OPERATOR STATION
CAB GPAIR CONDITIONER GP
HEATER GP
CONTROL GP
PANEL GP
OPERATOR STATION
CAB GP
#KEBP03290380
320-9871: LINER GP-CAB
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-2161 | [1] | STRAP | |
| 2. | 6V-8928 | [1] | HOOK-COAT | |
| 3. | 8N-9033 | [2] | PLUG | |
| 4. | 107-6032 | [1] | LAMP AS-DOME (24-VOLT)(CAB) | |
| 259-1286 | [1] | LAMP (24-VOLT, 10-WATT) | ||
| 5. | 125-7045 | [1] | COVER AS | |
| 6. | 125-7046 | [1] | PLATE AS | |
| 7. | 145-5307 | [1] | PLATE | |
| 8. | 146-9001 | [1] | COVER AS | |
| 4S-8264 | [3] | RIVET-POP | ||
| 120-0596 | [1] | BRACKET | ||
| 9. | 146-9002 | [1] | COVER AS | |
| 10. | 190-4705 | [1] | LINER AS-CAB | |
| 4E-8293 | [6] | FASTENER | ||
| 11. | 190-4706 | [1] | COVER AS (RH) | |
| 12. | 190-4707 | [1] | COVER AS (LH) | |
| (EACH COVER AS INCLUDES) | ||||
| 121-0191 E | FASTENER-LOOP (105-CM) | |||
| 121-0192 E | FASTENER-HOOK (105-CM) | |||
| 13. | 226-0294 J | [1] | LOCK AS | |
| 14. | 226-0341 | [1] | CAM | |
| 15. | 270-9327 | [1] | COVER AS | |
| 17. | 320-9872 | [1] | BOX AS | |
| 18. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 19. | 6V-8490 M | [4] | BOLT (M6X1X25-MM) | |
| 20. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 21. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 22. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 9X-2042 M | [9] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 25. | 9X-2045 M | [1] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 26. | 5P-5637 D | SEAL (0.8-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#KEBP03290381
262-0920: LINES GP-AIR CONDITIONER
262-0920 LINES GP-AIR CONDITIONER
S/N C8F1-UP; P8F1-UP
PART OF 262-0918 OPERATOR AR
Type 1
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 262-0918 OPERATOR AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1G-9960 | [6] | CLAMP | |
| 2. | 7R-7954 | [1] | PLATE | |
| 3. | 7V-5628 | [3] | PLATE | |
| 4. | 102-8703 | [1] | PLATE-COVER | |
| 5. | 102-8705 | [2] | PLATE (TOP) | |
| 6. | 105-9411 | [1] | SUPPORT | |
| 7. | 114-5333 | [1] | SWITCH AS-PRESSURE (COMPRESSOR, HIGH SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (25-CM) | |||
| 8. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER, LOW SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 163-9324 | [1] | PLATE-INSTRUCTION (AIR CONDITIONER) | |
| 10. | 177-2215 | [2] | STRAP-DUAL CLAMP | |
| 11. | 178-3620 | [2] | STRAP-DUAL CLAMP | |
| 12. | 186-6190 Y | [1] | ACCUMULATOR GP-REFRIGERANT (CHARGED) | |
| 13. | 196-4205 M | [2] | BOLT-STACKING (M6X1X44-MM) | |
| 14. | 198-8553 I | [1] | HOSE AS | |
| 15. | 206-0451 M | [4] | BOLT-STACKING (M8X1.25X44-MM) | |
| 16. | 206-0452 | [4] | PLATE | |
| 17. | 239-3291 | [2] | CLAMP-HALF | |
| 18. | 317-9778 I | [1] | HOSE AS | |
| 19. | 276-7281 I | [1] | HOSE AS | |
| 20. | 276-7282 I | [1] | HOSE AS | |
| 21. | 278-2450 | [1] | PLATE AS | |
| 22. | 280-2633 I | [1] | HOSE AS | |
| 23. | 307-2611 I | [1] | HOSE AS | |
| 24. | 156-3616 | [2] | CLAMP-HALF | |
| 25. | 232-0231 | [2] | CLAMP-HALF | |
| 26. | 242-5016 | [10] | CLAMP-HALF | |
| 27. | 6V-4356 | [1] | CLIP (SLOT) | |
| 28. | 6V-4357 | [1] | CLIP (TAB) | |
| 29. | 7X-0818 M | [2] | BOLT (M8X1.25X45-MM) | |
| 30. | 7X-2537 M | [1] | BOLT (M8X1.25X35-MM) | |
| 31. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 32. | 8C-8451 M | [6] | BOLT (M6X1X40-MM) | |
| 33. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 35. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 36. | 9X-7378 | [2] | SEAL-O-RING | |
| 37. | 9X-7380 | [2] | SEAL-O-RING | |
| 38. | 9X-7381 | [2] | SEAL-O-RING | |
| 39. | 9X-7382 | [2] | SEAL-O-RING | |
| 40. | 9X-7383 | [2] | SEAL-O-RING | |
| 41. | 160-2247 G | SLEEVE-ABRASION (22-IN) | ||
| 41A. | 160-2247 G | SLEEVE-ABRASION (12-IN) | ||
| 42. | 7K-1181 | [4] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03290382
262-0920: LINES GP-AIR CONDITIONER
262-0920 LINES GP-AIR CONDITIONER
S/N C8F1-UP; P8F1-UP
PART OF 262-0918 OPERATOR AR
Type 2
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 262-0918 OPERATOR AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1G-9960 | [6] | CLAMP | |
| 2. | 7R-7954 | [1] | PLATE | |
| 3. | 7V-5628 | [3] | PLATE | |
| 4. | 102-8703 | [1] | PLATE-COVER | |
| 5. | 102-8705 | [2] | PLATE (TOP) | |
| 6. | 315-7790 C | [1] | PLATE | |
| 7. | 114-5333 | [1] | SWITCH AS-PRESSURE (COMPRESSOR, HIGH SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (25-CM) | |||
| 8. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER, LOW SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 163-9324 | [1] | PLATE-INSTRUCTION (AIR CONDITIONER) | |
| 10. | 177-2215 | [2] | STRAP-DUAL CLAMP | |
| 11. | 178-3620 | [2] | STRAP-DUAL CLAMP | |
| 12. | 186-6190 Y | [1] | ACCUMULATOR GP-REFRIGERANT (CHARGED) | |
| 13. | 196-4205 M | [2] | BOLT-STACKING (M6X1X44-MM) | |
| 14. | 198-8553 I | [1] | HOSE AS | |
| 15. | 206-0451 M | [4] | BOLT-STACKING (M8X1.25X44-MM) | |
| 16. | 206-0452 | [4] | PLATE | |
| 17. | 239-3291 | [2] | CLAMP-HALF | |
| 18. | 327-8067 CI | [1] | HOSE AS | |
| 19. | 276-7281 I | [1] | HOSE AS | |
| 20. | 276-7282 I | [1] | HOSE AS | |
| 21. | 278-2450 | [1] | PLATE AS | |
| 22. | 280-2633 I | [1] | HOSE AS | |
| 23. | 307-2611 I | [1] | HOSE AS | |
| 24. | 156-3616 | [2] | CLAMP-HALF | |
| 25. | 232-0231 | [2] | CLAMP-HALF | |
| 26. | 222-9820 C | [10] | CLAMP-HALF | |
| 27. | 6V-4356 | [1] | CLIP (SLOT) | |
| 28. | 6V-4357 | [1] | CLIP (TAB) | |
| 29. | 7X-0818 M | [2] | BOLT (M8X1.25X45-MM) | |
| 30. | 7X-2537 M | [1] | BOLT (M8X1.25X35-MM) | |
| 31. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 32. | 8C-8451 M | [6] | BOLT (M6X1X40-MM) | |
| 33. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4195 CM | [1] | BOLT (M10X1.5X30-MM) | |
| 35. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 36. | 9X-7378 | [2] | SEAL-O-RING | |
| 37. | 9X-7380 | [2] | SEAL-O-RING | |
| 38. | 9X-7381 | [2] | SEAL-O-RING | |
| 39. | 9X-7382 | [2] | SEAL-O-RING | |
| 40. | 9X-7383 | [2] | SEAL-O-RING | |
| 41. | 160-2247 G | SLEEVE-ABRASION (22-IN) | ||
| 41A. | 160-2247 G | SLEEVE-ABRASION (12-IN) | ||
| 42. | 7K-1181 | [4] | STRAP-CABLE | |
| 43. | 125-0653 C | [5] | SPACER-SPECIAL (SPLIT) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03290383
262-0920: LINES GP-AIR CONDITIONER
262-0920 LINES GP-AIR CONDITIONER
S/N C8F1-UP; P8F1-UP
PART OF 262-0918 OPERATOR AR
Type 3
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 262-0918 OPERATOR AR
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1G-9960 | [6] | CLAMP | |
| 2. | 7R-7954 | [1] | PLATE | |
| 3. | 7V-5628 | [3] | PLATE | |
| 4. | 102-8703 | [1] | PLATE-COVER | |
| 5. | 102-8705 | [2] | PLATE (TOP) | |
| 6. | 315-7790 | [1] | PLATE | |
| 7. | 114-5333 | [1] | SWITCH AS-PRESSURE (COMPRESSOR, HIGH SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 E | SLEEVE (25-CM) | |||
| 8. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER, LOW SIDE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 110-6395 | [1] | FILM-INSTRUCTION (AIR CONDITIONER) | |
| 10. | 177-2215 | [2] | STRAP-DUAL CLAMP | |
| 11. | 178-3620 | [2] | STRAP-DUAL CLAMP | |
| 12. | 186-6190 Y | [1] | ACCUMULATOR GP-REFRIGERANT (CHARGED) | |
| 13. | 196-4205 M | [2] | BOLT-STACKING (M6X1X44-MM) | |
| 14. | 198-8553 I | [1] | HOSE AS | |
| 15. | 206-0451 M | [4] | BOLT-STACKING (M8X1.25X44-MM) | |
| 16. | 206-0452 | [4] | PLATE | |
| 17. | 239-3291 | [2] | CLAMP-HALF | |
| 18. | 327-8067 I | [1] | HOSE AS | |
| 19. | 276-7281 I | [1] | HOSE AS | |
| 20. | 276-7282 I | [1] | HOSE AS | |
| 21. | 278-2450 | [1] | PLATE AS | |
| 22. | 280-2633 I | [1] | HOSE AS | |
| 23. | 329-6997 CI | [1] | HOSE AS | |
| 24. | 156-3616 | [2] | CLAMP-HALF | |
| 25. | 232-0231 | [2] | CLAMP-HALF | |
| 26. | 222-9820 | [10] | CLAMP-HALF | |
| 27. | 6V-4356 | [1] | CLIP (SLOT) | |
| 28. | 6V-4357 | [1] | CLIP (TAB) | |
| 29. | 7X-0818 M | [2] | BOLT (M8X1.25X45-MM) | |
| 30. | 7X-2537 M | [1] | BOLT (M8X1.25X35-MM) | |
| 31. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 32. | 8C-8451 M | [6] | BOLT (M6X1X40-MM) | |
| 33. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 35. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 36. | 9X-7378 | [2] | SEAL-O-RING | |
| 37. | 9X-7380 | [2] | SEAL-O-RING | |
| 38. | 9X-7381 | [2] | SEAL-O-RING | |
| 39. | 9X-7382 C | [3] | SEAL-O-RING | |
| 40. | 9X-7383 | [2] | SEAL-O-RING | |
| 41. | 160-2247 G | SLEEVE-ABRASION (22-IN) | ||
| 41A. | 160-2247 G | SLEEVE-ABRASION (12-IN) | ||
| 42. | 7K-1181 | [6] | STRAP-CABLE | |
| 43. | 125-0653 | [5] | SPACER-SPECIAL (SPLIT) | |
| 44. | 347-0150 CI | [1] | HOSE AS | |
| 45. | 160-2248 G | SLEEVE-ABRASION (12-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03290384
262-1633: LINES GP-CAB HEATER
262-1633 LINES GP-CAB HEATER
S/N C8F1-UP; P8F1-UP
PART OF 262-0918, 267-2168 OPERATOR AR
Type 1
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 262-0918, 267-2168 OPERATOR AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6P-8855 | [2] | SPACER-TUBE | |
| 2. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 7W-4669 | [1] | ADAPTER | |
| 4. | 9X-2488 | [7] | CLAMP-HOSE | |
| 5. | 033-3168 | [1] | ELBOW | |
| 6. | 102-8705 | [8] | PLATE (TOP) | |
| 7. | 177-2215 | [4] | STRAP-DUAL CLAMP | |
| 8. | 206-0451 M | [1] | BOLT-STACKING (M8X1.25X44-MM) | |
| 9. | 206-0452 | [1] | PLATE | |
| 10. | 213-8647 | [1] | BRACKET | |
| 11. | 307-1650 | [1] | BRACKET AS | |
| 12. | 307-1651 | [1] | PLATE | |
| 13. | 312-4173 | [1] | PLATE AS | |
| 14. | 222-9820 | [16] | CLAMP-HALF | |
| 15. | 242-5016 | [2] | CLAMP-HALF | |
| 16. | 4P-7581 | [1] | CLIP (LADDER) | |
| 17. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 18. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 19. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 20. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 23. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 24. | 8T-6756 | [1] | ELBOW | |
| 25. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| 26. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 27. | 5P-0767 E | HOSE (340-CM) | ||
| 27A. | 5P-0767 E | HOSE (320-CM) | ||
| 27B. | 5P-0767 E | HOSE (92-CM) | ||
| 27C. | 5P-0767 E | HOSE (107-CM) | ||
| 28. | 160-2247 G | SLEEVE-ABRASION (25-IN) | ||
| 28A. | 160-2247 G | SLEEVE-ABRASION (28-IN) | ||
| 28B. | 160-2247 G | SLEEVE-ABRASION (14-IN) | ||
| 29. | 5D-1026 | [1] | CLAMP-BAND | |
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03290385
262-1633: LINES GP-CAB HEATER
262-1633 LINES GP-CAB HEATER
S/N C8F1-UP; P8F1-UP
PART OF 262-0918, 267-2168 OPERATOR AR
Type 2
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
PART OF 262-0918, 267-2168 OPERATOR AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6P-8855 | [2] | SPACER-TUBE | |
| 2. | 7K-1181 | [9] | STRAP-CABLE | |
| 3. | 7W-4669 | [1] | ADAPTER | |
| 4. | 9X-2488 | [7] | CLAMP-HOSE | |
| 5. | 033-3168 | [1] | ELBOW | |
| 6. | 102-8705 | [8] | PLATE (TOP) | |
| 7. | 177-2215 | [4] | STRAP-DUAL CLAMP | |
| 8. | 206-0451 M | [1] | BOLT-STACKING (M8X1.25X44-MM) | |
| 9. | 206-0452 | [1] | PLATE | |
| 10. | 213-8647 | [1] | BRACKET | |
| 11. | 307-1650 | [1] | BRACKET AS | |
| 12. | 307-1651 | [1] | PLATE | |
| 13. | 312-4173 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 14. | 222-9820 C | [18] | CLAMP-HALF | |
| 16. | 4P-7581 | [1] | CLIP (LADDER) | |
| 17. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 18. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 19. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 20. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 23. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 24. | 8T-6756 | [1] | ELBOW | |
| 25. | 8T-6869 M | [3] | BOLT (M8X1.25X60-MM) | |
| 26. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 27. | 5P-0767 E | HOSE (340-CM) | ||
| 27A. | 5P-0767 E | HOSE (320-CM) | ||
| 27B. | 5P-0767 E | HOSE (92-CM) | ||
| 27C. | 5P-0767 E | HOSE (107-CM) | ||
| 28. | 160-2247 G | SLEEVE-ABRASION (25-IN) | ||
| 28A. | 160-2247 G | SLEEVE-ABRASION (28-IN) | ||
| 28B. | 160-2247 G | SLEEVE-ABRASION (14-IN) | ||
| 28C. | 160-2247 G | SLEEVE-ABRASION (19-IN) | ||
| 29. | 5D-1026 | [1] | CLAMP-BAND | |
| 30. | 125-0653 C | [1] | SPACER-SPECIAL (SPLIT) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03290386
292-5040: LINKAGE GP
For full view, you need register
#KEBP03290387
288-4737: METER GP-VIBRATORY
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-2793 | [1] | GROMMET | |
| 2. | 161-6365 | [2] | BRACKET AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 3. | 161-6367 | [1] | PLATE AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 4. | 167-7542 | [2] | BRACKET AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 5. | 167-7543 | [2] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 6. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 7. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 8. | 203-2328 | [1] | BOX (PROCESSOR) | |
| 9. | 203-2329 | [1] | SENSOR (ACCELEROMETER) | |
| 10. | 230-6431 | [1] | PLATE | |
| 11. | 231-0748 | [1] | SPACER | |
| 12. | 235-6980 | [1] | HARNESS AS-SENSOR (PROPEL SPEED) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 248-0338 | [1] | PLATE | |
| 14. | 248-0339 | [1] | ADAPTER | |
| 15. | 250-4195 | [1] | GAUGE-COMPACTION | |
| 16. | 253-0868 | [1] | PLATE AS | |
| 17. | 285-2098 | [1] | HARNESS AS-WIRING (ACCELEROMETER INDICATOR) | |
| 18. | 285-2099 | [1] | INDICATOR (ACCELEROMETER) | |
| 19. | 287-7459 | [1] | PLATE | |
| 20. | 293-5927 | [1] | HARNESS AS-SENSOR (ACCELEROMETER) | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 21. | 293-5928 | [1] | HARNESS AS-SWITCH (VIBRATORY) | |
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 5P-5618 | [1] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7N-7221 | [3] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 22. | 299-2241 | [1] | SENSOR (AXLE) | |
| 23. | 095-0924 | [1] | RING-RETAINING | |
| 24. | 111-4627 M | [4] | SCREW-MACHINE (M6X1X30-MM) | |
| 25. | 119-9453 M | [2] | SCREW (M6X1X16-MM) | |
| 26. | 132-5789 | [1] | CLIP | |
| 27. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 28. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 29. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 30. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 31. | 6P-0699 | [1] | GROMMET | |
| 32. | 7I-2272 M | [4] | BOLT (M5X0.8X12-MM) | |
| 33. | 7K-1181 | [3] | STRAP-CABLE | |
| 34. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 35. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 36. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 37. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 39. | 9X-2044 M | [10] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 40. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
| 41. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 42. | 5P-5991 D | HOSE (0.03-M EACH) | ||
| 43. | 5P-5643 D | SEAL (0.3-M) | ||
| 44. | 160-2242 G | SLEEVE-ABRASION (31.5-IN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03290388
317-8774: METER GP-VIBRATORY
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE) | |
| 2. | 7V-5628 | [1] | PLATE | |
| 3. | 9D-2867 | [1] | LENS-AMBER | |
| 4. | 9D-3127 | [1] | BASE AS-INDICATOR LIGHT | |
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 5. | 9X-7421 | [1] | SEAL-BONDED | |
| 6. | 081-4135 Y | [1] | REGULATOR GP-VOLTAGE | |
| 7. | 3T-0851 M | [1] | LOCKNUT (M5X0.8-THD) | |
| 8. | 157-8674 | [1] | BRACKET | |
| 9. | 167-7542 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 10. | 167-7543 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 11. | 220-1100 | [1] | MODULE | |
| 12. | 275-4093 | [1] | NUT (M18X1.5-THD) | |
| 13. | 276-7284 | [1] | PLATE AS | |
| 14. | 279-4532 | [1] | COVER GP | |
| 15. | 279-4653 | [1] | SLEEVE | |
| 16. | 283-4840 | [1] | TRIGGER | |
| 17. | 289-9933 | [1] | HARNESS AS-SENSOR (SPEED) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 18. | 291-0335 Y | [1] | HARNESS AS-SENSOR (VIBRATION FREQUENCY) | |
| 19. | 317-8764 | [1] | HARNESS AS-MONITOR (RECORDING MODULE) | |
| 5E-7763 | [1] | CONNECTOR | ||
| 5E-7764 | [1] | CONNECTOR | ||
| 5E-7765 | [1] | CONNECTOR | ||
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 7N-7221 | [5] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 3T-2586 | [4] | TERMINAL | ||
| 5E-7767 | [12] | TERMINAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 20. | 095-0924 | [1] | RING-RETAINING | |
| 21. | 111-4627 M | [4] | SCREW-MACHINE (M6X1X30-MM) | |
| 22. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
| 23. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 24. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 25. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 26. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 27. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 28. | 7K-1181 | [3] | STRAP-CABLE | |
| 29. | 7R-7906 | [2] | CLAMP | |
| 30. | 8T-0326 M | [1] | BOLT (M5X0.8X25-MM) | |
| 31. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 32. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 33. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 34. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 8T-9367 | [2] | BOLT (1/4-20X2-IN) | |
| 36. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 37. | 7R-3145 | [1] | SENSOR GP-SPEED (MAGNETIC) | |
| 38. | 282-7939 | [1] | SENSOR-SPEED (PROPEL) | |
| 39. | 282-9830 | [1] | TACHOMETER GP | |
| 274-1306 | [1] | SCREW-PAN HEAD (M2.5X0.45X5-MM) | ||
| 282-9829 | [1] | TACHOMETER | ||
| 282-9832 | [1] | CAP | ||
| 40. | 5P-5643 D | SEAL (0.3-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03290389
328-2039: METER GP-VIBRATORY
328-2039 METER GP-VIBRATORY -RECORDING MODULE, FIXED FREQ
S/N C8F1-UP; P8F1-UP
AN ATTACHMENT
S/N C8F1-UP; P8F1-UP
AN ATTACHMENT
For full view, you need register
Parts for your CS-74 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-5876 | [1] | LAMP (24-VOLT, 0.2-AMPERE)(SPEEDOMETER, TACHOMETER) | |
| 2. | 7R-3145 | [1] | SENSOR GP-SPEED (VIBRATORY) | |
| 3. | 7V-5628 | [1] | PLATE | |
| 4. | 9D-2867 | [1] | LENS-AMBER (ACTION LIGHT) | |
| 5. | 9D-3127 | [1] | BASE AS-INDICATOR LIGHT | |
| 6V-8367 | [1] | LOCKWASHER | ||
| 6V-8382 | [1] | NUT-HEX (11/16-27-THD) | ||
| 6. | 9X-7421 | [1] | SEAL-BONDED | |
| 7. | 081-4135 Y | [1] | REGULATOR GP-VOLTAGE | |
| 8. | 3T-0851 M | [1] | LOCKNUT (M5X0.8-THD) | |
| 9. | 167-7542 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 10. | 167-7543 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 11. | 183-5396 | [1] | BRACKET AS | |
| 12. | 220-1100 | [1] | MODULE | |
| 13. | 275-4093 | [1] | NUT (M18X1.5-THD) | |
| 14. | 276-7284 | [1] | PLATE AS | |
| 15. | 279-4532 | [1] | COVER GP (TACHOMETER) | |
| 16. | 279-4653 | [1] | SLEEVE | |
| 17. | 283-4840 | [1] | TRIGGER | |
| 18. | 289-9933 | [1] | HARNESS AS-SENSOR (SPEED) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9339 | [4] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 19. | 291-0335 Y | [1] | HARNESS AS-SENSOR (VIBRATION FREQUENCY) | |
| 20. | 317-8764 | [1] | HARNESS AS-MONITOR (RECORDING MODULE) | |
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5E-7764 | [1] | CONNECTOR | ||
| 5E-7765 | [1] | CONNECTOR | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9339 | [12] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 21. | 095-0924 | [1] | RING-RETAINING | |
| 22. | 111-4627 M | [4] | SCREW-MACHINE (M6X1X30-MM) | |
| 23. | 1G-9960 | [2] | CLAMP | |
| 24. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 26. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 27. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 28. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 29. | 7K-1181 | [3] | STRAP-CABLE | |
| 30. | 7X-2534 M | [2] | BOLT (M6X1X50-MM) | |
| 32. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 34. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 36. | 5P-5643 D | SEAL (0.3-M) | ||
| 37. | 282-7939 | [1] | SENSOR-SPEED (PROPEL) | |
| 38. | 282-9830 | [1] | TACHOMETER GP (VIBRATORY SPEED) | |
| 274-1306 | [1] | SCREW-PAN HEAD (M2.5X0.45X5-MM) | ||
| 282-9829 | [1] | TACHOMETER | ||
| 282-9832 | [1] | CAP | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
