1915391 ENGINE AR-CORE Caterpillar parts
C-10
Rating:
Alternative (cross code) number:
CA1915391
191-5391
1915391
CA1915391
191-5391
1915391
INDUSTRIAL ENGINE,
Related part:
1915391
SHORT BLOCK
0R9661
R
1915391
LONG BLOCK M
20R0248
R
Compatible equipment models: 1915391:
For full view, you need register
Information:
Removal Procedure
Illustration 1 g01126476
Drive the machine onto suitable cribbing (2). Attach a suitable lifting device onto ripper shank (1). The weight of ripper shank (1) is approximately 885 kg (1950 lb).Note: For multi-shank machines each ripper shank weighs approximately 530 kg (1170 lb).
Raise the ripper to the maximum height. Refer to Operation and Maintenance Manual, "Ripper Control".
Apply slight lifting tension to ripper shank (1) .
Retract the ripper pin.
Lower ripper shank (1) to the ground.Installation Procedure
Illustration 2 g01126476
Attach a suitable lifting device onto ripper shank (2). The weight of ripper shank (1) is approximately 885 kg (1950 lb).Note: For multi-shank machines each ripper shank weighs approximately 530 kg (1170 lb).
Raise ripper shank (1) from the ground.
Engage the ripper pin.
Lower the ripper. Refer to Operation and Maintenance Manual, "Ripper Control".
Drive the machine off suitable cribbing (2) .
Illustration 1 g01126476
Drive the machine onto suitable cribbing (2). Attach a suitable lifting device onto ripper shank (1). The weight of ripper shank (1) is approximately 885 kg (1950 lb).Note: For multi-shank machines each ripper shank weighs approximately 530 kg (1170 lb).
Raise the ripper to the maximum height. Refer to Operation and Maintenance Manual, "Ripper Control".
Apply slight lifting tension to ripper shank (1) .
Retract the ripper pin.
Lower ripper shank (1) to the ground.Installation Procedure
Illustration 2 g01126476
Attach a suitable lifting device onto ripper shank (2). The weight of ripper shank (1) is approximately 885 kg (1950 lb).Note: For multi-shank machines each ripper shank weighs approximately 530 kg (1170 lb).
Raise ripper shank (1) from the ground.
Engage the ripper pin.
Lower the ripper. Refer to Operation and Maintenance Manual, "Ripper Control".
Drive the machine off suitable cribbing (2) .