ENGINE AR-COMPLETE 2252274 - Caterpillar

2252274 ENGINE AR-COMPLETE Caterpillar parts C-10

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2252274
225-2274
2252274

Buy ENGINE AR-COMPLETE 2252274 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

$37.61

11 Oct 2023

US: oemcycles

K&S 225-2274 Turn Signal Rear Left
K&S Technologies DOT approved turn signals are exact replacements of complete OEM assemblies, at a fraction of the cost

For full view, you need register

Compatible equipment models: 2252274:

TRUCK ENGINE C-10 Caterpillar

Information:

Install shaft (25) to rotating group (27) .
Illustration 24 g00989896
Install rotating group (27) and shaft (25) into housing (1) .Note: Notches (X) MUST engage Dowels (Y) .
Illustration 25 g00989895
Install shim (26) on shaft (25) .
Illustration 26 g00989894
Install bearing cone (24) onto shaft (25) .
Illustration 27 g00989887
Install lens plate (21) onto head (2) .Note: Take note of the slot in the reverse side of lens plate (21) . The slot will receive dowel (22) in head (2) .
Illustration 28 g00989884
Install O-ring seal (20) on cover (2) .
Illustration 29 g00989882
Install head (2) onto housing (1) .
Illustration 30 g00989878
Secure head (2) to the housing with bolts (18) .
Install O-ring seals (19) into head (2) .
Illustration 31 g00989730
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install disc (17) to head (2) .
Install pressure spring (16) to head (2) .
Install O-ring seal (15) to lock screw (14) .
Install lock screw (14) to head (2) .
Illustration 32 g00989727
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install retainer (10) to head (2) .
Install orifice (11) to head (2) .
Install piston valve (12) to head (2) .
Install pressure spring (13) to head (2) .
Install O-ring seal (8) to plug (9) .
Install plug (9) to head (2) .
Illustration 33 g00989718
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (5) to head (2) .
Install disc (6) to head (2) .
Install pressure spring (7) to head (2) .
Install O-ring seal (3) to lock screw (4) .
Install lock screw (4) to head (2) .End By: Install the piston motor. Refer to Disassembly and Assembly, "Piston Motor (Vibratory) - Install ".