AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

276-4590 CROWN GP-POWER S/N A6P1-UP; BNW1-UP PART OF 229-3115 SCREED AR AN ATTACHMENT AP-1055D ASPHALT PAVER


CONTROLS
CROWN GP
ADJUSTER GP
SLOPER GP
MOTOR GP-POWER ADJUSTER
CROWN GP
SLOPER GP

ASPHALT PAVER AP-1055D ASPHALT PAVER A6P
 AP-1055D, BG-2455D Steel Track Asphalt Paver A6P00001-UP (MACHINE) POWERED BY C7 Engine KEBP0306 AP-1055D A6P   (2005)

CONTROLS

CROWN GP
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
CROWN GP
197-5288 CROWN GP
CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
CROWN GP-POWER
276-4590 CROWN GP-POWER
SHAFT GP-DRIVE
197-9849 SHAFT GP-DRIVE
SHAFT GP-DRIVE
197-9850 SHAFT GP-DRIVE
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
 

#KEBP03060170
 

276-4590: CROWN GP-POWER

276-4590 CROWN GP-POWER
S/N A6P1-UP; BNW1-UP
PART OF 229-3115 SCREED AR
AN ATTACHMENT
i02513609 KEBP0306
2764590 CROWN GP-POWER Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 3P-8680 [4] CUP-BEARING  
4. 3P-8681 [4] CONE-BEARING  
5. 8I-0588 [1] PLATE-MOUNTING  
6. 8I-0740 [1] COUPLING GP  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
7. 102-2701 [2] BEARING  
8. 102-2738 [1] POINTER  
9. 102-2739 [1] KEY-SQUARE  
10. 197-9844 Y [1] CHAIN GP-SCREED  
12. 277-2004 Y [1] MOTOR GP-POWER ADJUSTER  
13. 277-3182 [1] FILM-IDENTIFICATION (CROWN)  
14. 282-0630 [1] BRACKET  
15. 282-0633 [1] PLATE  
16. 282-0637 [1] SHAFT AS-ADJUSTMENT  
17. 282-0642 [1] BRACKET AS  
18. 282-7961 Y [2] SHAFT GP-DRIVE (NON-ACTUATED)  
19. 282-8478 [2] BALL JOINT AS  
20. 4L-6454 [2] BOLT (3/8-16X1-IN)  
21. 5C-2890 M [4] NUT (M6X1-THD)  
22. 5C-9553 M [4] BOLT (M6X1X16-MM)  
23. 5J-3941 [2] PIN-SPRING  
24. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
25. 6V-7676 M [2] NUT (M24X3-THD)  
26. 8T-0389 M [1] LOCKNUT (M10X1.5-THD)  
27. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4133 M [5] NUT (M10X1.5-THD)  
29. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
30. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
31. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
32. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
33. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
34. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-4244 M [2] NUT (M12X1.75-THD)  
37. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03060171
 

196-2503: JACK GP-HEIGHT ADJUSTER

196-2503 JACK GP-HEIGHT ADJUSTER
S/N A6P1-UP; BNW1-UP
PART OF 197-5296 ADJUSTER GP-HEIGHT
AN ATTACHMENT
i01541664 KEBP0306
1962503 JACK GP-HEIGHT ADJUSTER Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-5281 [8] BOLT (1/4-20X0.75-IN)  
2. 3B-4504 [8] LOCKWASHER  
3. 6D-3852 [2] BALL BEARING  
4. 4S-7756 [2] SEAL-LIP TYPE  
5. 111-4249 [1] WORM  
6. 196-5244 [1] CAP  
7. 107-2064 [2] BEARING-THRUST  
8. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
9. 207-4921 [1] KEY  
10. 207-4923 [1] BUSHING-GUIDE  
11. 207-4925 [1] SCREW-LIFTING  
12. 207-4926 [1] GEAR-WORM  
13. 4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
14. 207-4928 [1] LOCKNUT  
15. 207-4929 [1] PLUG-EXPANSION  
16. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
 

#KEBP03060172
 

102-2699: JACK GP-SLOPER

102-2699 JACK GP-SLOPER
S/N A6P1-UP; BNW1-UP
PART OF 8I-0214 SLOPER GP-MANUAL
AN ATTACHMENT
i00465644 KEBP0306
1022699 JACK GP-SLOPER Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 143-3031 [1] PIPE  
3. 143-3032 [1] SCREW AS-LIFTING  
4. 107-0246 [1] GEAR-WORM  
5. 107-2064 [2] BEARING-THRUST  
6. 4M-5281 [8] BOLT (1/4-20X0.75-IN)  
7. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 4S-7756 [2] SEAL-LIP TYPE  
9. 6D-3852 [2] BALL BEARING  
10. 107-0249 [1] GUIDE-BUSHING  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 111-4249 [1] WORM  
13. 196-5244 [1] CAP  
 

#KEBP03060173
 

443-3171: KIT-REPAIR

443-3171 KIT-REPAIR
S/N A6P1-UP; BNW1-UP
FIELD INSTALLATION
i06262511 KEBP0306
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  425-9889 BY [1] HARNESS AS-PANEL  
  425-9887 BY [1] HARNESS AS-WIRING (GENERATOR)  
  6V-7357 M [1] BOLT (M6X1X25-MM)  
  099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
  420-0784 B [1] CIRCUIT BREAKER (35-AMPERE)  
  362-6644 B [4] CIRCUIT BREAKER AS (25-AMPERE)  
    (EACH INCLUDES)
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  421-4076 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
  399-5150 [1] GENERATOR GP-HYDRAULIC  
  8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
  1H-3338 [1] LOCKWASHER (EXTERNAL TOOTH)  
  4D-1326 [2] LOCKWASHER (EXTERNAL TOOTH)  
  7H-3937 [2] LOCKWASHER (EXTERNAL TOOTH)  
  5C-2874 M [2] NUT (M5X0.8-THD)  
  5C-7261 M [2] NUT (M8X1.25-THD)  
  6V-8801 [2] NUT (3/8-16-THD)  
  344-5673 M [1] NUT (M6X1-THD)  
  424-1191 [1] PLATE AS  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
  128-2596 D SEAL (1-M)  
  3S-2093 [20] STRAP-CABLE  
  398-8389 [1] STUD  
  8F-7242 [2] WASHER (8.7X15.9X1.6-MM THK)  
  5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  420-0612 [2] WIRE AS-GROUND  
  445-7531 [1] WIRE AS-GROUND  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03060174
 

277-2004: MOTOR GP-POWER ADJUSTER

277-2004 MOTOR GP-POWER ADJUSTER -ACTUATED
S/N A6P1-UP; BNW1-UP
24-VOLT
PART OF 276-4590 CROWN GP-POWER
AN ATTACHMENT
i02513610 KEBP0306
2772004 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 277-2002 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, HOUSING COVER, REAR HOUSING & TORQUE LIMITER)
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
24. 6L-4082 [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP03060175
 

197-9849: SHAFT GP-DRIVE

197-9849 SHAFT GP-DRIVE -REAR
S/N A6P1-UP; BNW1-UP
PART OF 197-5288 CROWN GP
AN ATTACHMENT
i01447094 KEBP0306
1979849 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & NEEDLE BEARINGS)
2. 193-1311 [1] SHAFT AS  
3. 197-9845 [1] SPINDLE AS  
 

#KEBP03060176
 

197-9850: SHAFT GP-DRIVE

197-9850 SHAFT GP-DRIVE -FRONT
S/N A6P1-UP; BNW1-UP
PART OF 197-5288 CROWN GP
AN ATTACHMENT
i01447105 KEBP0306
1979850 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 193-1312 [1] SPINDLE AS  
 

#KEBP03060177
 

282-7961: SHAFT GP-DRIVE

282-7961 SHAFT GP-DRIVE -NON-ACTUATED
S/N A6P1-UP; BNW1-UP
PART OF 276-4590 CROWN GP-POWER
AN ATTACHMENT
i02513612 KEBP0306
2827961 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 282-7963 [1] SPINDLE AS  
 

#KEBP03060178
 

8I-0214: SLOPER GP-MANUAL

8I-0214 SLOPER GP-MANUAL
S/N A6P1-UP; BNW1-UP
PART OF 229-3115 SCREED AR
Type 1
AN ATTACHMENT
i00423717 KEBP0306
8I0214 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-4974 [1] FRAME AS (RH)  
  246-4975 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
1A. 246-5104 [4] BUSHING  
2. 106-6322 [1] SUPPORT AS (LH)  
3. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 065-7893 [2] LOCKWASHER-BEARING  
6. 2H-3778 [4] LOCKNUT  
7. 8I-0217 [2] PIN AS-ACTUATOR  
8. 102-2700 [2] ROD END  
9. 102-2699 Y [2] JACK GP-SLOPER  
10. 8I-0219 [2] SUPPORT AS  
11. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
12. 8I-0248 [2] SCALE-SLOPER  
13. 8I-0234 [2] POINTER  
14. 8I-0221 [1] CARRIER AS (RH)  
15. 8I-0249 [1] CHANNEL  
16. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
17. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
18. 4L-6454 [9] BOLT (3/8-16X1-IN)  
19. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
20. 8T-4896 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6V-8801 [8] NUT (3/8-16-THD)  
22. 253-9037 [4] BOLT (3/4-16X1.75-IN)  
23. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
24. 7X-0445 [2] BOLT (1-1/4-7X5-IN)  
25. 7X-0633 [4] WASHER (34X64.5X4-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03060179
 

8I-0214: SLOPER GP-MANUAL

8I-0214 SLOPER GP-MANUAL
S/N A6P1-UP; BNW1-UP
PART OF 229-3115 SCREED AR
Type 2
AN ATTACHMENT
i02942180 KEBP0306
8I0214 SLOPER GP-MANUAL Parts scheme
  For full view, you need register

Parts for your AP-1055D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-4974 [1] FRAME AS (RH)  
2. 246-4975 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
2A. 246-5104 [4] BUSHING  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 065-7893 [2] LOCKWASHER-BEARING  
6. 2H-3778 [4] LOCKNUT  
7. 8I-0217 [2] PIN AS-ACTUATOR  
8. 102-2700 [2] ROD END  
9. 102-2699 Y [2] JACK GP-SLOPER  
10. 8I-0219 [2] SUPPORT AS  
11. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
12. 8I-0248 [2] SCALE-SLOPER  
13. 8I-0234 [2] POINTER  
14. 313-3427 C [1] CARRIER AS (RH)  
15. 8I-0249 [1] CHANNEL  
16. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
17. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
18. 4L-6454 [9] BOLT (3/8-16X1-IN)  
19. 5S-7383 [8] BOLT (3/8-16X1.75-IN)  
20. 8T-4896 [21] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 6V-8801 [8] NUT (3/8-16-THD)  
22. 253-9037 [4] BOLT (3/4-16X1.75-IN)  
23. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
24. 7X-0429 [2] BOLT (1-1/4-7X4.5-IN)  
25. 7X-0633 B [4] WASHER (34X64.5X4-MM THK)  
26. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
27. 313-3425 C [1] SUPPORT AS (LH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog AP-1055D :

CROWN GP-MANUAL
120-5898 CROWN GP-MANUAL
CROWN GP
197-5288 CROWN GP
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
ADJUSTER GP-HEIGHT
8I-0257 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
197-5296 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT
SEPARATOR GP-WATER
149-2683 SEPARATOR GP-WATER
REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
JACK GP-HEIGHT ADJUSTER
196-2503 JACK GP-HEIGHT ADJUSTER
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
443-3171 KIT-REPAIR
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
SHAFT GP-DRIVE
197-9849 SHAFT GP-DRIVE
SHAFT GP-DRIVE
197-9850 SHAFT GP-DRIVE
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL

Truck sale:

Caterpillar AP-1055D
 
Caterpillar AP-1055D
- Asphalt Pavers
EMPIRE MACHINERY
Caterpillar AP-1055D, Asphalt Pavers, Construction
112,000 
Caterpillar AP-1055D, Asphalt Pavers, Construction
- Asphalt Pavers
TRACTOR & EQUIPMENT CO.
Caterpillar AP-1055D, Asphalt Pavers, Construction
112,000 
Caterpillar AP-1055D, Asphalt Pavers, Construction
- Asphalt Pavers
TRACTOR & EQUIPMENT CO.
Caterpillar AP1055D, Asphalt Pavers, Construction
40,000 
Caterpillar AP1055D, Asphalt Pavers, Construction
- Asphalt Pavers
ALTORFER INDUSTRIES
Caterpillar AP1055D, Asphalt Pavers, Construction
110,080 
Caterpillar AP1055D, Asphalt Pavers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.