AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

245-2926 CROWN GP-POWER 24-VOLT AN ATTACHMENT 10-20B ASPHALT SCREED


CONTROLS
CROWN GP
SLOPER GP
MOTOR GP-POWER ADJUSTER
CROWN GP
SLOPER GP

ASPHALT SCREED 10-20B ASPHALT SCREED BWN
 10-20B Screed BWN00001-UP KEBP0279 10-20B BWN   (2003)

CONTROLS

CROWN GP
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
CROWN GP
288-7306 CROWN GP
CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-POWER
245-2926 CROWN GP-POWER
CROWN GP-POWER
276-4590 CROWN GP-POWER
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
 

#KEBP02790020
 

245-2926: CROWN GP-POWER

245-2926 CROWN GP-POWER
24-VOLT
AN ATTACHMENT
i02060953 KEBP0279
2452926 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3729 Y [1] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [2] BOLT (3/8-16X1-IN)  
3. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0746 [1] SUPPORT AS-MOTOR  
5. 8T-8920 [4] BOLT (1/2-13X3.25-IN)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6V-8188 [4] NUT (1/2-13-THD)  
8. 8I-0747 [1] SHAFT AS-ADJUSTMENT  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
9. 8I-0280 [1] KEEPER  
10. 8T-7566 [1] PIN-SPRING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02790021
 

276-4590: CROWN GP-POWER

276-4590 CROWN GP-POWER
S/N BWN2336-UP
PART OF 229-3115 SCREED AR
i02513609 KEBP0279
2764590 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 3P-8680 [4] CUP-BEARING  
4. 3P-8681 [4] CONE-BEARING  
5. 8I-0588 [1] PLATE-MOUNTING  
6. 8I-0740 [1] COUPLING GP  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
7. 102-2701 [2] BEARING  
8. 102-2738 [1] POINTER  
9. 102-2739 [1] KEY-SQUARE  
10. 197-9844 Y [1] CHAIN GP-SCREED  
12. 277-2004 Y [1] MOTOR GP-POWER ADJUSTER  
13. 277-3182 [1] FILM-IDENTIFICATION (CROWN)  
14. 282-0630 [1] BRACKET  
15. 282-0633 [1] PLATE  
16. 282-0637 [1] SHAFT AS-ADJUSTMENT  
17. 282-0642 [1] BRACKET AS  
18. 282-7961 Y [2] SHAFT GP-DRIVE (NON-ACTUATED)  
19. 282-8478 [2] BALL JOINT AS  
20. 4L-6454 [2] BOLT (3/8-16X1-IN)  
21. 5C-2890 M [4] NUT (M6X1-THD)  
22. 5C-9553 M [4] BOLT (M6X1X16-MM)  
23. 5J-3941 [2] PIN-SPRING  
24. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
27. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [5] NUT (M10X1.5-THD)  
29. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
30. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
31. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
32. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
33. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
34. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-4244 M [2] NUT (M12X1.75-THD)  
37. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02790022
 

102-2699: JACK GP-SLOPER

102-2699 JACK GP-SLOPER
PART OF 8I-0214 SLOPER GP-MANUAL
i00465644 KEBP0279
1022699 JACK GP-SLOPER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 143-3031 [1] PIPE  
3. 143-3032 [1] SCREW AS-LIFTING  
4. 107-0246 [1] GEAR-WORM  
5. 107-2064 [2] BEARING-THRUST  
6. 4M-5281 [8] BOLT (1/4-20X0.75-IN)  
7. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 4S-7756 [2] SEAL-LIP TYPE  
9. 6D-3852 [2] BALL BEARING  
10. 107-0249 [1] GUIDE-BUSHING  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 111-4249 [1] WORM  
13. 196-5244 [1] CAP  
 

#KEBP02790023
 

165-3728: MOTOR GP-POWER ADJUSTER

165-3728 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 245-2922 SLOPER GP-POWER
AN ATTACHMENT
i02198448 KEBP0279
1653728 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 171-3715 [1] SHAFT-IDLER  
8. 1L-0834 B [1] BEARING AS-NEEDLE (1/2IN SHAFT)  
9. 123-3683 [1] BUSHING-BRONZE (9.6X12.8X9.5-MM THK)  
10. 171-6787 [2] DOWEL  
11. 123-3684 [2] BUSHING-BRONZE (12.8X16X19-MM THK)  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7899 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 [1] RACE-THRUST BEARING  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02790024
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 245-2924 ADJUSTER GP-POWER, 245-2926 CROWN GP-POWER
AN ATTACHMENT
i02198331 KEBP0279
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE (9.6X12.8X9.5-MM THK)  
11. 123-3684 [2] BUSHING-BRONZE (12.8X16X19-MM THK)  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 B [1] RACE-THRUST BEARING (1/2IN SHAFT)  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02790025
 

277-2004: MOTOR GP-POWER ADJUSTER

277-2004 MOTOR GP-POWER ADJUSTER -ACTUATED
S/N BWN2336-UP
24-VOLT
PART OF 276-4590 CROWN GP-POWER
i02513610 KEBP0279
2772004 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE (12.8X16X19-MM THK)  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 277-2002 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, HOUSING COVER, REAR HOUSING & TORQUE LIMITER)
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE (9.6X12.8X9.5-MM THK)  
24. 6L-4082 [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP02790026
 

282-7961: SHAFT GP-DRIVE

282-7961 SHAFT GP-DRIVE -NON-ACTUATED
S/N BWN2336-UP
PART OF 288-7306 CROWN GP, 276-4590 CROWN GP-POWER
i02513612 KEBP0279
2827961 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 282-7963 [1] SPINDLE AS  
 

#KEBP02790027
 

8I-0214: SLOPER GP-MANUAL

8I-0214 SLOPER GP-MANUAL
S/N BWN1-2631
PART OF 229-3115 SCREED AR
i00423717 KEBP0279
8I0214 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-4974 [1] FRAME AS (RH)  
  246-4975 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
1A. 246-5104 [4] BUSHING  
2. 106-6322 [1] SUPPORT AS (LH)  
3. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 065-7893 [2] LOCKWASHER-BEARING  
6. 2H-3778 [4] LOCKNUT  
7. 8I-0217 [2] PIN AS-ACTUATOR  
8. 102-2700 [2] ROD END  
9. 102-2699 Y [2] JACK GP-SLOPER  
10. 8I-0219 [2] SUPPORT AS  
11. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
12. 8I-0248 [2] SCALE-SLOPER  
13. 8I-0234 [2] POINTER  
14. 8I-0221 [1] CARRIER AS (RH)  
15. 8I-0249 [1] CHANNEL  
16. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
17. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
18. 4L-6454 [9] BOLT (3/8-16X1-IN)  
19. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
20. 8T-4896 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6V-8801 [8] NUT (3/8-16-THD)  
22. 253-9037 [4] BOLT (3/4-16X1.75-IN)  
23. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
24. 7X-0445 [2] BOLT (1-1/4-7X5-IN)  
25. 7X-0633 [4] WASHER (34X64.5X4-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02790028
 

8I-0214: SLOPER GP-MANUAL

8I-0214 SLOPER GP-MANUAL
S/N BWN2632-UP
PART OF 229-3115 SCREED AR
i02942180 KEBP0279
8I0214 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-4974 [1] FRAME AS (RH)  
2. 246-4975 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
2A. 246-5104 [4] BUSHING  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 065-7893 [2] LOCKWASHER-BEARING  
6. 2H-3778 [4] LOCKNUT  
7. 8I-0217 [2] PIN AS-ACTUATOR  
8. 102-2700 [2] ROD END  
9. 102-2699 Y [2] JACK GP-SLOPER  
10. 8I-0219 [2] SUPPORT AS  
11. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
12. 8I-0248 [2] SCALE-SLOPER  
13. 8I-0234 [2] POINTER  
14. 313-3427 C [1] CARRIER AS (RH)  
15. 8I-0249 [1] CHANNEL  
16. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
17. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
18. 4L-6454 [9] BOLT (3/8-16X1-IN)  
19. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
20. 8T-4896 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6V-8801 [8] NUT (3/8-16-THD)  
22. 253-9037 [4] BOLT (3/4-16X1.75-IN)  
23. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
24. 7X-0429 [2] BOLT (1-1/4-7X4.5-IN)  
25. 7X-0633 B [4] WASHER (34X64.5X4-MM THK)  
26. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
27. 313-3425 C [1] SUPPORT AS (LH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP02790029
 

8I-0730: SLOPER GP-MANUAL

8I-0730 SLOPER GP-MANUAL
AN ATTACHMENT
i00424243 KEBP0279
8I0730 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0220 [2] SUPPORT AS  
2. 135-8177 [2] LOCKOUT  
3. 8T-8908 [6] BOLT (1/4-20X1-IN)  
4. 8I-0260 [2] WHEEL AS  
5. 102-2714 [2] HANDLE  
6. 8T-7566 [2] PIN-SPRING  
7. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 5S-7349 [2] BOLT (1/4-20X0.5-IN)  
9. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

Information:

Operation and Maintenance Manual
Crown Control
10-20B and 8-16B EXTEND A MAT SCREEDS
Crown Control - Lubricate
10-20B and 8-16B EXTEND A MAT SCREEDS
Special Instruction
Procedure To Install the New Shaft Assemblies on the Screeds for the Large Asphalt Pavers{5639, 6647}
Procedure To Install the New Shaft Assemblies on the Screeds for the Large Asphalt Pavers{5639, 6647}
Specifications
Crown
10-20B and 8-16B Extend-A-Mat Screed
Disassembly and Assembly
Chain (Crown) - Remove and Install
8-16B and 10-20B
Extend-A-Mat Screed
Power Crown - Remove
8-16B and 10-20B
Extend-A-Mat Screed
Power Crown - Install
8-16B and 10-20B
Extend-A-Mat Screed
Crown Group - Remove and Install
8-16B and 10-20B
Extend-A-Mat Screed
Manual Crown - Remove and Install
8-16B and 10-20B
Extend-A-Mat Screed
Service Magazine
A New Shaft Assembly for Crown Control is Now Used on Screeds for Large Asphalt Pavers {5639, 6647}
2006/08/07

Caterpillar Parts SIS Catalog 10-20B :

CROWN GP-MANUAL
8I-0734 CROWN GP-MANUAL
CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
CROWN GP
288-7306 CROWN GP
CONTROL GP-THICKNESS
253-0999 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
253-0996 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
253-0993 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
253-0990 CONTROL GP-THICKNESS
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
CROWN GP-POWER
276-4590 CROWN GP-POWER
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.