SLOPE AND GRADE CONTROL
CONTROL GPBEAM GP
SENSOR GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GPGRADE REFERENCES
LEVELER GPSLOPE AND GRADE CONTROL
CONTROL GP
#KEBP03110540
332-9203: GRADE CONTROL GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-9621 | [2] | HANDLE | |
| 2. | 237-7508 | [8] | LINK | |
| 3. | 257-2029 | [2] | MOUNT AS | |
| 4. | 315-6698 | [2] | SENSOR AS-SONIC (GRADE CONTROL) | |
| 5. | 328-6121 Y | [1] | BEAM GP-AVERAGING | |
| 6. | 330-8593 | [1] | HARNESS AS-SENSOR (GRADE CONTROL) | |
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | ||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 7. | 331-1991 | [2] | MOUNT AS-SENSOR | |
| 8. | 343-5816 | [2] | MOUNT AS-SENSOR | |
| 9. | 351-4852 | [2] | LEVER-CONTROL | |
| 10. | 7X-0366 | [2] | BOLT (3/4-10X2-IN) | |
| 11. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4956 M | [6] | BOLT (M12X1.75X35-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03110541
332-9203: GRADE CONTROL GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-9621 | [2] | HANDLE | |
| 2. | 237-7508 | [8] | LINK | |
| 3. | 257-2029 | [2] | MOUNT AS | |
| 4. | 372-0971 | [2] | SENSOR AS-SONIC (GRADE CONTROL) | |
| 5. | 340-5656 CY | [1] | BEAM GP-AVERAGING (30-FT GRADE REFERENCE) | |
| 6. | 382-2751 Y | [1] | HARNESS AS-SENSOR (GRADE CONTROL) | |
| 7. | 331-1991 | [2] | MOUNT AS-SENSOR | |
| 8. | 343-5816 | [2] | MOUNT AS-SENSOR | |
| 9. | 351-4852 | [2] | LEVER-CONTROL | |
| 10. | 7X-0366 | [2] | BOLT (3/4-10X2-IN) | |
| 11. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4956 M | [6] | BOLT (M12X1.75X35-MM) | |
| 13. | 7K-1181 | [3] | STRAP-CABLE (5.72-MM DIA) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03110542
339-8799: MOUNTING GP-AVERAGING BEAM
339-8799 MOUNTING GP-AVERAGING BEAM -RH
S/N MAT1-UP
PART OF 328-6121 BEAM GP-AVERAGING
AN ATTACHMENT
S/N MAT1-UP
PART OF 328-6121 BEAM GP-AVERAGING
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS#KEBP03110543
339-8800: MOUNTING GP-AVERAGING BEAM
339-8800 MOUNTING GP-AVERAGING BEAM -LH
S/N MAT1-UP
PART OF 328-6121 BEAM GP-AVERAGING
AN ATTACHMENT
S/N MAT1-UP
PART OF 328-6121 BEAM GP-AVERAGING
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS#KEBP03110544
298-0642: SENSOR GP-GRADE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-7611 | [1] | RUNNER-SKATE | |
| 2. | 8C-7612 | [1] | RUNNER-SKATE | |
| 3. | 8C-7613 | [1] | TUBE | |
| 4. | 108-2423 | [1] | CABLE AS | |
| 111-3262 | [2] | NUT (6-32-THD) | ||
| 111-3263 | [2] | NUT (8-32-THD) | ||
| 111-8205 | [1] | BACKSHELL | ||
| 104-6863 | [1] | CLAMP | ||
| 110-4295 | [1] | PLUG | ||
| 110-4296 | [1] | PLUG | ||
| 110-6863 | [1] | CABLE | ||
| 111-1308 | [2] | BUSHING | ||
| 5. | 122-0099 | [1] | ARM-FOLLOWER | |
| 6. | 134-9621 | [4] | HANDLE | |
| 7. | 197-8454 | [1] | TUBE AS | |
| 8. | 376-0155 Y | [1] | SENSOR GP-POSITION (GRADE CONTROL) | |
| 9. | 298-0641 | [1] | TUBE AS | |
| 10. | 298-0644 | [2] | MOUNT AS-SENSOR | |
| 11. | 7X-0366 | [4] | BOLT (3/4-10X2-IN) | |
| 12. | 7X-0618 | [1] | WASHER-HARD (13.5X40X5-MM THK) | |
| 13. | 146-9410 | [2] | COLLAR | |
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03110545
258-6580: SENSOR GP-SONIC
258-6580 SENSOR GP-SONIC -AVERAGING SKI
S/N MAT1-UP
PART OF 257-6255 GRADE CONTROL GP
AN ATTACHMENT
S/N MAT1-UP
PART OF 257-6255 GRADE CONTROL GP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-2410 | [3] | BAIL-TEMPERATURE | |
| 2. | 108-2408 | [3] | SENSOR GP-GRADE (CONTROL) | |
| (EACH INCLUDES) | ||||
| 285-3251 | [1] | PLATE-RETAINER | ||
| 113-1550 | [1] | KIT-TRANSDUCER | ||
| (INCLUDES SCREWS, WRAPS, TRANSDUCER, O-RING SEAL & FOAM KIT) | ||||
| 113-1551 | [1] | KIT-FILTER (FOAM)(GRADE SENSOR) | ||
| (INCLUDES FOAM) | ||||
| 3. | 258-6918 Y | [1] | MOUNTING GP-SENSOR (SONIC SENSOR) | |
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03110546
282-8520: SENSOR GP-SONIC
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-2408 | [1] | SENSOR GP-GRADE (CONTROL) | |
| 113-1551 | [1] | KIT-FILTER (FOAM) | ||
| (INCLUDES FOAMS) | ||||
| 113-1550 | [1] | KIT-TRANSDUCER | ||
| (INCLUDES SCREWS, WRAPS, TRANSDUCER, O-RING SEAL & FOAM KIT) | ||||
| 285-3251 | [1] | PLATE-RETAINER | ||
| 2. | 108-2410 | [1] | BAIL-TEMPERATURE | |
| 3. | 108-2423 | [1] | CABLE AS | |
| 104-6863 | [1] | CLAMP | ||
| 110-4295 | [1] | PLUG | ||
| 110-4296 | [1] | PLUG | ||
| 110-6863 | [1] | CABLE | ||
| 111-1308 | [2] | BUSHING | ||
| 111-3262 | [2] | NUT (6-32-THD) | ||
| 111-3263 | [2] | NUT (8-32-THD) | ||
| 111-8205 | [1] | BACKSHELL | ||
| 4. | 134-9621 | [3] | HANDLE | |
| 5. | 134-9622 | [1] | BRACKET | |
| 6. | 146-9410 | [2] | COLLAR | |
| 7. | 298-0644 | [2] | MOUNT AS-SENSOR | |
| 8. | 264-3631 | [1] | BOLT (3/4-10X2.5-IN) | |
| 9. | 7X-0366 | [2] | BOLT (3/4-10X2-IN) | |
| 10. | 8C-8842 | [1] | BOLT (3/4-10X4-IN) | |
| 11. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
#KEBP03110547
330-6084: SENSOR GP-SONIC
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-4749 | [2] | PLATE | |
| 2. | 134-9621 | [4] | HANDLE | |
| 3. | 146-9410 | [2] | COLLAR | |
| 4. | 187-2082 | [2] | LEVER-CONTROL | |
| 5. | 298-0641 | [1] | TUBE AS | |
| 6. | 298-0644 | [2] | MOUNT AS-SENSOR | |
| 7. | 372-0971 | [1] | SENSOR AS-SONIC (GRADE CONTROL) | |
| 8. | 330-8554 | [1] | CABLE GP-CONTROL | |
| 111-1308 | [2] | BUSHING | ||
| 9. | 331-1991 | [1] | MOUNT AS-SENSOR | |
| 10. | 332-1018 | [2] | PLATE-TAPPED | |
| 11. | 1G-8781 | [4] | CLAMP | |
| 12. | 264-3631 | [1] | BOLT (3/4-10X2.5-IN) | |
| 13. | 7X-0366 | [3] | BOLT (3/4-10X2-IN) | |
| 14. | 9X-2480 M | [4] | BOLT (M6X1X45-MM) | |
| 15. | 351-4852 | [1] | LEVER-CONTROL | |
| M | METRIC PART | |||
#KEBP03110548
348-3783: SENSOR GP-SONIC
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 315-6697 | [1] | SENSOR AS-POSITION (ANGLE) | |
| 334-9446 | [2] | CAP-CONNECTOR | ||
| 2. | 330-6573 | [1] | PLATE-ADAPTER | |
| 3. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
| 4. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 5. | 277-1873 | [2] | CLIP | |
| 6. | 5C-7261 M | [8] | NUT (M8X1.25-THD) | |
| 7. | 8T-4224 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#KEBP03110549
109-5622: LEVELER GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 167-9632 C | [4] | BEAM | |
| 2. | 081-9638 | [4] | CHANNEL | |
| 3. | 081-7209 | [12] | BRACKET | |
| 4. | 7X-0334 | [12] | BOLT (1/2-13X5-IN) | |
| 5. | 9X-0941 C | [12] | LOCKNUT (1/2-13-THD) | |
| 6. | 9B-7237 C | [47] | BOLT (3/8-16X1.25-IN) | |
| 7. | 6V-8801 C | [87] | NUT (3/8-16-THD) | |
| 8. | 8T-4896 C | [108] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 167-1311 C | [2] | PLATE AS | |
| 10. | 167-1314 C | [4] | PLATE AS | |
| 11. | 9R-2959 C | [2] | CLIP | |
| 12. | 170-7172 C | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 109-5639 | [1] | ANGLE | ||
| 13. | 109-5641 | [2] | EYEBOLT (3/8-16-THD) | |
| 14. | 169-0173 C | [1] | PLATE AS | |
| 15. | 169-0171 C | [4] | PLATE | |
| 16. | 169-0174 C | [1] | PLATE AS | |
| 8T-5912 | [1] | NUT-WELD (3/8-16-THD) | ||
| 17. | 109-7799 | [1] | PIN AS | |
| 4B-5277 | [1] | WASHER (0.938X2.25X0.156-IN THK) | ||
| 18. | 172-5630 C | [2] | PIN AS | |
| 19. | 109-5649 | [2] | COLLAR | |
| 20. | 140-8793 | [2] | COLLAR | |
| 21. | 109-5651 | [1] | ARM AS | |
| 22. | 109-7797 | [1] | TUBE AS | |
| 23. | 109-7798 | [1] | ROD AS | |
| 109-7807 | [1] | BAR | ||
| 24. | 109-7805 | [1] | BAR | |
| 25. | 167-4290 C | [1] | EYEBOLT (3/4-10-THD) | |
| 26. | 109-5629 | [8] | SHOE AS | |
| 27. | 109-5632 | [16] | RUNNER | |
| 28. | 119-5915 | [32] | U-BOLT (1/4-20-THD) | |
| 29. | 6V-8185 | [64] | NUT (1/4-20-THD) | |
| 30. | 8T-4205 | [64] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 31. | 6V-8182 | [2] | NUT (3/4-10-THD) | |
| 32. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 33. | 110-8861 E | CORD (915-CM) | ||
| 34. | 170-7176 C | [1] | PLATE AS | |
| 35. | 109-5658 | [2] | SUPPORT AS-GUIDE | |
| (EACH INCLUDES) | ||||
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 36. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 37. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 38. | 4L-9337 | [4] | BOLT (3/8-16X1.5-IN) | |
| 39. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 40. | 7X-0292 C | [32] | BOLT (3/8-16X4.5-IN) | |
| 41. | 9L-9132 | [1] | WASHER (10.2X25.5X2.5-MM THK) | |
| 42. | 7X-2554 BM | [4] | BOLT (M16X2X70-MM) | |
| 43. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 44. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 45. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 46. | 8T-4183 M | [6] | BOLT (M12X1.75X40-MM) | |
| 47. | 8T-4193 BM | [4] | BOLT (M16X2X50-MM) | |
| 48. | 8T-4244 M | [6] | NUT (M12X1.75-THD) | |
| 49. | 106-4604 | [1] | TUBE | |
| 50. | 199-4198 | [1] | TUBE AS | |
| 51. | 293-1022 | [2] | MOUNT AS | |
| 52. | 432-2435 | [2] | MOUNT AS | |
| (EACH INCLUDES) | ||||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 53. | 450-5685 | [2] | SUPPORT AS | |
| (EACH INCLUDES) | ||||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 54. | 8T-5005 M | [4] | BOLT (M10X1.5X70-MM) | |
| 55. | 329-3356 M | [4] | NUT (M12X1.75-THD) | |
| 56. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
