ENGINE AR-COMPLETE 1759214 - Caterpillar

Illustration 8 g03122627
Click on "Status" button (13) .
Check "Active Codes" (14). Clear any open "Active Codes".
Illustration 9 g03122629
Click on "Hydraulics" icon (15) .
Illustration 10 g03122631
Click on "Piston Pump Neutral Test" (16) .
Illustration 11 g03122632
Click on "Enable" icon (17) .
Illustration 12 g03122633
When "Piston Pump Neutral Test" (16) is in "Enabled" mode (18), the Plus+1TM program is launched.
Read differential pressure on Tool (A). Differential pressure should be less than 70 kPa (10 psi).
If, the differential pressure is greater than 70 kPa (10 psi) go to Step 30. If, the differential pressure is less than 70 kPa (10 psi) go to Step 32.
Illustration 13 g03122634
Note: A small movement of the adjustment mechanism is all that will be required.
Hold adjustment screw (20) and loosen locknut (19). Watch the pressure gauges. Rotate adjustment screw (14) until the differential pressure is less than 70 kPa (10 psi).
Hold adjustment screw (20) in place and tighten locknut (19). Tighten locknut (19) to a torque of 10 N m