2 g03738277
If necessary, follow Step 5.a through Step 5.c in order to remove soot antenna monitor (4). Refer to the Original Equipment Manufacture (OEM) for the correct location of soot antenna monitor.
If necessary, use a suitable tool to disconnect harness assemblies (3) from the soot antennas.
Disconnect the OEM harness assembly (6) from soot antenna monitor (4).
Remove bolts (5) from soot antenna monitor (4). Remove the soot antenna monitor from the bracket. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bostik Pure Nickel
Anti-Seize Compound 1
B - 19 mm Crows Foot 1
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 3 g03738277
If necessary, follow Step 2.a through Step 2.c in order to install soot antenna monitor (4). Refer to the OEM for the correct location of soot antenna monitor.
Install soot antenna monitor (4) onto the bracket. Install bolts (5) to the soot antenna monitor. Tighten the bolts to a torque of 12 N m (106 lb in).
Connect the OEM harness assembly (6) to soot antenna monitor (4).
If necessary, connect harness assemblies (3) to the soot antennas. Tighten the connection for the harness assemblies to a torque of 1.2 N m (11 lb in).
Illustration 4 g03728597
If new soot antennas are to be install, the protective cover on the new soot antenna will need to be removed prior to installation.
Lightly lubricate the thread of soot antenna (2) with Tooling (A). Install soot antenna (2) to CEM (1).
Use Tooling (B) to tighten soot antenna (2) to a torque of 45 N m (33 lb ft).
Repeat Step 3 in order to install the remaining soot antenna.
Connect harness assembly (3) to soot antenna (2). Use a suitable tool to tighten the harness assembly to a torque of 1.2 N m (11 lb in).
Repeat Step 7 in order to connect the remaining harness assembly.
Illustration 1 g03728597
Use a suitable tool to disconnect harness assembly (3) from soot antenna (2).
Repeat Step 1 in order to disconnect the remaining harness assembly from the remaining soot antenna.
Remove soot antenna (2) from the assembly of the Clean Emissions Module (CEM) (1).
Repeat Step 3 In order to remove the remaining soot antenna.
Illustration 2 g03738277
If necessary, follow Step 5.a through Step 5.c in order to remove soot antenna monitor (4). Refer to the Original Equipment Manufacture (OEM) for the correct location of soot antenna monitor.
If necessary, use a suitable tool to disconnect harness assemblies (3) from the soot antennas.
Disconnect the OEM harness assembly (6) from soot antenna monitor (4).
Remove bolts (5) from soot antenna monitor (4). Remove the soot antenna monitor from the bracket. Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bostik Pure Nickel
Anti-Seize Compound 1
B - 19 mm Crows Foot 1
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 3 g03738277
If necessary, follow Step 2.a through Step 2.c in order to install soot antenna monitor (4). Refer to the OEM for the correct location of soot antenna monitor.
Install soot antenna monitor (4) onto the bracket. Install bolts (5) to the soot antenna monitor. Tighten the bolts to a torque of 12 N m (106 lb in).
Connect the OEM harness assembly (6) to soot antenna monitor (4).
If necessary, connect harness assemblies (3) to the soot antennas. Tighten the connection for the harness assemblies to a torque of 1.2 N m (11 lb in).
Illustration 4 g03728597
If new soot antennas are to be install, the protective cover on the new soot antenna will need to be removed prior to installation.
Lightly lubricate the thread of soot antenna (2) with Tooling (A). Install soot antenna (2) to CEM (1).
Use Tooling (B) to tighten soot antenna (2) to a torque of 45 N m (33 lb ft).
Repeat Step 3 in order to install the remaining soot antenna.
Connect harness assembly (3) to soot antenna (2). Use a suitable tool to tighten the harness assembly to a torque of 1.2 N m (11 lb in).
Repeat Step 7 in order to connect the remaining harness assembly.