2301613 HARNESS AS-CONSOLE Caterpillar parts
345B II
Rating:
Alternative (cross code) number:
CA2301613
230-1613
2301613
CA2301613
230-1613
2301613
Weight: 2 pounds 1 kg.
EXCAVATOR,
Compatible equipment models: 2301613:
Information:
Which Generate This Code:The ECM detects all of the following conditions:
A short to ground condition is present between the ECM and the air inlet heater relay for at least two seconds.
The ECM has been powered for at least one second.
The engine is not being cranked.
Battery voltage is greater than 9 VDC for at least two seconds prior to the open circuit.System Response:The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on Caterpillar Electronic Technician (Cat ET). The air inlet heater is disabled.
Hard startingThe machine is not equipped with the hardware that is required for this feature. The "Air Inlet Heater Installation Status" parameter has been inadvertently changed to "Enabled".Test Step 1. Change the "Air Inlet Heater Installation Status" Parameter to "Disabled"
Connect Cat ET to the service tool connector.
Change the parameter for "Air Inlet Heater Installation Status" to "Disabled".
Clear any logged diagnostic codes that are related to the air inlet heater.
Verify that the repair eliminates the problem.Results:
OK - STOP
A short to ground condition is present between the ECM and the air inlet heater relay for at least two seconds.
The ECM has been powered for at least one second.
The engine is not being cranked.
Battery voltage is greater than 9 VDC for at least two seconds prior to the open circuit.System Response:The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on Caterpillar Electronic Technician (Cat ET). The air inlet heater is disabled.
Hard startingThe machine is not equipped with the hardware that is required for this feature. The "Air Inlet Heater Installation Status" parameter has been inadvertently changed to "Enabled".Test Step 1. Change the "Air Inlet Heater Installation Status" Parameter to "Disabled"
Connect Cat ET to the service tool connector.
Change the parameter for "Air Inlet Heater Installation Status" to "Disabled".
Clear any logged diagnostic codes that are related to the air inlet heater.
Verify that the repair eliminates the problem.Results:
OK - STOP
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
1433422
HARNESS AS
311B, 320B, 325B L, 330B L, 345B II, 345B L
311B, 320B, 325B L, 330B L, 345B II, 345B L
1548149
HARNESS AS
320B, 322B LN, 325B L, 330B L, 345B II, 345B L
320B, 322B LN, 325B L, 330B L, 345B II, 345B L
1457213
HARNESS AS
320B, 322B LN, 325B L, 330B L, 345B II, 345B L
320B, 322B LN, 325B L, 330B L, 345B II, 345B L
1475052
HARNESS AS
320B, 325B L, 330B L, 345B II, 345B L
320B, 325B L, 330B L, 345B II, 345B L
1785369
HARNESS AS
320B, 325B L, 330B L, 345B II, 345B L
320B, 325B L, 330B L, 345B II, 345B L
1456816
HARNESS AS-SWITCH
345B II, 345B L
345B II, 345B L
1445432
HARNESS AS-POWER
345B II, 345B L
345B II, 345B L
1991249
HARNESS AS
345B II
345B II
1441179
HARNESS AS-SWITCH
345B II
345B II
2372192
HARNESS AS
345B II
345B II
2117971
HARNESS AS-CAB
345B II
345B II
2323011
HARNESS AS-LIGHTING
325D L, 330D L, 345B II, 345C L
325D L, 330D L, 345B II, 345C L
1999638
HARNESS AS
345B II
345B II
2289315
HARNESS AS-PANEL
345B II
345B II
2196674
HARNESS AS-PLATFORM
345B II
345B II
2196678
HARNESS AS-BOX
345B II
345B II
2117971
HARNESS AS-CAB
345B II
345B II
2372192
HARNESS AS
345B II
345B II
2245056
HARNESS AS-PANEL
345B II
345B II
2596660
HARNESS AS-SENSOR
345B II
345B II
2462590
HARNESS AS-WIRING
345B II
345B II
2457417
HARNESS AS
345B II
345B II
2184697
HARNESS AS-CONSOLE
345B II
345B II
2140443
HARNESS AS
345B II
345B II