GAUGE GP-SIGHT 7Y2398 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Drain the oil from the engine oil pan into a suitable container for storage or disposal.
Illustration 1 g00625200
Remove bolts (1) that fasten the engine oil pan (2) to the cylinder block.
Remove engine oil pan (2) .
Illustration 2 g00625216
Remove seal (3) for oil pan from the cylinder block.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00625216
Clean the sealing surface of the engine oil pan, cylinder block, housing (front), and the flywheel housing. Install seal (3) on the cylinder block.
Illustration 4 g00625287
Position engine oil pan (2) and install bolts (1) . Tighten bolts (1) to a torque of 47 9 N m (35 5 lb ft).
Tighten drain plugs (4) to a torque of 70 10 N m (50 7 lb ft).
Fill the engine to the correct level with oil. Refer to Operation and Maintenance Manual.