FRAME A 0876438 - Caterpillar

Removal Procedure
Start By:
Remove the canopy, if equipped.
Open the side access door.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g06259900
Remove the bolt, the washers, and disconnect ground strap (3) from power inverter (1).
Remove three bolts (2) and the three washers.
Illustration 2 g03703553
Remove four bolts (4) and plate assembly (5).
Illustration 3 g06259906
Remove two bolts (6), the plate, and the clamps.
Illustration 4 g03703558
Loosen the screw and disconnect harness assembly (7) from harness assembly (9).
Cut cable strap (10).
Remove two screws (8) and separate harness assembly (9) from the plate assembly.
Illustration 5 g03703571
Attach a suitable lifting device to operator platform (11). The weight of operator platform (11) is approximately 181 kg (400 lb).
Illustration 6 g03707089
Remove two bolts (12), the two washers, the plate, the shims, the bearing flange, and operator platform (11).Installation Procedure
Install operator platform (11) in the reverse order of removal.