AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

292-8508 WIRING GP-ENGINE S/N C6E1-UP PART OF 242-1327 ENGINE AR-PRIMARY CP-64 VIBRATORY COMPACTOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

VIBRATORY COMPACTOR CP-64 VIBRATORY COMPACTOR C6P
 CS64 CP64 Vibratory Soil Compactor C6P00001-UP (MACHINE) POWERED BY C6.6 Engine KEBP0316 CP-64 C6P   (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONSOLE
279-0493 WIRING GP-CONSOLE
WIRING GP-CONSOLE
285-8407 WIRING GP-CONSOLE
WIRING GP-ENGINE
292-8508 WIRING GP-ENGINE
WIRING GP-ENGINE
292-8508 WIRING GP-ENGINE
WIRING GP-GRADE CONTROL
310-3262 WIRING GP-GRADE CONTROL
WIRING GP-GRADE CONTROL
310-3262 WIRING GP-GRADE CONTROL
 

#KEBP03160150
 

292-8508: WIRING GP-ENGINE

292-8508 WIRING GP-ENGINE
S/N C6E1-UP
PART OF 242-1327 ENGINE AR-PRIMARY
i02547886 KEBP0316
2928508 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-4714 [1] PLATE  
2. 217-9039 [3] STRAP-CABLE  
3. 278-5209 [1] BRACKET  
4. 278-5210 [1] BOLT  
5. 238-8028 [1] TIE-CABLE  
6. 260-5541 [1] HARNESS AS-ENGINE  
 

#KEBP03160151
 

292-8508: WIRING GP-ENGINE

292-8508 WIRING GP-ENGINE
S/N C6E1-UP
PART OF 242-1327, 435-1672 ENGINE AR-PRIMARY
i02717813 KEBP0316
2928508 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 293-1880 C [1] BRACKET  
2. 217-9039 [3] STRAP-CABLE  
3. 278-5209 [1] BRACKET  
4. 348-4637 [1] BOLT  
5. 260-5541 [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP03160152
 

310-3262: WIRING GP-GRADE CONTROL

310-3262 WIRING GP-GRADE CONTROL
S/N C6S1-UP
PART OF 310-3251 GRADE CONTROL AR
Type 1
AN ATTACHMENT
i02913062 KEBP0316
3103262 WIRING GP-GRADE CONTROL Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-0118 [4] CLIP  
2. 177-2215 [1] STRAP-DUAL CLAMP  
3. 287-8257 M [2] BOLT (M6X1X65-MM)  
4. 292-2443 [1] CONTROLLER  
5. 293-6369 [1] PLATE  
6. 312-3663 [1] HARNESS AS-CONTROL  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
  253-8110 [1] PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [6] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  169-0705 [10] SEAL  
  180-9340 [6] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  283-8106 [14] SOCKET-CONNECTOR (20-GA)  
  189-3158 [1] SUPPRESSOR-ARC  
  2L-8071 [2] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
7. 312-3664 [1] HARNESS AS-PLATFORM  
  9X-3401 [23] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [23] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [29] PLUG-SEAL  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  180-9340 [11] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  2L-8071 [2] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
8. 316-6126 [1] HARNESS AS-MONITOR  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  248-5358 [1] PLUG AS-CONNECTOR (39-PIN)  
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  180-9340 [14] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
9. 130-5300 [2] CLIP  
10. 4P-7581 [1] CLIP (LADDER)  
11. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
12. 7K-1181 [11] STRAP-CABLE  
13. 8M-2773 [1] CLIP (LOOP)  
14. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [1] NUT (M10X1.5-THD)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP03160153
 

310-3262: WIRING GP-GRADE CONTROL

310-3262 WIRING GP-GRADE CONTROL
S/N C6S1-UP
PART OF 310-3251 GRADE CONTROL AR
Type 2
AN ATTACHMENT
i03042021 KEBP0316
3103262 WIRING GP-GRADE CONTROL Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-0118 [4] CLIP  
2. 177-2215 C [2] STRAP-DUAL CLAMP  
3. 287-8257 M [2] BOLT (M6X1X65-MM)  
4. 368-8125 [1] CONTROL GP-ELECTRONIC  
5. 293-6369 [1] PLATE  
6. 312-3663 [1] HARNESS AS-CONTROL  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
  253-8110 [1] PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [6] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  169-0705 [10] SEAL  
  180-9340 [6] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  283-8106 [14] SOCKET-CONNECTOR (20-GA)  
  189-3158 [1] SUPPRESSOR-ARC  
  2L-8071 [2] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
7. 312-3664 [1] HARNESS AS-PLATFORM  
  9X-3401 [23] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [23] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [29] PLUG-SEAL  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  180-9340 [11] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  2L-8071 [2] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
8. 316-6126 [1] HARNESS AS-MONITOR  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  248-5358 [1] PLUG AS-CONNECTOR (39-PIN)  
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  180-9340 [14] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
9. 130-5300 C [1] CLIP  
10. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
11. 5P-4115 C [2] WASHER-HARD (7.2X19X2-MM THK)  
12. 7K-1181 [11] STRAP-CABLE  
13. 8M-2773 [1] CLIP (LOOP)  
14. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [1] NUT (M10X1.5-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP03160154
 

272-2919: WIRING GP-MACHINE

272-2919 WIRING GP-MACHINE
S/N C6P1-UP; C6S1-UP
PART OF 262-0792 ELECTRICAL AR
i02786279 KEBP0316
2722919 WIRING GP-MACHINE Parts scheme 2722919 WIRING GP-MACHINE Parts scheme 2722919 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [12] STRAP-CABLE  
3. 4S-5719 [1] SPACER (10.31X25X12.7-MM THK)  
4. 6L-3483 [2] COVER-TERMINAL  
5. 7E-0976 [2] BOOT  
6. 7V-5628 [6] PLATE (TOP)  
7. 7V-9275 [2] STRAP  
8. 8T-8799 [5] BOOT (RED)  
9. 102-8703 [5] PLATE-COVER  
10. 118-3534 Y [2] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
11. 139-2116 Y [1] SWITCH GP-TOGGLE (ENGINE SHUTDOWN)  
12. 171-2208 [2] CIRCUIT BREAKER AS (60-AMPERE)(BATTERY)  
    (EACH INCLUDES)
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
13. 171-2210 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  253-2111 [2] LOCKWASHER  
14. 174-3016 [1] PLUG AS-CONNECTOR (3-PIN)  
15. 178-1781 [1] CLIP  
16. 225-8541 [1] PLATE AS  
  178-8505 [1] PLATE-WELD  
17. 271-6414 [2] STRAP AS  
    (EACH INCLUDES)
  8T-5346 E TUBE-HEAT SHRINK (19.1-MM DIA)(1-CM)  
18. 272-1193 [1] PLATE AS  
19. 272-2458 [1] HARNESS AS-WIRING (CIRCUIT BREAKER)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
20. 304-4632 Y [1] HARNESS AS-CHASSIS  
21. 304-8560 [1] PLATE AS  
22. 308-6985 [1] FILM-IDENTIFICATION (CIRCUIT PANEL)  
23. 312-6145 [1] ANGLE  
24. 033-4814 [6] SCREW (10-32X1-IN)  
25. 130-5300 [10] CLIP  
26. 132-5789 [2] CLIP (LADDER)  
27. 154-4966 [2] CLAMP-HALF  
28. 156-3618 [8] CLAMP-HALF  
29. 3K-8106 [2] SCREW-MACHINE (8-32X1-IN)  
30. 4B-4274 [6] WASHER (5.5X13X1.2-MM THK)  
31. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
32. 4P-7428 [1] CLIP (LADDER)  
33. 4P-7581 [1] CLIP (LADDER)  
34. 4P-8134 [7] CLIP (LADDER)  
35. 5C-2874 M [2] NUT (M5X0.8-THD)  
36. 5C-2890 M [4] NUT (M6X1-THD)  
37. 5P-4115 [5] WASHER-HARD (7.2X19X2-MM THK)  
38. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
39. 6N-9349 [1] CIRCUIT BREAKER AS (30-AMPERE)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
40. 7K-1181 [28] STRAP-CABLE  
41. 7R-7908 [4] CLAMP  
42. 7V-6089 [8] CLAMP  
43. 311-8367 [1] PLATE  
44. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
45. 7X-2537 M [3] BOLT (M8X1.25X35-MM)  
46. 7X-7729 [1] WASHER (11X25X3-MM THK)  
47. 8C-8451 M [10] BOLT (M6X1X40-MM)  
48. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [3] NUT (M10X1.5-THD)  
50. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
51. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
52. 8T-4138 M [4] BOLT (M6X1X20-MM)  
53. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
54. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
55. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
57. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
58. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
59. 8T-4244 M [1] NUT (M12X1.75-THD)  
60. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
61. 8T-6912 M [1] BOLT (M8X1.25X50-MM)  
62. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
63. 9X-2480 M [2] BOLT (M6X1X45-MM)  
64. 206-2733 E GUARD-HOSE (35-CM)  
65. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03160155
 

310-3266: WIRING GP-SENSOR

310-3266 WIRING GP-SENSOR -COMPACTION MEASUREMENT
S/N C6S1-UP
PART OF 310-3264 GRADE CONTROL AR
AN ATTACHMENT
i02861666 KEBP0316
3103266 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2215 [2] STRAP-DUAL CLAMP  
2. 178-8505 [1] PLATE-WELD  
3. 203-2328 [1] BOX (PROCESSOR)  
4. 230-6431 [1] PLATE  
5. 248-0342 [1] SENSOR AS (ACCELEROMETER)  
6. 304-9331 [1] BRACKET-GUARD  
7. 103-5676 [2] CLAMP-HALF  
8. 6V-4298 M [4] BOLT (M5X0.8X16-MM)  
9. 7K-1181 [10] STRAP-CABLE  
10. 7X-2534 M [2] BOLT (M6X1X50-MM)  
11. 8C-8451 M [2] BOLT (M6X1X40-MM)  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
16. 5P-5991 D HOSE (2.5-M)  
17. 160-2242 G SLEEVE-ABRASION (50.3-IN)  
  D   ORDER BY THE METER
  G   ORDER BY THE INCH
  M   METRIC PART
 

#KEBP03160156
 

351-4556: WIRING GP-SENSOR

351-4556 WIRING GP-SENSOR -COMPACTION MEASUREMENT
S/N C6S1-UP
AN ATTACHMENT
i05284459 KEBP0316
3514556 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7V-5628 [1] PLATE (TOP)  
2. 177-2215 [1] STRAP-DUAL CLAMP  
3. 178-3620 [1] STRAP-DUAL CLAMP  
4. 178-8505 [1] PLATE-WELD  
5. 309-6976 [1] PLATE  
6. 309-6978 Y [1] HARNESS AS-CONSOLE  
7. 309-9808 [1] GUARD AS  
8. 311-8545 [1] BRACKET AS-CLAMP  
9. 338-0850 [1] METER GP-VIBRATORY  
  8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
10. 103-5676 [2] CLAMP-HALF  
11. 130-5300 [1] CLIP  
12. 1G-9960 [2] CLAMP  
13. 1M-4543 [1] GROMMET  
14. 390-1735 [1] SENSOR AS (COMPACTION)  
15. 390-1736 [1] CABLE AS  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
16. 7K-1181 [9] STRAP-CABLE  
17. 8C-8451 M [6] BOLT (M6X1X40-MM)  
18. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
20. 9M-8406 [3] CLIP (LOOP)  
21. 9X-2045 M [1] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03160157
 

385-1274: WIRING GP-SENSOR

385-1274 WIRING GP-SENSOR -COMPACTION MEASUREMENT
S/N C6S1-UP
FIELD INSTALLATION
i05241733 KEBP0316
3851274 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-3620 [1] STRAP-DUAL CLAMP  
2. 178-8505 [1] PLATE-WELD  
3. 309-9808 [2] GUARD AS  
    (EACH INCLUDES)
  6P-0205 [2] SPACER (0.269X0.405X0.656-IN THK)  
4. 341-3061 [1] PLATE  
5. 385-1275 Y [1] HARNESS AS-SENSOR  
6. 390-1736 [1] CABLE AS  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
7. 130-5300 [3] CLIP  
8. 1G-9960 [2] CLAMP  
9. 390-1735 [1] SENSOR AS (COMPACTION)  
10. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
11. 7K-1181 [8] STRAP-CABLE  
12. 7X-2534 M [1] BOLT (M6X1X50-MM)  
13. 8C-8451 M [4] BOLT (M6X1X40-MM)  
14. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
15. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 9M-8406 [2] CLIP (LOOP)  
17. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
18. 8T-5346 E TUBE-HEAT SHRINK (19.1-MM DIA)(5-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03160158
 

286-0402: AXLE & MTG GP-DRIVE

286-0402 AXLE & MTG GP-DRIVE
S/N C6S1-UP
PART OF 287-2632 POWER TRAIN AR
i02790523 KEBP0316
2860402 AXLE & MTG GP-DRIVE Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-4692 Y [1] PLANETARY GP-FINAL DRIVE (AXLE)  
2. 286-0873 Y [1] AXLE GP-DRIVE (WITH BRAKES)  
3. 7X-0510 [6] WASHER-HARD (15.5X29X3-MM THK)  
4. 7X-2571 M [8] BOLT (M20X2.5X240-MM)  
5. 8S-4734 [6] BOLT (9/16-12X2-IN)  
6. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
7. 8T-4131 M [8] NUT (M20X2.5-THD)  
8. 095-0924 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03160159
 

286-0403: AXLE & MTG GP-DRIVE

286-0403 AXLE & MTG GP-DRIVE
S/N C6P1-UP
PART OF 300-5516 POWER TRAIN AR
i02788060 KEBP0316
2860403 AXLE & MTG GP-DRIVE Parts scheme
  For full view, you need register

Parts for your CP-64 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-4692 Y [1] PLANETARY GP-FINAL DRIVE (AXLE)  
2. 214-2319 [2] PLATE  
3. 286-0874 Y [1] AXLE GP-DRIVE (REAR)  
4. 068-6405 [16] WASHER (26X63.5X6-MM THK)  
5. 7X-0510 [6] WASHER-HARD (15.5X29X3-MM THK)  
6. 8S-4734 [6] BOLT (9/16-12X2-IN)  
7. 8T-4001 M [8] NUT (M24X3-THD)  
8. 9X-8477 M [8] BOLT (M24X3X280-MM)  
9. 095-0924 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog CP-64 :

WIRING GP-CONSOLE
285-8407 WIRING GP-CONSOLE
WIRING GP-CONSOLE
279-0493 WIRING GP-CONSOLE
WIRING GP-CONSOLE
279-0493 WIRING GP-CONSOLE
WIRING GP-CAB
267-1542 WIRING GP-CAB
WIRING GP-CAB
226-8940 WIRING GP-CAB
WARNING GP-BACKUP
262-0796 WARNING GP-BACKUP
SWITCH GP-TOGGLE
139-2116 SWITCH GP-TOGGLE
SWITCH GP-MAGNETIC
254-3783 SWITCH GP-MAGNETIC
WIRING GP-ENGINE
292-8508 WIRING GP-ENGINE
WIRING GP-GRADE CONTROL
310-3262 WIRING GP-GRADE CONTROL
WIRING GP-GRADE CONTROL
310-3262 WIRING GP-GRADE CONTROL
WIRING GP-MACHINE
272-2919 WIRING GP-MACHINE
WIRING GP-SENSOR
310-3266 WIRING GP-SENSOR
WIRING GP-SENSOR
351-4556 WIRING GP-SENSOR
WIRING GP-SENSOR
385-1274 WIRING GP-SENSOR
AXLE & MTG GP-DRIVE
286-0402 AXLE & MTG GP-DRIVE

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.