ENGINE AR-COMPLETE 2229792 - Caterpillar

Illustration 5 g01074107
Remove bolt (12) and retainer (13). Use Tooling (A) and remove spanner nut (14). If necessary, remove bearing cup (15) from brake cylinder (1).
Illustration 6 g01074118
Use Tooling (B) and remove bearing cone (16).
Illustration 7 g01074117
Use Tooling (B) and remove bearing cone (17).
Illustration 8 g01074116
Lock the differential in a vise. Remove bolts (18) and remove bevel gear (19) from the differential.
Illustration 9 g01074163
Remove cover (20). Remove plates (21) and discs (22). Remove side gear (23).
Illustration 10 g01074165
Use a suitable hammer and a punch in order to remove locking pin (24). Remove shaft (25). Remove thrust washers (26) and gears (27).
Illustration 11 g01074168
Remove side gear (28). Remove discs (29) and plates (30).
Illustration 12 g01074217
If necessary, remove bushing (31).
Illustration 13 g01074218
If necessary, remove bushing (32).
Illustration 14 g01074252
Use Tooling (C) and remove retaining ring (33). Remove spacer (34).
Illustration 15 g01074255
Remove locknut (35) out of the locking tab. Use Tooling (D) and Tooling (E) in order to loosen locknut (35). Remove locknut (35), washer (36), and spacer (37).
Illustration 16 g01074268
Tap the end of pinion shaft (38) with a soft faced hammer in order to remove pinion shaft (38).
Illustration 17 g01074272
Remove bearing cone (41), washers (39), and collapsible spacer (40) from pinion shaft (38).
Illustration 18 g01074274
Use Tooling (F) and a suitable press in order to remove bearing cone (42) from pinion shaft (38). Remove the shim that is positioned under bearing cone (42).
Illustration 19 g01074280
Use a suitable hammer and a punch and remove bearing cups (43) from the center housing.