4I7467 GEAR-RING Caterpillar parts
322 FM L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 34...
Rating:
Alternative (cross code) number:
CA4I7467
4I-7467
4I7467
CA4I7467
4I-7467
4I7467
Weight: 83 pounds 37 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$791.48
23 Sep 2021
87.4[39.33] Pounds
US: IronDT
CTP Caterpillar Gear Ring (4i7467)
CTP
CTP
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 4I7467:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-5518 Bearing Tool 1 Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Check the main bearing caps for identification of the location and check the direction of the main bearing caps in relation to the cylinder block. The main bearing caps must be installed in the original location and the original direction.
Illustration 1 g01149949
Remove bolts (1) and bolts (3) from No. 2 through No. 6 main bearing caps (2). Note: Remove No. 1 and No. 7 main bearing caps (2) after No. 2 through No. 6 main bearing caps have been installed.
Illustration 2 g01149952
Install Tooling (A) in the oil hole of the crankshaft. Carefully rotate the crankshaft in order to remove upper main bearing (4) from the cylinder block. Note: Push the upper main bearing from the opposite side of the bearing tab with Tooling (A). If the crankshaft is turned in the wrong direction, the tab on the bearing will be pushed between the crankshaft and the bearing area of the cylinder block. This can result in damage to the cylinder block and/or the crankshaft.
Remove the thrust plates from each side of the No. 4 main bearing.
Remove the lower halves of the main bearings from the main bearing caps.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-5518 Bearing Tool 1 Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Check the main bearing caps for identification of the location and check the direction of the main bearing caps in relation to the cylinder block. The main bearing caps must be installed in the original location and the original direction.
Illustration 1 g01149949
Remove bolts (1) and bolts (3) from No. 2 through No. 6 main bearing caps (2). Note: Remove No. 1 and No. 7 main bearing caps (2) after No. 2 through No. 6 main bearing caps have been installed.
Illustration 2 g01149952
Install Tooling (A) in the oil hole of the crankshaft. Carefully rotate the crankshaft in order to remove upper main bearing (4) from the cylinder block. Note: Push the upper main bearing from the opposite side of the bearing tab with Tooling (A). If the crankshaft is turned in the wrong direction, the tab on the bearing will be pushed between the crankshaft and the bearing area of the cylinder block. This can result in damage to the cylinder block and/or the crankshaft.
Remove the thrust plates from each side of the No. 4 main bearing.
Remove the lower halves of the main bearings from the main bearing caps.
Cat SIS web machinery list:
Parts gear Caterpillar catalog:
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, 511, 521, 522, 532, TK1051, W345B II
325, 325 L, 325 LN, OEMS
325, 325 LN, OEMS
325, 325 LN, OEMS
325, 325 LN, OEMS
325, 325 LN, OEMS
325, 325 LN, OEMS
320 L, 345B, 345B L, OEMS
330, 330 FM L, 330 L, 330C, 330D L, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, OEMS
330C, 345B, 345B II, 345B II MH, 345B L, 350, OEMS
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325...
322 FM L, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 34...
3333044
GEAR & BEARING GP
349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL
349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL
1930336
GEAR-PLANETARY
325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL
325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL
1930333
GEAR
325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL
325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL
1850773
GEAR-PLANETARY
1190, 1190T, 1390, 2390, 2391, 2590, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 521, 521B, 522, 522B, 541, 541 2, 568 FM LL, TK1051, TK721, TK741
1190, 1190T, 1390, 2390, 2391, 2590, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 521, 521B, 522, 522B, 541, 541 2, 568 FM LL, TK1051, TK721, TK741
2942656
GEAR-TRANSFER
AD55B, AD60
AD55B, AD60
3909132
GEAR-PINION
325D FM, 330D FM, 568 FM LL, GLL60
325D FM, 330D FM, 568 FM LL, GLL60
3421879
GEAR-DRIVEN
336E, 336E HVG, 336E L, 336E LN, 568 FM LL
336E, 336E HVG, 336E L, 336E LN, 568 FM LL
2959508
GEAR-DRIVE
336E, 336E HVG, 336E L, 336E LN, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL
336E, 336E HVG, 336E L, 336E LN, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL
1695535
GEAR-SUN
330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL, W345B II, W345C MH
330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL, W345B II, W345C MH
322 FM L, 322B L, 322B LN, 325B, 325B L, 330D FM, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 568 FM LL, M32...