AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

115-1056 SENSOR GP-SONIC S/N 1JG1-UP AN ATTACHMENT AP-1050 ASPHALT PAVER


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
GRADE REFERENCES
LEVELER GP

ASPHALT PAVER AP-1050 ASPHALT PAVER 1JG
 AP-1050 Asphalt Paver 1JG00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0077 AP-1050 1JG   (1989)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-FEEDER
5E-9363 SENSOR GP-FEEDER
SENSOR GP-FEEDER
7R-5385 SENSOR GP-FEEDER
SENSOR GP-FEEDER
8I-0864 SENSOR GP-FEEDER
SENSOR GP-SONIC
115-1056 SENSOR GP-SONIC
 

#KEBP00770410
 

115-1056: SENSOR GP-SONIC

115-1056 SENSOR GP-SONIC
S/N 1JG1-UP
AN ATTACHMENT
i00489825 KEBP0077
1151056 SENSOR GP-SONIC Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6R-4365 [4] CLAMP AS  
2. 6R-4361 [2] BAR  
3. 107-9066 [2] SENSOR AS-SONIC (MAT'L FLOW)  
4. 107-9067 [2] CABLE  
5. 110-2124 [2] CLAMP  
6. 5C-5440 [8] LOCKNUT (1/4-20-THD)  
7. 1G-6811 [2] SHAFT  
8. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 8T-7008 [2] BOLT (3/8-16X3-IN)  
10. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
11. 6V-8801 [4] NUT (3/8-16-THD)  
12. 105-3225 [2] SUPPORT AS-SENSOR  
13. 112-6231 [1] HARNESS AS  
14. 112-6232 [1] HARNESS AS  
15. 113-0054 [2] CAP-DUST  
16. 121-0143 [2] WIRE AS  
17. 8C-8019 [1] RELAY (RH SCREED)  
18. 030-9612 [2] SCREW-FORMING (10-24X0.5-IN)  
19. 2Y-1020 [8] SCREW (1/4-20X0.75-IN)  
20. 110-0035 [2] PLATE-INSTRUCTION  
21. 8C-8019 [1] RELAY (LH SCREED)  
 

#KEBP00770411
 

109-5622: LEVELER GP

109-5622 LEVELER GP -40-FT GRADE REF, OUTBOARD
S/N 1JG1-UP
Type 1
AN ATTACHMENT
i00491220 KEBP0077
1095622 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 081-7770 [2] BEAM  
2. 081-9638 [4] CHANNEL  
3. 081-7209 [12] BRACKET  
4. 7X-0334 [8] BOLT (1/2-13X5-IN)  
5. 2H-3788 [8] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [44] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 [89] NUT (3/8-16-THD)  
8. 8T-4896 [64] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 081-7768 [2] BEAM-END  
10. 081-7769 [4] BEAM-END  
11. 6S-4975 [4] ROD  
12. 109-5639 [2] ANGLE  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 109-5642 [1] BRACKET AS  
15. 109-5648 [2] PLATE  
16. 109-5636 [1] BRACKET AS-GUIDE  
  8T-5912 [1] NUT-WELD (3/8-16-THD)  
17. 109-7799 [1] PIN AS  
  4B-5277 [1] WASHER (0.938X2.25X0.156-IN THK)  
18. 081-7524 [6] PIN-HITCH  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-7797 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 109-7805 [1] BAR  
25. 109-5661 [1] ROD END  
26. 109-5629 [8] SHOE AS  
27. 109-5632 [16] RUNNER  
28. 119-5915 [32] U-BOLT (1/4-20-THD)  
29. 6V-8185 [64] NUT (1/4-20-THD)  
30. 8T-4205 [64] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 2H-3725 [1] BOLT (3/4-16X1.5-IN)  
32. 8T-4994 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 9N-8909 [1] STRINGLINE  
34. 081-9637 [1] BEAM  
35. 109-5658 [2] SUPPORT AS-GUIDE  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
36. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
37. 6V-8188 [4] NUT (1/2-13-THD)  
38. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
39. 2B-9498 [2] NUT-WING (3/8-16-THD)  
40. 8T-9379 [24] BOLT (3/8-16X4.25-IN)  
41. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
 

#KEBP00770412
 

109-5622: LEVELER GP

109-5622 LEVELER GP -40-FT GRADE REF, OUTBOARD
S/N 1JG1-UP
Type 2
AN ATTACHMENT
i01141568 KEBP0077
1095622 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-9632 C [4] BEAM  
2. 081-9638 [4] CHANNEL  
3. 081-7209 [12] BRACKET  
4. 7X-0334 [12] BOLT (1/2-13X5-IN)  
5. 9X-0941 C [12] LOCKNUT (1/2-13-THD)  
6. 9B-7237 C [47] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 C [87] NUT (3/8-16-THD)  
8. 8T-4896 C [108] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 167-1311 C [2] PLATE AS  
10. 167-1314 C [4] PLATE AS  
11. 9R-2959 C [2] CLIP  
12. 170-7172 C [2] PLATE AS  
    (EACH INCLUDES)
  109-5639 [1] ANGLE  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 169-0173 C [1] PLATE AS  
15. 169-0171 C [4] PLATE  
16. 169-0174 C [1] PLATE AS  
  8T-5912 [1] NUT-WELD (3/8-16-THD)  
17. 109-7799 [1] PIN AS  
  4B-5277 [1] WASHER (0.938X2.25X0.156-IN THK)  
18. 172-5630 C [2] PIN AS  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-7797 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 109-7805 [1] BAR  
25. 167-4290 C [1] EYEBOLT (3/4-10-THD)  
26. 109-5629 [8] SHOE AS  
27. 109-5632 [16] RUNNER  
28. 119-5915 [32] U-BOLT (1/4-20-THD)  
29. 6V-8185 [64] NUT (1/4-20-THD)  
30. 8T-4205 [64] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 6V-8182 [2] NUT (3/4-10-THD)  
32. 8T-4994 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 110-8861 E CORD (915-CM)  
34. 170-7176 C [1] PLATE AS  
35. 109-5658 [2] SUPPORT AS-GUIDE  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
36. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
37. 6V-8188 [4] NUT (1/2-13-THD)  
38. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
39. 4L-6454 [1] BOLT (3/8-16X1-IN)  
40. 7X-0292 C [32] BOLT (3/8-16X4.5-IN)  
41. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
42. 7X-2554 BM [4] BOLT (M16X2X70-MM)  
43. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
44. 8T-4132 M [4] NUT (M16X2-THD)  
45. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
46. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
47. 8T-4193 BM [4] BOLT (M16X2X50-MM)  
48. 8T-4244 M [6] NUT (M12X1.75-THD)  
49. 106-4604 [1] TUBE  
50. 199-4198 [1] TUBE AS  
51. 293-1022 [2] MOUNT AS  
52. 432-2435 [2] MOUNT AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
53. 450-5685 [2] SUPPORT AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
54. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
55. 329-3356 M [4] NUT (M12X1.75-THD)  
56. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP00770413
 

109-5623: LEVELER GP

109-5623 LEVELER GP -30-FT GRADE REF, OUTBOARD
S/N 1JG1-UP
Type 1
AN ATTACHMENT
i00491223 KEBP0077
1095623 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 081-7770 [3] BEAM  
2. 081-9638 [4] CHANNEL  
3. 081-7209 [12] BRACKET  
4. 7X-0334 [8] BOLT (1/2-13X5-IN)  
5. 2H-3788 [8] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [44] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 [91] NUT (3/8-16-THD)  
8. 8T-4896 [64] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 081-7768 [2] BEAM-END  
10. 081-7769 [4] BEAM-END  
11. 6S-4975 [4] ROD  
12. 109-5639 [2] ANGLE  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 109-5642 [1] BRACKET AS  
15. 109-5648 [2] PLATE  
16. 109-5636 [1] BRACKET AS-GUIDE  
  8T-5912 [1] NUT-WELD (3/8-16-THD)  
17. 109-7799 [1] PIN AS  
  4B-5277 [1] WASHER (0.938X2.25X0.156-IN THK)  
18. 081-7524 [6] PIN-HITCH  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-7797 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 109-7805 [1] BAR  
25. 109-5661 [1] ROD END  
26. 109-5629 [8] SHOE AS  
27. 109-5632 [16] RUNNER  
28. 119-5915 [32] U-BOLT (1/4-20-THD)  
29. 6V-8185 [64] NUT (1/4-20-THD)  
30. 8T-4205 [64] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 2H-3725 [1] BOLT (3/4-16X1.5-IN)  
32. 8T-4994 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 9N-8909 [1] STRINGLINE  
34. 109-5658 [2] SUPPORT AS-GUIDE  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
35. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
36. 6V-8188 [4] NUT (1/2-13-THD)  
37. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
38. 8T-9379 [24] BOLT (3/8-16X4.25-IN)  
39. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
 

#KEBP00770414
 

109-5623: LEVELER GP

109-5623 LEVELER GP -30-FT GRADE REF, OUTBOARD
S/N 1JG1-UP
Type 2
AN ATTACHMENT
i01141592 KEBP0077
1095623 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-9632 C [3] BEAM  
2. 081-9638 [4] CHANNEL  
3. 081-7209 [12] BRACKET  
4. 7X-0334 [12] BOLT (1/2-13X5-IN)  
5. 9X-0941 C [12] LOCKNUT (1/2-13-THD)  
6. 9B-7237 C [47] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 C [79] NUT (3/8-16-THD)  
8. 8T-4896 C [92] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 167-1311 C [2] PLATE AS  
10. 167-1314 C [4] PLATE AS  
11. 9R-2959 C [2] CLIP  
12. 170-7172 C [2] PLATE AS  
    (EACH INCLUDES)
  109-5639 [2] ANGLE  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 169-0173 [1] PLATE AS  
15. 169-0171 [4] PLATE  
16. 169-0174 [1] PLATE AS  
  8T-5912 [1] NUT-WELD (3/8-16-THD)  
17. 109-7799 [1] PIN AS  
  4B-5277 [1] WASHER (0.938X2.25X0.156-IN THK)  
18. 172-5630 C [2] PIN AS  
    (EACH INCLUDES)
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-7797 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 109-7805 [1] BAR  
25. 167-4290 C [1] EYEBOLT (3/4-10-THD)  
26. 109-5629 [8] SHOE AS  
27. 109-5632 [16] RUNNER  
28. 119-5915 [32] U-BOLT (1/4-20-THD)  
29. 6V-8185 [64] NUT (1/4-20-THD)  
30. 8T-4205 [64] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 6V-8182 [2] NUT (3/4-10-THD)  
32. 8T-4994 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 9N-8909 [1] STRINGLINE  
34. 109-5658 [2] SUPPORT AS-GUIDE  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
35. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
36. 6V-8188 [4] NUT (1/2-13-THD)  
37. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
38. 7X-0292 C [24] BOLT (3/8-16X4.5-IN)  
39. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
40. 4L-6454 [1] BOLT (3/8-16X1-IN)  
41. 106-4604 [1] TUBE  
42. 199-4198 [1] TUBE AS  
43. 8T-4244 M [6] NUT (M12X1.75-THD)  
44. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
45. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
46. 293-1022 [2] MOUNT AS  
47. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
48. 8T-4132 M [4] NUT (M16X2-THD)  
49. 8T-4193 M [4] BOLT (M16X2X50-MM)  
50. 7X-2554 M [4] BOLT (M16X2X70-MM)  
51. 432-2435 [2] MOUNT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
52. 450-5685 [2] SUPPORT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
53. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
54. 329-3356 M [4] NUT (M12X1.75-THD)  
55. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00770415
 

109-5624: LEVELER GP

109-5624 LEVELER GP -12-FT GRADE REF, INBOARD
S/N 1JG1-UP
Type 1
AN ATTACHMENT
i00491255 KEBP0077
1095624 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 081-7770 [1] BEAM  
2. 081-9638 [2] CHANNEL  
3. 081-7209 [6] BRACKET  
4. 7X-0334 [4] BOLT (1/2-13X5-IN)  
5. 2H-3788 [4] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [32] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 [50] NUT (3/8-16-THD)  
8. 8T-4896 [36] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 109-5659 [1] SHAFT  
10. 081-7769 [2] BEAM-END  
11. 6S-4975 [2] ROD  
12. 109-5635 [2] TUBE AS  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 109-5642 [2] BRACKET AS  
15. 109-5648 [2] PLATE  
16. 9N-8909 [1] STRINGLINE  
17. 122-1153 BC [2] SUPPORT AS-GUIDE  
  7X-0443 B [4] BOLT (1-8X5.5-IN)  
    -OR-
  122-1155 B [2] SUPPORT AS-GUIDE  
  8T-2502 B [4] BOLT (3/8-16X1.125-IN)  
    -OR-
  122-1157 B [2] SUPPORT AS-GUIDE  
  7X-0387 B [4] BOLT (7/8-9X4-IN)  
18. 081-7524 [2] PIN-HITCH  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-5634 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 113-9125 [1] BAR  
25. 109-5661 [2] ROD END  
26. 109-5629 [4] SHOE AS  
27. 109-5632 [8] RUNNER  
28. 119-5915 C [16] U-BOLT (1/4-20-THD)  
29. 6V-8185 [32] NUT (1/4-20-THD)  
30. 8T-4205 [32] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 2H-3725 [2] BOLT (3/4-16X1.5-IN)  
32. 8T-4994 C [3] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 8T-8917 C [10] BOLT (1/2-13X1.25-IN)  
34. 6V-8188 C [10] NUT (1/2-13-THD)  
35. 109-5660 [2] SUPPORT AS  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
36. 8T-8915 [4] BOLT (3/8-16X3.25-IN)  
37. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
38. 8T-9379 [8] BOLT (3/8-16X4.25-IN)  
39. 122-1104 C [1] ROD AS  
40. 122-1150 C [1] TUBE AS  
41. 8T-9397 C [1] BOLT (3/4-10X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00770416
 

109-5624: LEVELER GP

109-5624 LEVELER GP -12-FT GRADE REF, INBOARD
S/N 1JG1-UP
Type 2
AN ATTACHMENT
i01141791 KEBP0077
1095624 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-9632 C [1] BEAM  
2. 081-9638 [2] CHANNEL  
3. 081-7209 [6] BRACKET  
4. 7X-0334 [6] BOLT (1/2-13X5-IN)  
5. 2H-3788 C [6] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [32] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 C [48] NUT (3/8-16-THD)  
8. 8T-4896 C [46] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 109-5659 [1] SHAFT  
10. 172-5628 C [1] TUBE AS  
11. 167-1314 C [2] PLATE AS  
12. 109-5635 C [1] TUBE AS  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 169-0173 C [2] PLATE AS  
15. 169-0171 C [3] PLATE  
16. 9N-8909 [1] STRINGLINE  
17. 122-1153 B [2] SUPPORT AS-GUIDE  
  7X-0443 B [4] BOLT (1-8X5.5-IN)  
    -OR-
  122-1155 B [2] SUPPORT AS-GUIDE  
  8T-2502 [4] BOLT (3/8-16X1.125-IN)  
    -OR-
  122-1157 B [2] SUPPORT AS-GUIDE  
  7X-0387 B [4] BOLT (7/8-9X4-IN)  
    -OR-
  231-1393 B [1] PLATE AS  
  8T-4121 B [4] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4195 BM [4] BOLT (M10X1.5X30-MM)  
18. 6V-8182 [4] NUT (3/4-10-THD)  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-5634 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 113-9125 [1] BAR  
25. 167-4290 C [2] EYEBOLT (3/4-10-THD)  
26. 109-5629 [4] SHOE AS  
27. 109-5632 [8] RUNNER  
28. 119-5915 [16] U-BOLT (1/4-20-THD)  
29. 6V-8185 [32] NUT (1/4-20-THD)  
30. 8T-4205 [32] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 4L-6454 [2] BOLT (3/8-16X1-IN)  
32. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
34. 6V-8188 [10] NUT (1/2-13-THD)  
35. 109-5660 [2] SUPPORT AS  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
36. 8T-8915 [4] BOLT (3/8-16X3.25-IN)  
37. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
38. 7X-0292 C [8] BOLT (3/8-16X4.5-IN)  
39. 122-1104 [1] ROD AS  
40. 122-1150 [1] TUBE AS  
41. 8T-9397 [1] BOLT (3/4-10X1.25-IN)  
42. 9L-9132 C [2] WASHER (10.2X25.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00770417
 

109-5624: LEVELER GP

109-5624 LEVELER GP -12-FT GRADE REF, INBOARD
S/N 1JG1-UP
Type 3
AN ATTACHMENT
i02641069 KEBP0077
1095624 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-9632 [1] BEAM  
2. 081-9638 [2] CHANNEL  
3. 081-7209 [6] BRACKET  
4. 7X-0334 [6] BOLT (1/2-13X5-IN)  
5. 9X-0941 [6] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [32] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 [48] NUT (3/8-16-THD)  
8. 8T-4896 [46] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 109-5659 [1] SHAFT  
10. 167-1314 [2] PLATE AS  
11. 172-5628 [1] TUBE AS  
12. 109-5635 [1] TUBE AS  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 169-0173 [2] PLATE AS  
15. 169-0171 [3] PLATE  
16. 9N-8909 [1] STRINGLINE  
17. 122-1153 [2] SUPPORT AS-GUIDE  
18. 7X-2554 CM [4] BOLT (M16X2X70-MM)  
19. 109-5649 [2] COLLAR  
20. 140-8793 [2] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-5634 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 113-9125 [1] BAR  
25. 167-4290 [2] EYEBOLT (3/4-10-THD)  
26. 109-5629 [4] SHOE AS  
27. 109-5632 [8] RUNNER  
28. 119-5915 [16] U-BOLT (1/4-20-THD)  
29. 6V-8185 [32] NUT (1/4-20-THD)  
30. 8T-4205 [32] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 6V-8182 [4] NUT (3/4-10-THD)  
32. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
34. 6V-8188 [10] NUT (1/2-13-THD)  
35. 109-5660 [2] SUPPORT AS  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
36. 8T-8915 [4] BOLT (3/8-16X3.25-IN)  
37. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
38. 7X-0443 [4] BOLT (1-8X5.5-IN)  
39. 122-1104 [1] ROD AS  
40. 122-1150 [1] TUBE AS  
41. 8T-9397 [1] BOLT (3/4-10X1.25-IN)  
42. 7X-0292 [8] BOLT (3/8-16X4.5-IN)  
43. 9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
44. 4L-6454 [2] BOLT (3/8-16X1-IN)  
45. 231-1393 C [2] PLATE AS  
46. 8T-4121 C [24] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4195 CM [14] BOLT (M10X1.5X30-MM)  
48. 106-4604 C [1] TUBE  
49. 199-4198 C [1] TUBE AS  
50. 8T-4244 CM [6] NUT (M12X1.75-THD)  
51. 8T-4139 CM [4] BOLT (M12X1.75X30-MM)  
52. 8T-4183 CM [6] BOLT (M12X1.75X40-MM)  
53. 293-1022 C [2] MOUNT AS  
54. 8T-4122 C [4] WASHER-HARD (17X32X3.5-MM THK)  
55. 8T-4132 CM [4] NUT (M16X2-THD)  
56. 8T-4193 CM [4] BOLT (M16X2X50-MM)  
57. 318-8747 [2] PLATE  
58. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
59. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
60. 8T-4133 M [6] NUT (M10X1.5-THD)  
61. 432-2435 [2] MOUNT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
62. 416-1187 [1] TUBE AS  
63. 450-5685 [2] SUPPORT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
64. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
65. 329-3356 M [4] NUT (M12X1.75-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00770418
 

109-5625: LEVELER GP

109-5625 LEVELER GP -FORE, AFT, INBOARD
S/N 1JG1-UP
Type 2
AN ATTACHMENT
i01141854 KEBP0077
1095625 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-9632 C [2] BEAM  
2. 081-9638 [2] CHANNEL  
3. 081-7209 C [7] BRACKET  
4. 7X-0334 C [7] BOLT (1/2-13X5-IN)  
5. 2H-3788 C [7] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [42] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 C [62] NUT (3/8-16-THD)  
8. 8T-4896 C [62] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 109-5659 [1] SHAFT  
10. 167-1314 C [3] PLATE AS  
11. 4L-6454 [2] BOLT (3/8-16X1-IN)  
12. 172-5628 C [2] TUBE AS  
13. 109-5641 C [2] EYEBOLT (3/8-16-THD)  
14. 169-0173 C [2] PLATE AS  
15. 169-0171 C [5] PLATE  
16. 169-0174 C [1] PLATE AS  
  8T-5912 [1] NUT-WELD (3/8-16-THD)  
17. 122-1153 BC [2] SUPPORT AS-GUIDE  
  7X-0443 B [4] BOLT (1-8X5.5-IN)  
    -OR-
  122-1155 B [2] SUPPORT AS-GUIDE  
  8T-2502 B [4] BOLT (3/8-16X1.125-IN)  
    -OR-
  122-1157 B [2] SUPPORT AS-GUIDE  
  7X-0387 B [4] BOLT (7/8-9X4-IN)  
    -OR-
  231-1393 B [1] PLATE AS  
  8T-4121 B [4] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4195 BM [4] BOLT (M10X1.5X30-MM)  
18. 7X-0293 C [4] BOLT (3/8-16X4.75-IN)  
19. 109-5649 [2] COLLAR  
20. 140-8793 [4] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-5634 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 109-7805 [1] BAR  
25. 167-4290 C [2] EYEBOLT (3/4-10-THD)  
26. 109-5629 [4] SHOE AS  
27. 109-5632 [8] RUNNER  
28. 119-5915 [16] U-BOLT (1/4-20-THD)  
29. 6V-8185 [32] NUT (1/4-20-THD)  
30. 8T-4205 [32] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 6V-8182 [4] NUT (3/4-10-THD)  
32. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 9N-8909 [1] STRINGLINE  
34. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
35. 6V-8188 [10] NUT (1/2-13-THD)  
36. 172-7077 C [1] TUBE  
37. 109-5658 [2] SUPPORT AS-GUIDE  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
38. 8T-8915 [4] BOLT (3/8-16X3.25-IN)  
39. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
40. 122-1104 [1] ROD AS  
41. 122-1150 [1] TUBE AS  
42. 8T-9397 [1] BOLT (3/4-10X1.25-IN)  
43. 9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
44. 081-7211 [1] SHOE-PAN  
45. 7X-0292 [8] BOLT (3/8-16X4.5-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00770419
 

109-5625: LEVELER GP

109-5625 LEVELER GP -FORE, AFT, INBOARD
S/N 1JG1-UP
Type 1
AN ATTACHMENT
i00561662 KEBP0077
1095625 LEVELER GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 081-7770 [2] BEAM  
2. 081-9638 [2] CHANNEL  
3. 081-7209 [7] BRACKET  
4. 7X-0334 [5] BOLT (1/2-13X5-IN)  
5. 2H-3788 [5] LOCKNUT (1/2-13-THD)  
6. 9B-7237 [44] BOLT (3/8-16X1.25-IN)  
7. 6V-8801 [70] NUT (3/8-16-THD)  
8. 8T-4896 [46] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 109-5659 [1] SHAFT  
10. 081-7769 [2] BEAM-END  
11. 6S-4975 [4] ROD  
12. 109-5635 [2] TUBE AS  
13. 109-5641 [2] EYEBOLT (3/8-16-THD)  
14. 109-5642 [2] BRACKET AS  
15. 109-5648 [3] PLATE  
16. 109-5636 [1] BRACKET AS-GUIDE  
17. 122-1153 B [2] SUPPORT AS-GUIDE  
  7X-0443 B [4] BOLT (1-8X5.5-IN)  
    -OR-
  122-1155 B [2] SUPPORT AS-GUIDE  
  8T-2502 B [4] BOLT (3/8-16X1.125-IN)  
    -OR-
  122-1157 B [2] SUPPORT AS-GUIDE  
  7X-0387 B [4] BOLT (7/8-9X4-IN)  
18. 081-7524 [2] PIN-HITCH  
19. 109-5649 [2] COLLAR  
20. 140-8793 [4] COLLAR  
21. 109-5651 [1] ARM AS  
22. 109-5634 [1] TUBE AS  
23. 109-7798 [1] ROD AS  
  109-7807 [1] BAR  
24. 109-7805 [1] BAR  
25. 109-5661 [2] ROD END  
26. 109-5629 [4] SHOE AS  
27. 109-5632 [8] RUNNER  
28. 119-5915 [16] U-BOLT (1/4-20-THD)  
29. 6V-8185 [32] NUT (1/4-20-THD)  
30. 8T-4205 [32] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 2H-3725 [2] BOLT (3/4-16X1.5-IN)  
32. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
33. 9N-8909 [1] STRINGLINE  
34. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
35. 6V-8188 [10] NUT (1/2-13-THD)  
36. 109-5655 [1] TUBE  
37. 109-5658 [2] SUPPORT AS-GUIDE  
    (EACH INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
38. 8T-8915 [4] BOLT (3/8-16X3.25-IN)  
39. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
40. 122-1104 [1] ROD AS  
41. 122-1150 [1] TUBE AS  
42. 8T-9397 [1] BOLT (3/4-10X1.25-IN)  
43. 9L-9132 [2] WASHER (10.2X25.5X2.5-MM THK)  
44. 8T-9379 [8] BOLT (3/8-16X4.25-IN)  
45. 081-7211 [1] SHOE-PAN  
  B   USE AS REQUIRED
 

Information:

Special Instruction
Installation of Feed Sensor Control{5643}
Installation of Feed Sensor Control{5643}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Specifications
Feed Control Sensor
AP-1050 ASPHALT PAVER CONVEYOR SYSTEMS
Engine Oil Pressure
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Magnetic Pickup
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Engine Oil Pressure Sensor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New Feeder Sensor Mount Available{5643}
1991/10/07
Replacement Knob Now Available For Sonic Feeder Control Sensors{5643}
1995/09/25
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
A New Position for the Feeder Sensor is Now Available for the Asphalt Pavers {5657}
2005/10/31
Two Ways to Contact a Repair Center for the Topcon Grade/Slope Control Systems {7219, 7220}
2005/10/31
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
New Arm in the Auger Sensor Gp is Now Used on Certain Asphalt Pavers {5643, 5657}
2010/12/23
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}

Caterpillar Parts SIS Catalog AP-1050 :

SENSOR GP-GRADE
8C-4337 SENSOR GP-GRADE
MOUNTING GP-CONTROL
112-4043 MOUNTING GP-CONTROL
MOUNTING GP-CONTROL
112-4043 MOUNTING GP-CONTROL
GRADE CONTROL GP
5E-9890 GRADE CONTROL GP
CONTROLLER GP
8T-8029 CONTROLLER GP
CONTROL GP-SLOPE
8T-8030 CONTROL GP-SLOPE
CONTROL GP-SLOPE
8T-8028 CONTROL GP-SLOPE
CONTROL GP-SLOPE
7X-8776 CONTROL GP-SLOPE
LEVELER GP
109-5622 LEVELER GP
LEVELER GP
109-5622 LEVELER GP
LEVELER GP
109-5623 LEVELER GP
LEVELER GP
109-5623 LEVELER GP
LEVELER GP
109-5624 LEVELER GP
LEVELER GP
109-5624 LEVELER GP
LEVELER GP
109-5624 LEVELER GP
LEVELER GP
109-5625 LEVELER GP

Truck sale:

Caterpillar AP-1050
 
Caterpillar AP-1050
- Asphalt Pavers
WAGNER EQUIPMENT CO
Caterpillar AP-1050, Construction
30,142 
Caterpillar AP-1050, Construction
- Asphalt pavers
FINNING CANADA
Canada
CATERPILLAR AP-1050 1990
 
CATERPILLAR AP-1050 1990
- ASPHALT PAVERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR AP-1050 1996
 
CATERPILLAR AP-1050 1996
- ASPHALT PAVERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR AP1050 1991
$19,000 USD 
CATERPILLAR AP1050 1991
- ASPHALT PAVERS
EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.