HOSE AS 4Z8207 - Caterpillar

Procedure under normal conditions
Park the machine on a level surface and engage the parking brake.
Illustration 1 g03485857Hood control switch (1) is located inside the cab on the left side of the dash panel.
Raising the hood - Hold the top half of the hood control switch in the depressed position in order to raise the hood. Release the hood control switch when the hood is in the fully raised position. Note: A repetitive clicking noise will sound when the hood has reached the fully raised position.
Lowering the hood - Hold the bottom half of the hood control switch in the depressed position in order to lower the hood. Release the hood control switch when the hood is in the fully lowered position.Note: A repetitive clicking noise will sound when the hood has reached the fully lowered position. Do not release the hood control switch until the hood is fully lowered.Procedure without power
Illustration 2 g03819800
Remove 2 bolts (1).
Open access door (2) for lights.
Access the breaker box (3). Replace fuse.
Inspect hood actuator (4) for damage.
Open hood. Refer to Operation and Maintenance Manual, "Hood Control (Procedure under normal conditions)".