AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6E-0019 CYLINDER GP-STICK 220MM (8.66IN) BORE X 2262MM (89.06IN) STROKE PART OF 7Y-5193 CYLINDER & SEAL GP-STICK AN ATTACHMENT 375-A


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-BOOM

EXCAVATOR 375-A EXCAVATOR 6NK
 375 & 375 L Excavator Custom Attachments 6NK00001-UP (MACHINE) POWERED BY 3406 Engine HEBP0837 375-A 6NK   (1991)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-BOOM
114-0595 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-STICK
7Y-5193 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
7Y-5193 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
7Y-5193 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
114-0596 CYLINDER GP-BOOM
CYLINDER GP-STICK
6E-0019 CYLINDER GP-STICK
CYLINDER GP-STICK
156-0664 CYLINDER GP-STICK
CYLINDER GP-STICK
156-0679 CYLINDER GP-STICK
 

#HEBP08370040
 

6E-0019: CYLINDER GP-STICK

6E-0019 CYLINDER GP-STICK
220MM (8.66IN) BORE X 2262MM (89.06IN) STROKE
PART OF 7Y-5193 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i00395820 HEBP0837
6E0019 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-0488 [1] CYLINDER AS  
  6E-0781 [1] BEARING-SLEEVE  
2. 4I-6329 [1] NUT  
3. 7I-8122 [1] STOP  
4. 116-3516 M [1] LOCKNUT  
5. 6E-0496 J [1] RING-WEAR  
6. 8C-9182 J [1] SEAL AS  
7. 116-3517 [1] PISTON  
8. 116-3518 [1] STOP  
9. 095-1733 J [1] SEAL-O-RING  
10. 4I-6442 J [1] RING-BACKUP  
11. 128-9262 [1] BEARING-SLEEVE  
12. 103-8361 [1] HEAD  
13. 8T-4167 [12] WASHER (4.0MM THK)  
14. 7X-2454 M [12] BOLT (M24X3.0X110MM)  
15. 142-5151 [1] ROD AS  
  6E-0781 [1] BEARING-SLEEVE  
16. 165-9296 J [1] SEAL-LIP TYPE  
17. 8C-9191 J [1] SEAL-U-CUP  
18. 8C-9193 J [1] SEAL-BUFFER  
19. 8C-9192 J [1] RING-BACKUP  
20. 4I-6443 J [1] RING  
21. 116-3519 J [1] RING-SEAL  
22. 095-1274 M [1] SETSCREW-SOCKET  
23. 103-8364 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  156-0627 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PARTS MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP08370041
 

156-0664: CYLINDER GP-STICK

156-0664 CYLINDER GP-STICK
S/N 9WL1-UP
PART OF 7Y-5193 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i01212804 HEBP0837
1560664 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-0665 [1] CYLINDER AS  
1A. 6E-0781 [1] BEARING-SLEEVE  
2. 4I-6329 [1] NUT  
3. 7I-8122 [1] STOP  
4. 116-3516 M [1] LOCKNUT  
5. 6E-0496 J [1] RING-WEAR  
6. 8C-9182 J [1] SEAL AS  
7. 116-3517 [1] PISTON  
8. 116-3518 [1] STOP  
9. 095-1733 J [1] SEAL-O-RING  
10. 4I-6442 J [1] RING-BACKUP  
11. 128-9262 [1] BEARING-SLEEVE  
12. 173-3366 [1] HEAD  
13. 9X-8258 [12] WASHER (6MM THK)  
14. 9X-6618 M [12] BOLT (M30X130MM)  
15. 142-5151 [1] ROD AS  
15A. 6E-0781 [1] BEARING-SLEEVE  
16. 165-9296 J [1] SEAL-LIP TYPE  
17. 8C-9191 J [1] SEAL-U-CUP  
18. 8C-9192 J [1] RING-BACKUP  
19. 8C-9193 J [1] SEAL-BUFFER  
20. 4I-6443 J [1] RING  
21. 116-3519 J [1] RING-SEAL  
22. 095-1274 M [1] SETSCREW-SOCKET  
23. 103-8364 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  156-0627 J [1] KIT-SEAL  
  J   KIT(S) MARKED J INCLUDES PARTS MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  M   METRIC PART
 

#HEBP08370042
 

156-0679: CYLINDER GP-STICK

156-0679 CYLINDER GP-STICK
PART OF 7Y-5193 CYLINDER & SEAL GP-STICK
ALSO AN ATTACHMENT
i01248983 HEBP0837
1560679 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-0665 [1] CYLINDER AS  
1A. 6E-0781 [1] BEARING-SLEEVE  
2. 4I-6329 [1] NUT  
3. 7I-8122 [1] STOP  
4. 116-3516 M [1] LOCKNUT  
5. 6E-0496 J [1] RING-WEAR  
6. 8C-9182 J [1] SEAL AS  
7. 116-3517 [1] PISTON  
8. 116-3518 [1] STOP  
9. 095-1733 J [1] SEAL-O-RING  
10. 4I-6442 J [1] RING-BACKUP  
11. 128-9262 [1] BEARING-SLEEVE  
12. 173-3366 [1] HEAD  
13. 9X-8258 [12] WASHER (6MM THK)  
14. 9X-6618 M [12] BOLT (M30X130MM)  
15. 156-0680 [1] ROD AS  
15A. 6E-0781 [1] BEARING-SLEEVE  
16. 165-9296 J [1] SEAL-LIP TYPE  
17. 8C-9191 J [1] SEAL-U-CUP  
18. 8C-9193 J [1] SEAL-BUFFER  
19. 8C-9192 J [1] RING-BACKUP  
20. 4I-6443 J [1] RING  
21. 116-3519 J [1] RING-SEAL  
22. 095-1274 M [1] SETSCREW-SOCKET  
23. 103-8364 [1] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  156-0627 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDED PARTS MARKED J
  M   METRIC PART
 

#HEBP08370043
 

173-9215: HYDRAULIC AR

173-9215 HYDRAULIC AR
PART OF 162-9382 SPECIAL AR-MATERIAL HANDLER
i01286216 HEBP0837
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-0405 Y [1] HOOD GP-ENGINE  
  141-0929 [1] LINES GP-FRONT  
  142-0417 [1] LINES GP-FRONT  
  113-0403 Y [1] LINES GP-PILOT  
  142-2690 [1] LINES GP-PILOT  
  143-0341 Y [1] LINES GP-PILOT  
  142-0416 [1] LINES GP-PUMP  
  141-3894 Y [1] LINES GP-RETURN  
  141-3962 [1] LINES GP-RETURN  
  113-0404 Y [1] WIRING GP-AUXILIARY CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#HEBP08370044
 

4Q-4417: LINES GP-BOOM

4Q-4417 LINES GP-BOOM
S/N 9WL1-UP
AN ATTACHMENT
i00708902 HEBP0837
4Q4417 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2476 [2] HOSE AS  
2. 7K-1181 B [20] STRAP-CABLE (4IN DIA)  
3. 117-8461 [1] BRACKET  
4. 117-8704 [1] PLATE  
5. 103-1303 [6] CLAMP-HALF  
6. 8T-4193 M [6] BOLT (M16X2.0X50MM)  
7. 8T-4132 M [6] NUT (M16X2.0 THD)  
8. 9X-8257 [12] WASHER (3.50MM THK)  
9. 6V-8995 [4] UNION-BULKHEAD (13/16-16 THD)  
10. 6V-9169 [4] NUT-BULKHEAD (13/16-16 THD)  
11. 6V-8398 [8] SEAL-O-RING (12.47MM ID)  
12. 117-8460 [2] BRACKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#HEBP08370045
 

117-1209: LINES GP-BOOM

117-1209 LINES GP-BOOM
PART OF 4Q-4286 BOOM AR-STRAIGHT
AN ATTACHMENT
i00708911 HEBP0837
1171209 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-8478 [1] BLOCK  
2. 1P-3706 [5] SEAL (57.9MM OD)  
3. 9S-4181 [1] PLUG-STRAIGHT THREAD (1-5/16-12 THD)  
4. 7M-8485 [2] SEAL-O-RING (29.74MM ID)  
5. 7Y-1905 M [4] BOLT-SOCKET HEAD (M16X2X60MM)(LOCKING)  
6. 6V-8724 [2] ELBOW (9/16-18 THD)  
7. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
8. 6V-8397 [14] SEAL-O-RING (9.27MM ID)  
9. 4J-0520 [1] SEAL-O-RING (32.92MM ID)  
10. 8T-5412 M [4] BOLT (M12X1.75X140MM)  
11. 1P-3704 [2] SEAL-RECTANGULAR (38.2MM ID)  
12. 8T-4956 M [4] BOLT (M12X1.75X35MM)  
13. 6V-9008 [1] ELBOW-90 DEGREE (1 5/16-12 THD)  
14. 5K-9090 [7] SEAL-O-RING (23.52MM ID)  
15. 116-3439 Y [1] VALVE GP-CHECK & RELIEF  
16. 118-7731 [2] SUPPORT AS  
17. 7Y-4038 [4] CLAMP-HALF  
18. 8T-4139 M [4] BOLT (M12X1.75X30MM)  
19. 8T-4223 [8] WASHER-HARD (3MM THK)  
20. 118-7131 [1] TUBE AS  
21. 6C-6377 I [1] HOSE AS  
22. 9U-3354 I [4] HOSE AS  
23. 118-8264 [1] PLATE  
24. 6V-8994 [6] UNION-BULKHEAD (11/16-16 THD)  
25. 6V-9168 [6] NUT (11/16-16 THD)  
26. 6V-8998 [3] UNION-FACE SEAL  
27. 6V-9172 [3] NUT (1 7/16-12 THD)  
28. 1P-5767 [2] FLANGE-HALF  
29. 8T-4194 M [2] BOLT (M12X1.75X50MM)  
30. 6C-6540 I [2] HOSE AS  
31. 6C-6541 I [1] HOSE AS  
32. 118-7200 I [1] HOSE AS  
33. 118-8263 [2] PLATE  
34. 8T-4140 M [20] BOLT (M16X2.0X60MM)  
35. 118-8944 I [1] HOSE AS  
36. 7K-1181 B [16] STRAP-CABLE (4IN DIA)  
37. 8T-4910 M [2] BOLT (M12X1.75X60MM)  
38. 6H-3615 [5] PLUG-PROTECTION  
39. 7X-2554 M [4] BOLT (M16X2X70MM)  
40. 9X-8257 [78] WASHER (3.50MM THK)  
41. 9F-2167 [5] SCREW-PURGE  
42. 103-1311 [2] SUPPORT AS  
43. 8T-4193 M [24] BOLT (M16X2.0X50MM)  
44. 6W-3731 [8] SPACER  
45. 1P-3705 [5] SEAL-RECTANGULAR (44.7MM ID)  
46. 103-1303 [46] CLAMP-HALF  
47. 7X-2553 M [46] BOLT (M16X2.0X40MM)  
48. 118-7122 [2] TUBE AS  
49. 118-7121 [3] TUBE AS  
50. 5P-8077 [10] FLANGE-HALF  
51. 118-7125 [2] TUBE AS  
52. 7Y-4184 I [2] HOSE AS  
53. 118-7127 [1] TUBE AS  
54. 118-7128 [1] TUBE AS  
  B   USE AS REQUIRED
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#HEBP08370046
 

118-6421: LINES GP-BOOM

118-6421 LINES GP-BOOM
PART OF 4Q-4286 BOOM AR-STRAIGHT
AN ATTACHMENT
i00708912 HEBP0837
1186421 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2555 M [20] BOLT (M16X2.0X80MM)  
2. 8T-4193 M [20] BOLT (M16X2.0X50MM)  
3. 7X-2553 M [4] BOLT (M16X2.0X40MM)  
4. 7X-2559 M [8] BOLT (M16X2.0X160MM)  
5. 8T-4140 M [16] BOLT (M16X2.0X60MM)  
6. 9X-8257 [48] WASHER (3.50MM THK)  
7. 118-7123 [1] TUBE AS  
8. 118-7124 [1] TUBE AS  
9. 118-7130 [1] TUBE AS  
10. 118-7129 [1] TUBE AS  
11. 118-7126 [2] TUBE AS  
12. 114-3415 [1] PLATE  
13. 114-0792 [1] PLATE  
14. 111-1242 [2] BLOCK  
15. 103-1303 [32] CLAMP-HALF  
16. 1P-3706 [4] SEAL (57.9MM OD)  
17. 5P-8077 [8] FLANGE-HALF  
18. 1P-3705 [4] SEAL-RECTANGULAR (44.7MM ID)  
19. 117-8704 [4] PLATE  
20. 114-0228 I [1] HOSE AS  
21. 114-0229 I [1] HOSE AS  
22. 114-0793 [10] SPACER  
23. 8T-4132 M [4] NUT (M16X2.0 THD)  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#HEBP08370047
 

118-6422: LINES GP-BOOM

118-6422 LINES GP-BOOM
PART OF 4Q-4286 BOOM AR-STRAIGHT
AN ATTACHMENT
i00708913 HEBP0837
1186422 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 B [20] STRAP-CABLE (4IN DIA)  
2. 118-8943 I [2] HOSE AS  
3. 117-8461 [1] BRACKET  
4. 117-8704 [1] PLATE  
5. 103-1303 [2] CLAMP-HALF  
6. 8T-4193 M [2] BOLT (M16X2.0X50MM)  
7. 8T-4132 M [2] NUT (M16X2.0 THD)  
8. 9X-8257 [4] WASHER (3.50MM THK)  
9. 6V-8995 [4] UNION-BULKHEAD (13/16-16 THD)  
10. 6V-9169 [4] NUT-BULKHEAD (13/16-16 THD)  
11. 6V-8398 [8] SEAL-O-RING (12.47MM ID)  
12. 117-8460 [2] BRACKET  
  B   USE AS REQUIRED
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#HEBP08370048
 

128-2703: LINES GP-BOOM

128-2703 LINES GP-BOOM
S/N 9WL1-UP
PART OF 127-8023 BOOM AR
AN ATTACHMENT
i00708918 HEBP0837
1282703 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-3354 [5] TUBE AS  
2. 1P-3706 [10] SEAL (57.9MM OD)  
3. 128-3356 [1] TUBE AS  
4. 128-3357 [1] TUBE AS  
5. 128-3355 [3] TUBE AS  
6. 128-3358 [2] TUBE AS  
7. 128-3359 [1] TUBE AS  
8. 128-3360 [1] TUBE AS  
9. 7Y-4185 I [1] HOSE AS  
10. 104-8762 [2] SUPPORT AS  
11. 8T-4140 M [24] BOLT (M16X2.0X60MM)  
12. 6H-3615 [5] PLUG-PROTECTION  
13. 9X-8257 [106] WASHER (3.50MM THK)  
14. 9F-2167 [5] SCREW-PURGE  
15. 103-1311 [2] SUPPORT AS  
16. 8T-4193 M [56] BOLT (M16X2.0X50MM)  
17. 6W-3731 [8] SPACER  
18. 1P-3705 [8] SEAL-RECTANGULAR (44.7MM ID)  
19. 103-1303 [74] CLAMP-HALF  
20. 7X-2553 M [70] BOLT (M16X2.0X40MM)  
21. 5P-8077 [16] FLANGE-HALF  
22. 7Y-4184 I [2] HOSE AS  
23. 7Y-5187 [1] TUBE AS  
24. 7X-2556 M [4] BOLT (M16X2.0X100MM)  
25. [2] PLATE  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#HEBP08370049
 

128-5812: LINES GP-BOOM

128-5812 LINES GP-BOOM
S/N 9WL1-UP
PART OF 4Q-4431 VALVE & LINES AR
AN ATTACHMENT
i00708924 HEBP0837
1285812 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 375-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-8478 [1] BLOCK  
2. 1P-3706 [1] SEAL (57.9MM OD)  
3. 9S-4181 [1] PLUG-STRAIGHT THREAD (1-5/16-12 THD)  
4. 7M-8485 [2] SEAL-O-RING (29.74MM ID)  
5. 7Y-1905 M [4] BOLT-SOCKET HEAD (M16X2X60MM)(LOCKING)  
6. 6V-8724 [2] ELBOW (9/16-18 THD)  
7. 3J-1907 [2] SEAL-O-RING (11.89MM ID)  
8. 6V-8397 [14] SEAL-O-RING (9.27MM ID)  
9. 4J-0520 [1] SEAL-O-RING (32.92MM ID)  
10. 8T-5412 M [4] BOLT (M12X1.75X140MM)  
11. 1P-3704 [2] SEAL-RECTANGULAR (38.2MM ID)  
12. 8T-4956 M [4] BOLT (M12X1.75X35MM)  
13. 6V-9008 [1] ELBOW-90 DEGREE (1 5/16-12 THD)  
14. 5K-9090 [7] SEAL-O-RING (23.52MM ID)  
15. 116-3439 Y [1] VALVE GP-CHECK & RELIEF  
16. 118-7731 [2] SUPPORT AS  
17. 7Y-4038 [4] CLAMP-HALF  
18. 8T-4139 M [4] BOLT (M12X1.75X30MM)  
19. 8T-4223 [8] WASHER-HARD (3MM THK)  
20. 118-7131 [1] TUBE AS  
21. 6C-6377 I [1] HOSE AS  
22. 9U-3354 I [2] HOSE AS  
23. 118-8264 [1] PLATE  
24. 6V-8994 [6] UNION-BULKHEAD (11/16-16 THD)  
25. 6V-9168 [6] NUT (11/16-16 THD)  
26. 6V-8998 [3] UNION-FACE SEAL  
27. 6V-9172 [3] NUT (1 7/16-12 THD)  
28. 1P-5767 [2] FLANGE-HALF  
29. 8T-4194 M [2] BOLT (M12X1.75X50MM)  
30. 6C-6540 I [2] HOSE AS  
31. 6C-6541 I [1] HOSE AS  
32. 118-7200 I [1] HOSE AS  
33. 118-8263 [2] PLATE  
34. 4I-1634 I [2] HOSE AS  
35. 6C-6311 I [1] HOSE AS  
36. 7K-1181 B [16] STRAP-CABLE (4IN DIA)  
37. 8T-4910 M [2] BOLT (M12X1.75X60MM)  
38. 8T-4140 M [4] BOLT (M16X2.0X60MM)  
39. 7X-2554 M [4] BOLT (M16X2X70MM)  
40. 9X-8257 [8] WASHER (3.50MM THK)  
41. 5P-8077 [4] FLANGE-HALF  
  B   USE AS REQUIRED
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-CSARL
Product Support Program For The Rework Of Implement Cylinder Rods On Certain 375, 375L And 5080 Excavators
Product Support Program For The Rework Of Implement Cylinder Rods On Certain 375, 375L And 5080 Excavators
Technical Information Bulletin
Starting Of Hydraulics On Excavators
Starting Of Hydraulics On Excavators
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Bucket Hydraulic Cylinder<BR> 4I0908
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Bucket Hydraulic Cylinder<BR> 7y5190
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Bucket Hydraulic Cylinder<BR> 7Y5194
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Bucket Hydraulic Cylinder<BR> 1057484
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Boom Hydraulic Cylinder<BR> 4I5707
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Boom Hydraulic Cylinder<BR> 7Y5191
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Boom Hydraulic Cylinder<BR> 1140595
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Stick Hydraulic Cylinder<BR> 4I7735
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Stick Hydraulic Cylinder<BR> 7Y5193
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Master Hydraulic Cylinder<BR> 4I5692
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Bottom Dump Hydraulic Cylinder<BR> 1211512
375, 375L EXCAVATORS AND 5080 FRONT SHOVEL ATTACHMENTS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder
375 EXCAVATOR MACHINE SYSTEMS
Stick Cylinder
375 EXCAVATOR MACHINE SYSTEMS
Boom Cylinders
375 EXCAVATOR MACHINE SYSTEMS
Counterweight Lift Cylinders
375 EXCAVATOR MACHINE SYSTEMS
Service Magazine
Improvements To Stick, Boom, And Bucket Cylinders Are Identified{5456,5457,5458}
1995/09/25
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
New Balancing Hose Extends The Service Life Of Boom Lowering Control Valves {5057,5067,5456}
1999/09/13
New Parts For The Stick Cylinder Increase Service Life {5458}
2000/01/17
An Improved Dust Seal for Hydraulic Cylinders Increases the Service Life {5456, 5457, 5458, 7555, 7555}
2000/07/10
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
New High Temperature Buffer Seals Reduce Oil Leakage From Hydraulic Cylinders {7562}
2002/05/06
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
The Hydraulic Cylinders for the Stick and the Bucket Are Improved {5457, 5458}
2004/03/22
The Hydraulic Cylinders for the Stick and the Bucket Are Improved {5457, 5458}
2004/11/08
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 375-A :

CYLINDER GP-BOOM
114-0596 CYLINDER GP-BOOM
CYLINDER & SEAL GP-STICK
7Y-5193 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
7Y-5193 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
7Y-5193 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BOOM
114-0595 CYLINDER & SEAL GP-BOOM
CONTROL GP-AUXILIARY PEDAL
109-6031 CONTROL GP-AUXILIARY PEDAL
4Q-4285 CONTROL AR-TRAVEL
4Q-4294 CONTROL AR-AUXILIARY
CYLINDER GP-STICK
156-0664 CYLINDER GP-STICK
CYLINDER GP-STICK
156-0679 CYLINDER GP-STICK
173-9215 HYDRAULIC AR
LINES GP-BOOM
4Q-4417 LINES GP-BOOM
LINES GP-BOOM
117-1209 LINES GP-BOOM
LINES GP-BOOM
118-6421 LINES GP-BOOM
LINES GP-BOOM
118-6422 LINES GP-BOOM
LINES GP-BOOM
128-2703 LINES GP-BOOM
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.