6V0402 FLANGE-HALF Caterpillar parts
5110B, 5130, 5130B, 5230, 5230B, 797, 797B, 797F, 992K, 993K, S25
Rating:
Alternative (cross code) number:
CA6V0402
6V-0402
6V0402
CA6V0402
6V-0402
6V0402
Weight: 2 pounds 0 kg.
Information:
BOLT HOLE DIAMETER/THREAD
21.0
mm
BOLT PATTERN LENGTH
96.8
mm
BOLT PATTERN WIDTH
44.4
mm
COUNTERBORE DEPTH
13.5
mm
COUNTERBORE DIAMETER
80
mm
DASH SIZE
000000000032
PORT COVER PART NUMBER
5P0050
MINING EXCAVATOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$13.76
30 Dec 2019
2.1[0.90] Pounds
-: -
CTP Caterpillar Flange-spl (6v0402) Aftermarket
Number on catalog scheme:
41
For full view, you need register
Compatible equipment models: 6V0402:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines".
Ensure that all of the parts of the engine oil pump are thoroughly clean prior to assembly. Note: Lubricate all internal parts of the engine oil pump with clean engine oil.
Illustration 1 g00824021
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install oil pressure relief plunger (13) and spring (14) in oil pump body assembly (7). Install the washer and the bolt.
Illustration 2 g00614694
Illustration 3 g00614689
Install shaft assembly (12) in oil pump body (9).
Install shaft assembly (11) in oil pump body (9).
Position oil pump body (9) on oil pump body assembly (7) and install bolts (10).
Illustration 4 g00614683
Press drive gear (8) on shaft assembly (11) until drive gear (8) is flush with the end of shaft assembly (11).
Install oil pump shaft (6). Install the bearing in idler gear (5) with Tooling (A). Install the bearing so the distance between the hub bolt face of idler gear (5) and the bearing is 0.75 0.25 mm (0.030 0.010 inch).
Illustration 5 g00614677
Install idler gear (5) on oil pump shaft (6). Install washer (4) and bolt (3). Tighten bolt (3) to 70 15 N m (52 11 lb ft).
Illustration 6 g00614664
Check the condition of the gasket that is used in tube assembly for the pickup of oil (2). If the gasket is damaged, replace the gasket. Install the gasket and tube assembly for the pickup of oil (2).
Check the condition of the O-ring seal that is used in outlet elbow (1). If the O-ring seal is damaged, replace the O-ring seal. Install the O-ring seal and outlet elbow (1). End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, "Reconditioning Procedures 3114 and 3116 Engines".
Ensure that all of the parts of the engine oil pump are thoroughly clean prior to assembly. Note: Lubricate all internal parts of the engine oil pump with clean engine oil.
Illustration 1 g00824021
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install oil pressure relief plunger (13) and spring (14) in oil pump body assembly (7). Install the washer and the bolt.
Illustration 2 g00614694
Illustration 3 g00614689
Install shaft assembly (12) in oil pump body (9).
Install shaft assembly (11) in oil pump body (9).
Position oil pump body (9) on oil pump body assembly (7) and install bolts (10).
Illustration 4 g00614683
Press drive gear (8) on shaft assembly (11) until drive gear (8) is flush with the end of shaft assembly (11).
Install oil pump shaft (6). Install the bearing in idler gear (5) with Tooling (A). Install the bearing so the distance between the hub bolt face of idler gear (5) and the bearing is 0.75 0.25 mm (0.030 0.010 inch).
Illustration 5 g00614677
Install idler gear (5) on oil pump shaft (6). Install washer (4) and bolt (3). Tighten bolt (3) to 70 15 N m (52 11 lb ft).
Illustration 6 g00614664
Check the condition of the gasket that is used in tube assembly for the pickup of oil (2). If the gasket is damaged, replace the gasket. Install the gasket and tube assembly for the pickup of oil (2).
Check the condition of the O-ring seal that is used in outlet elbow (1). If the O-ring seal is damaged, replace the O-ring seal. Install the O-ring seal and outlet elbow (1). End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Cat SIS web machinery list:
Parts flange Caterpillar catalog:
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD, 2290, 2384C, 2390, 2391, 2484C, 2491, 256C, 2590, 262C, 267, 267B, 272C, 277C, 2864C...
16, 173B, 225, 227, 235, 235B, 2384C, 245, 245B, 245D, 2484C, 24M, 365B, 365B II, 365C L MH, 385C L MH, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424B, 424B HD, 424D, 428D, 428E, 428F, 430...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
1090, 115, 1190, 1190T, 1290T, 1390, 16G, 215, 215B, 215D, 219D, 225, 225D, 227, 229, 2290, 229D, 231D, 235, 235B, 235C, 235D, 2390, 2391, 245, 245B, 245D, 2491, 2590, 2670C, 2864C, 312, 312B L, 312C,...
10S, 120, 120B, 12F, 140, 140B, 141, 14E, 14G, 153, 16, 163, 16G, 173B, 183B, 191, 193, 215, 215B, 225, 235, 245, 2470C, 2570C, 2670C, 30/30, 307B, 308C, 311B, 312, 312B, 312B L, 312C, 312C L, 313B, 3...
1390, 2470C, 2570C, 2590, 2670C, 2864C, 30/30, 533, 541, 541 2, 543, 551, 552, 552 2, 553C, 563C, 573C, 574, 586C, 924K, 930K, 938K, 988K, AP-1055D, AP-600D, AP-655C, AP-655D, AP1000E, AP1055E, AP555E...
215, 215B, 215C, 215D, 219D, 2470C, 2570C, 2670C, 312, 312C, 315B L, 315C, 317B LN, 318B, 318C, 319C, 319D, 319D LN, 320 L, 320B, 320C, 320D, 320D FM, 320N, 321C, 322 FM L, 322B L, 322B LN, 322C, 322C...
120H, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14G, 14M, 160H, 160H ES, 160H NA, 163H NA, 16G, 24H, 320B, 322B L, 322B LN, 325B L, 330 L, 330B L, 345B II, 345B L, 5110B, 5130, 5130B, 5230, 5...
225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 2864C, 312D2, 324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2...
173B, 183B, 193, 235, 235B, 235D, 2384C, 245, 2484C, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 5110B, 5130, 559C, 578, 579C, 583R, 583T, 584, 587R, 587T, 589, 611, 613C, 613C II, 61...
245, 245B, 245D, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5080, 5090B, 615, 615C, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793D, 793F, 793F CMD, 793F OE...
5110B, 623E, 623F, S305, S365B, S365C, VHS-50, VHS-60/3, VHS-60/4
1903112
FLANGE
993K
993K
2526495
FLANGE AS
993K
993K
2741422
FLANGE
993K
993K
1833241
FLANGE
5110B, 854G, 854K, 992G, 992K
5110B, 854G, 854K, 992G, 992K
3413332
FLANGE
994F, 994H
994F, 994H
2584469
FLANGE
990H
990H
5P5057
FLANGE-CAPTIVE
980K, 980K HLG
980K, 980K HLG
3781150
FLANGE
824K, 825K, 826K, 950K, 962K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980K, 980K HLG, 980M, 982M
824K, 825K, 826K, 950K, 962K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 980K, 980K HLG, 980M, 982M
4471484
FLANGE
950K, 962K
950K, 962K
1383416
FLANGE
966H, BA30
966H, BA30
2626143
FLANGE
993K
993K