1794061 ENGINE AR-COMPLETE Caterpillar parts
3406E
Rating:
Alternative (cross code) number:
CA1794061
179-4061
1794061
CA1794061
179-4061
1794061
TRUCK ENGINE,
Related part:
1794061
ENGINE AR-COMPL
20R6605
R
Compatible equipment models: 1794061:
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Illustration 1 g02048773
Typical example
Make a temporary mark on idler pulley (2) in order to identify the correct orientation and the position.
Loosen bolt (1) and remove idler pulley (2) from bracket. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02048794
Typical example
Ensure that all components of the idler pulley are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Position idler pulley (2) on the bracket. Tighten bolt (1) hand tight.
Tighten the bolt to a torque of 44 N m (32 lb ft).
Rotate the pulley in order to ensure that the pulley rotates freely. End By:
Install alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.
Illustration 1 g02048773
Typical example
Make a temporary mark on idler pulley (2) in order to identify the correct orientation and the position.
Loosen bolt (1) and remove idler pulley (2) from bracket. Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02048794
Typical example
Ensure that all components of the idler pulley are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Position idler pulley (2) on the bracket. Tighten bolt (1) hand tight.
Tighten the bolt to a torque of 44 N m (32 lb ft).
Rotate the pulley in order to ensure that the pulley rotates freely. End By:
Install alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install" for the correct procedure.