ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#KEBP03290160
279-0493: WIRING GP-CONSOLE
279-0493 WIRING GP-CONSOLE -VARIABLE VIBRATORY
S/N C8F1-UP; P8F1-UP
PART OF 270-4390 HYDRAULIC AR-VIBRATORY
Type 1
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 270-4390 HYDRAULIC AR-VIBRATORY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6477 | [1] | RELAY AS (24-VOLT) | |
| 2. | 3N-5982 | [1] | KNOB | |
| 3. | 236-8722 | [1] | WASHER (10.5X22.2X1.6-MM THK) | |
| 4. | 240-5204 | [1] | RESISTOR AS | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.1-M) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 116-0118 | [1] | CLIP | ||
| 5. | 270-8384 | [1] | POTENTIOMETER AS | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.3-M EACH) | |||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (25-CM) | |||
| 6. | 313-6383 | [1] | CONTROLLER AS | |
| 7. | 313-6384 | [1] | HARNESS AS-SOLENOID | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 212-8375 | [5] | PLUG | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 122-4376 | [13] | TERMINAL | ||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 8. | 130-5300 | [2] | CLIP | |
| 9. | 9X-2042 M | [1] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 10. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 11. | 287-8257 M | [2] | BOLT (M6X1X65-MM) | |
| 12. | 7K-1181 B | [1] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03290161
279-0493: WIRING GP-CONSOLE
279-0493 WIRING GP-CONSOLE -VARIABLE VIBRATORY
S/N C8F1-UP; P8F1-UP
PART OF 270-4390 HYDRAULIC AR-VIBRATORY
Type 2
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 270-4390 HYDRAULIC AR-VIBRATORY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6477 | [1] | RELAY AS (24-VOLT) | |
| 2. | 110-6109 C | [1] | KNOB-CONTROL (FLOW CONTROL SWITCH) | |
| 3. | 236-8722 | [1] | WASHER (10.5X22.2X1.6-MM THK) | |
| 4. | 240-5204 | [1] | RESISTOR AS | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.1-M) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(4-CM) | |||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 116-0118 | [1] | CLIP | ||
| 5. | 378-3321 C | [1] | POTENTIOMETER AS (PROPEL SPEED) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.3-M EACH) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (25-CM) | |||
| 6. | 313-6383 | [1] | CONTROLLER AS | |
| 7. | 313-6384 | [1] | HARNESS AS-SOLENOID | |
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 212-8375 | [5] | PLUG | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 122-4376 | [13] | TERMINAL | ||
| 111-6792 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 8. | 130-5300 | [2] | CLIP | |
| 9. | 9X-2042 M | [1] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 10. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 11. | 287-8257 M | [2] | BOLT (M6X1X65-MM) | |
| 12. | 7K-1181 B | [1] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03290162
285-8407: WIRING GP-CONSOLE
285-8407 WIRING GP-CONSOLE -VIBRATORY, FIXED FREQUENCY
S/N C8F1-UP; P8F1-UP
PART OF 270-4389 HYDRAULIC AR-VIBRATORY
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 270-4389 HYDRAULIC AR-VIBRATORY
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 285-8406 | [1] | HARNESS AS-SWITCH (VIBRATORY, FIXED FREQUENCY) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 130-5300 | [1] | CLIP | |
#KEBP03290163
292-8508: WIRING GP-ENGINE
For full view, you need register
#KEBP03290164
292-8508: WIRING GP-ENGINE
292-8508 WIRING GP-ENGINE
PART OF 242-1327, 369-7845, 435-1672 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PART OF 242-1327, 369-7845, 435-1672 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
#KEBP03290165
310-3262: WIRING GP-GRADE CONTROL
310-3262 WIRING GP-GRADE CONTROL
S/N C8F1-UP
PART OF 310-3251 GRADE CONTROL AR
Type 1
AN ATTACHMENT
S/N C8F1-UP
PART OF 310-3251 GRADE CONTROL AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-0118 | [4] | CLIP | |
| 2. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 3. | 287-8257 M | [2] | BOLT (M6X1X65-MM) | |
| 4. | 292-2443 | [1] | CONTROLLER | |
| 5. | 293-6369 | [1] | PLATE | |
| 6. | 312-3663 | [1] | HARNESS AS-CONTROL | |
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 253-8110 | [1] | PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 169-0705 | [10] | SEAL | ||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 283-8106 | [14] | SOCKET-CONNECTOR (20-GA) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 7. | 312-3664 | [1] | HARNESS AS-PLATFORM | |
| 9X-3401 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [23] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [29] | PLUG-SEAL | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| 103-8133 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | ||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 8. | 316-6126 | [1] | HARNESS AS-MONITOR | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 248-5358 | [1] | PLUG AS-CONNECTOR (39-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | ||
| 180-9340 | [14] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9. | 130-5300 | [2] | CLIP | |
| 10. | 4P-7581 | [1] | CLIP (LADDER) | |
| 11. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 12. | 7K-1181 | [11] | STRAP-CABLE | |
| 13. | 8M-2773 | [1] | CLIP (LOOP) | |
| 14. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 16. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 17. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03290166
310-3262: WIRING GP-GRADE CONTROL
310-3262 WIRING GP-GRADE CONTROL
S/N C8F1-UP
PART OF 310-3251 GRADE CONTROL AR
Type 2
AN ATTACHMENT
S/N C8F1-UP
PART OF 310-3251 GRADE CONTROL AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-0118 | [4] | CLIP | |
| 2. | 177-2215 C | [2] | STRAP-DUAL CLAMP | |
| 3. | 287-8257 M | [2] | BOLT (M6X1X65-MM) | |
| 4. | 368-8125 | [1] | CONTROL GP-ELECTRONIC | |
| 5. | 293-6369 | [1] | PLATE | |
| 6. | 312-3663 | [1] | HARNESS AS-CONTROL | |
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 253-8110 | [1] | PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 169-0705 | [10] | SEAL | ||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 283-8106 | [14] | SOCKET-CONNECTOR (20-GA) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 7. | 312-3664 | [1] | HARNESS AS-PLATFORM | |
| 9X-3401 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [23] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [29] | PLUG-SEAL | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| 103-8133 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | ||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 8. | 316-6126 | [1] | HARNESS AS-MONITOR | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 248-5358 | [1] | PLUG AS-CONNECTOR (39-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | ||
| 180-9340 | [14] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9. | 130-5300 C | [1] | CLIP | |
| 10. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 11. | 5P-4115 C | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 12. | 7K-1181 | [11] | STRAP-CABLE | |
| 13. | 8M-2773 | [1] | CLIP (LOOP) | |
| 14. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03290167
272-2919: WIRING GP-MACHINE
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [12] | STRAP-CABLE | |
| 3. | 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | |
| 4. | 6L-3483 | [2] | COVER-TERMINAL | |
| 5. | 7E-0976 | [2] | BOOT | |
| 6. | 7V-5628 | [6] | PLATE | |
| 7. | 7V-9275 | [2] | STRAP | |
| 8. | 8T-8799 | [5] | BOOT (RED) | |
| 9. | 102-8703 | [5] | PLATE-COVER | |
| 10. | 118-3534 Y | [2] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 11. | 139-2116 Y | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 12. | 171-2208 | [2] | CIRCUIT BREAKER AS (60-AMPERE)(BATTERY) | |
| (EACH INCLUDES) | ||||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 13. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR) | |
| 8T-0122 | [2] | NUT-FULL (1/4-28-THD) | ||
| 4E-5724 | [2] | WASHER (7X12X1-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 14. | 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | |
| 15. | 178-1781 | [1] | CLIP | |
| 16. | 225-8541 | [1] | PLATE AS | |
| 178-8505 | [1] | PLATE-WELD | ||
| 17. | 271-6414 | [2] | STRAP AS | |
| (EACH INCLUDES) | ||||
| 8T-5346 E | TUBE-HEAT SHRINK (19.1-MM DIA)(1-CM) | |||
| 18. | 272-1193 | [1] | PLATE AS | |
| 19. | 272-2458 | [1] | HARNESS AS-WIRING (CIRCUIT BREAKER) | |
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 20. | 304-4632 Y | [1] | HARNESS AS-CHASSIS | |
| 21. | 304-8560 | [1] | PLATE AS | |
| 22. | 308-6985 | [1] | FILM-IDENTIFICATION (CIRCUIT PANEL) | |
| 23. | 312-6145 | [1] | ANGLE | |
| 24. | 033-4814 | [6] | SCREW (10-32X1-IN) | |
| 25. | 130-5300 | [10] | CLIP | |
| 26. | 132-5789 | [2] | CLIP | |
| 27. | 154-4966 | [2] | CLAMP-HALF | |
| 28. | 156-3618 | [8] | CLAMP-HALF | |
| 29. | 3K-8106 | [2] | SCREW-MACHINE (8-32X1-IN) | |
| 30. | 4B-4274 | [6] | WASHER (5.5X13X1.2-MM THK) | |
| 31. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 32. | 4P-7428 | [1] | CLIP | |
| 33. | 4P-7581 | [1] | CLIP (LADDER) | |
| 34. | 4P-8134 | [7] | CLIP (LADDER) | |
| 35. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 36. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 37. | 5P-4115 | [5] | WASHER-HARD (7.2X19X2-MM THK) | |
| 38. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 39. | 6N-9349 | [1] | CIRCUIT BREAKER AS (30-AMPERE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 40. | 7K-1181 | [28] | STRAP-CABLE | |
| 41. | 7R-7908 | [4] | CLAMP | |
| 42. | 7V-6089 | [8] | CLAMP | |
| 43. | 311-8367 | [1] | PLATE | |
| 44. | 7X-0818 M | [1] | BOLT (M8X1.25X45-MM) | |
| 45. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 46. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 47. | 8C-8451 M | [10] | BOLT (M6X1X40-MM) | |
| 48. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 50. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 51. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 52. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 53. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 54. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 55. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 57. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 58. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 59. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 60. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| 61. | 8T-6912 M | [1] | BOLT (M8X1.25X50-MM) | |
| 62. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 63. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
| 64. | 206-2733 E | GUARD-HOSE (35-CM) | ||
| 65. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03290168
310-3266: WIRING GP-SENSOR
310-3266 WIRING GP-SENSOR -COMPACTION MEASUREMENT
S/N C8F1-UP
PART OF 310-3264 GRADE CONTROL AR
AN ATTACHMENT
S/N C8F1-UP
PART OF 310-3264 GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-2215 | [2] | STRAP-DUAL CLAMP | |
| 2. | 178-8505 | [1] | PLATE-WELD | |
| 3. | 203-2328 | [1] | BOX (PROCESSOR) | |
| 4. | 230-6431 | [1] | PLATE | |
| 5. | 248-0342 | [1] | SENSOR AS (ACCELEROMETER) | |
| 6. | 304-9331 | [1] | BRACKET-GUARD | |
| 7. | 103-5676 | [2] | CLAMP-HALF | |
| 8. | 6V-4298 M | [4] | BOLT (M5X0.8X16-MM) | |
| 9. | 7K-1181 | [10] | STRAP-CABLE | |
| 10. | 7X-2534 M | [2] | BOLT (M6X1X50-MM) | |
| 11. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 12. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 13. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 16. | 5P-5991 D | HOSE (2.5-M) | ||
| 17. | 160-2242 G | SLEEVE-ABRASION (50.3-IN) | ||
| D | ORDER BY THE METER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03290169
312-4211: WIRING GP-SENSOR
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7V-5628 | [1] | PLATE | |
| 2. | 178-3620 | [3] | STRAP-DUAL CLAMP | |
| 3. | 178-8505 | [1] | PLATE-WELD | |
| 4. | 309-6974 | [1] | SENSOR AS | |
| 5. | 309-6976 | [1] | PLATE | |
| 6. | 309-6978 Y | [1] | HARNESS AS-CONSOLE | |
| 7. | 309-9808 | [1] | GUARD AS | |
| 8. | 311-8545 | [1] | BRACKET AS-CLAMP | |
| 9. | 103-5676 | [2] | CLAMP-HALF | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 1G-9960 | [2] | CLAMP | |
| 12. | 1M-4543 | [1] | GROMMET | |
| 13. | 7K-1181 | [18] | STRAP-CABLE | |
| 14. | 8C-8451 M | [6] | BOLT (M6X1X40-MM) | |
| 15. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 17. | 9M-8406 | [3] | CLIP (LOOP) | |
| 18. | 9X-2045 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 19. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
