ENGINE AR-COMPLETE 1585246 - Caterpillar

TARGET="_parent">Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Film (Product Identification) - Clean
Fuel System - Prime
Fuses - Replace
Oil Filter - Inspect
Radiator Core - Clean
Water and Additive Spray Nozzles - Clean
Water Spray System - Drain
Wheel Nuts - Tighten
Every 10 Service Hours or Daily
Backup Alarm - Test
Cooling System Coolant Level - Check
Drum Scrapers - Inspect/Adjust/Replace
Engine Air Filter Service Indicator - Inspect
Engine Oil Level - Check
Hydraulic System Oil Level - Check
Neutral Start Switch - Test
Operator Presence Switch - Test
Seat Belt - Inspect
Tire Scraper - Inspect/Adjust/Replace
Water Spray System Filter - Clean
Initial 50 Service Hours
Wheel Nuts - Tighten
Every 50 Service Hours or 2 Weeks
Tire Inflation - Check
Every 100 Service Hours or 2 Weeks
Fuel System Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Water Tank Strainer - Clean and Inspect
Every 250 Service Hours
Engine Oil Sample - Obtain
Every 250 Service Hours or 3 Months
Belts - Inspect/Adjust/Replace
Steering Cylinder Ends - Lubricate
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Fuel Tank Strainer - Clean
Every 500 Service Hours or 3 Months
Cooling System Coolant Sample (Level 1) - Obtain
Every 500 Service Hours or 1 Year
Braking System - Test
Engine Oil and Filter - Change
Fuel System Water Separator Element - Replace
Hydraulic System Oil Filter - Replace
Hydraulic System Oil Sample - Obtain
Isolation Mounts - Inspect
Every 1000 Service Hours or 1 Year
Battery - Clean/Check
Cooling System Pressure Cap - Clean/Replace
Engine Mounts - Inspect
Engine Valve Lash - Check
Hydraulic Tank Breather - Replace
Hydraulic Tank Strainer - Clean
Rollover Protective Structure (ROPS) - Inspect
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours
Eccentric Weight Bearings - Inspect
Engine Water Pump - Inspect
Every 3000 Service Hours or 18 Months
Hydraulic System Oil - Change
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change