ENGINE AR-COMPLETE 2199354 - Caterpillar

2199354 ENGINE AR-COMPLETE Caterpillar parts C-10

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2199354
219-9354
2199354

Buy ENGINE AR-COMPLETE 2199354 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2199354:

TRUCK ENGINE C-10 Caterpillar

For full view, you need register

Information:

207-1556
Illustration 1 g00286672
Illustration 2 g00286673
When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25°C (77°F) Speed ... 7643 1683 rpm Current draw ... 76.5 14.5 amp Voltage ... 23 V (1) Three wires are the maximum between the nuts. Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft) (2) Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft) (3) Tighten the ground terminal on the solenoid to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) The switch terminal must be insulated with heat shrink tube. Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft) (6) Tighten the bolt on the motor frame terminal to the following torque. ... 8 3 N m (70 27 lb in)SolenoidCurrent draw at 20 V and 25°C (77°F) Pull-in windings ... 57 Amp Hold-in windings ... 16 Amp237-1962
Illustration 3 g00362864
Illustration 4 g00367673
When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25°C (77°F) Speed ... 6950 1650 rpm Current draw ... 115 25 amp Voltage ... 23 V (1) Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft) (2) Three wires are the maximum between the nuts. Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft) (3) Tighten the ground terminal on the solenoid to the following torque. ... 2.25 0.25 N m (20 2 lb in) (4) The switch terminal must be insulated with heat shrink tube. Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft) (6) Tighten the nut on the motor frame terminal to the following torque. ... 30.5 3.5 N m (21 3 lb ft)SolenoidCurrent draw at 20 V and 25°C (77°F) Pull-in windings ... 49.3 3.3 Amp Hold-in windings ... 6.8 Amp maximum