ELECTRICAL AND STARTING SYSTEM
GENERATOR GPGLOW PLUG GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
GENERATOR GP
#KEBP03370200
270-5315: GENERATOR GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 3. | 7H-3937 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 4. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 5. | 197-9642 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 6. | 220-1209 | [1] | BELT TENSIONER | |
| 7. | 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | |
| 8. | 255-5011 | [1] | RELAY AS (24-VOLT)(SCREED HEAT) | |
| 9. | 270-3558 | [1] | BUSHING | |
| 10. | 276-8163 | [1] | PLATE | |
| 11. | 276-8166 | [1] | SPACER (12X40X7-MM THK) | |
| 12. | 284-2400 | [1] | PLATE | |
| 13. | 284-2886 | [1] | SHEAVE | |
| 14. | 285-8810 | [1] | PLATE | |
| 15. | 286-9960 | [1] | BRACKET AS | |
| 16. | 363-7389 | [1] | BELT-SERPENTINE (ALTERNATOR AIR) | |
| 17. | 324-3727 | [1] | BRACKET AS | |
| 18. | 362-6755 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 19. | 364-6641 | [1] | GUARD | |
| 20. | 367-6331 C | [1] | HARNESS AS-SOLENOID | |
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 21. | 367-6889 C | [1] | WIRE AS-GROUND | |
| 22. | 397-8170 CY | [1] | GENERATOR GP-HYDRAULIC | |
| 23. | 398-8389 | [1] | STUD | |
| 24. | 099-2374 CM | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 25. | 148-8411 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 26. | 164-4180 | [1] | PLUG AS (TRANSMISSION CASE) | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
| 27. | 164-5616 | [1] | PLUG AS (HYDRAULIC TANK) | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 9S-6130 | [1] | PLUG | ||
| 28. | 3B-4504 | [3] | LOCKWASHER | |
| 29. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 30. | 4B-4863 C | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 31. | 4M-5282 | [3] | BOLT (1/4-20X1.5-IN) | |
| 32. | 5C-2874 CM | [2] | NUT (M5X0.8-THD) | |
| 33. | 5C-2890 CM | [2] | NUT (M6X1-THD) | |
| 34. | 5C-7261 M | [6] | NUT (M8X1.25-THD) | |
| 35. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 36. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 37. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 38. | 6V-8801 C | [2] | NUT (3/8-16-THD) | |
| 39. | 6V-9830 | [1] | CAP | |
| 40. | 6V-9831 | [1] | CAP (ORFS) | |
| 41. | 7F-6998 | [1] | LOCKWASHER | |
| 42. | 7P-1695 | [3] | WASHER (10.5X19X3-MM THK) | |
| 43. | 7X-2537 M | [5] | BOLT (M8X1.25X35-MM) | |
| 44. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 45. | 8T-3998 M | [2] | BOLT (M4X0.7X12-MM) | |
| 46. | 8T-4121 C | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 47. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 48. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 49. | 8T-4138 CM | [2] | BOLT (M6X1X20-MM) | |
| 50. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 51. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 52. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 53. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 54. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 55. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 56. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 57. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 58. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 59. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 60. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 61. | 8T-4971 M | [1] | BOLT (M6X1X30-MM) | |
| 62. | 8T-7353 M | [1] | BOLT-HIGH TEMPERATURE (M10X1.5X35-MM) | |
| 63. | 128-2596 CD | SEAL (0.5-M) | ||
| 64. | 1H-3338 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 65. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 66. | 445-7531 | [1] | WIRE AS-GROUND | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370201
270-5315: GENERATOR GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 8X-6645 C | [1] | STRAP AS-GROUND | |
| 3. | 7H-3937 C | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 4. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 5. | 197-9642 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 6. | 220-1209 | [1] | BELT TENSIONER | |
| 7. | 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | |
| 8. | 255-5011 | [1] | RELAY AS (24-VOLT)(SCREED HEAT) | |
| 9. | 270-3558 | [1] | BUSHING | |
| 11. | 276-8166 | [1] | SPACER (12X40X7-MM THK) | |
| 12. | 417-5522 C | [1] | PLATE | |
| 13. | 284-2886 | [1] | SHEAVE | |
| 14. | 417-5523 C | [1] | PLATE | |
| 15. | 286-9960 | [1] | BRACKET AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 16. | 363-7389 | [1] | BELT-SERPENTINE (ALTERNATOR AIR) | |
| 17. | 324-3727 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 18. | 421-4076 C | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 21. | 420-0612 C | [2] | WIRE AS-GROUND | |
| 23. | 398-8389 | [1] | STUD | |
| 24. | 099-2374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 25. | 148-8411 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 26. | 164-4180 | [1] | PLUG AS (TRANSMISSION CASE) | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
| 27. | 164-5616 | [1] | PLUG AS (HYDRAULIC TANK) | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 9S-6130 | [1] | PLUG | ||
| 28. | 3B-4504 | [3] | LOCKWASHER | |
| 29. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 30. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 31. | 4M-5282 | [3] | BOLT (1/4-20X1.5-IN) | |
| 32. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 33. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 34. | 5C-7261 CM | [2] | NUT (M8X1.25-THD) | |
| 35. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 36. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 37. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 38. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 39. | 6V-9830 | [1] | CAP | |
| 43. | 7X-2537 M | [5] | BOLT (M8X1.25X35-MM) | |
| 44. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 45. | 8T-3998 M | [2] | BOLT (M4X0.7X12-MM) | |
| 46. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 47. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 48. | 8T-4133 CM | [3] | NUT (M10X1.5-THD) | |
| 49. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 50. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 51. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 52. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 53. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 54. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 55. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 56. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 57. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 58. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 59. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 60. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 61. | 8T-4971 M | [1] | BOLT (M6X1X30-MM) | |
| 63. | 128-2596 D | SEAL (0.5-M) | ||
| 64. | 1H-3338 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 65. | 8F-7242 C | [2] | WASHER (8.7X15.9X1.6-MM THK) | |
| 66. | 445-7531 | [1] | WIRE AS-GROUND | |
| 67. | 459-1872 C | [1] | PLATE | |
| 68. | 418-2328 C | [1] | HARNESS AS-SOLENOID | |
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 194-5226 | [2] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [2] | WIRE AS (14-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 69. | 417-5521 C | [1] | PLATE | |
| 70. | 399-5150 C | [1] | GENERATOR GP-HYDRAULIC | |
| 71. | 384-3506 C | [1] | HARNESS AS-LIGHTING (SIDE FLOOD, RH, LH) | |
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & INTERFACE SEAL) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS & WEDGE) | ||||
| 72. | 344-5674 CM | [5] | NUT (M8X1.25-THD) | |
| 73. | 290-5562 C | [1] | MOUNT (DUAL SWIVEL) | |
| 74. | 7K-1181 C | [5] | STRAP-CABLE | |
| 75. | 3S-2093 C | [4] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#KEBP03370202
289-5220: GENERATOR GP
289-5220 GENERATOR GP -23-KW
S/N MAN1-UP
PART OF 270-6762 GENERATOR AR-HYDRAULIC
Type 1
AN ATTACHMENT
S/N MAN1-UP
PART OF 270-6762 GENERATOR AR-HYDRAULIC
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 2. | 231-1332 Y | [1] | GENERATOR GP (23-KW) | |
| 3. | 247-4947 | [1] | FILM-INFORMATION (CIRCUIT BREAKER) | |
| 4. | 276-8163 | [1] | PLATE | |
| 5. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 6. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 7. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 8. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 9. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 10. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 11. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 12. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 13. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 15. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370203
289-5220: GENERATOR GP
289-5220 GENERATOR GP -23-KW
S/N MAN1-UP
PART OF 270-6762 GENERATOR AR-HYDRAULIC
Type 2
AN ATTACHMENT
S/N MAN1-UP
PART OF 270-6762 GENERATOR AR-HYDRAULIC
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 2. | 231-1332 Y | [1] | GENERATOR GP (23-KW) | |
| 3. | 322-7952 C | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 4. | 276-8163 | [1] | PLATE | |
| 5. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 6. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 7. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 8. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 9. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 10. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 11. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 12. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 13. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 15. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370204
302-5776: GENERATOR GP
302-5776 GENERATOR GP -HYDRAULIC
S/N MAN1-UP
35-KW
PART OF 314-7786 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
S/N MAN1-UP
35-KW
PART OF 314-7786 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 2. | 397-8168 | [1] | GENERATOR GP-HYDRAULIC | |
| 3. | 307-2415 | [1] | PLATE | |
| 4. | 307-7485 | [1] | PLATE | |
| 5. | 307-7487 | [1] | PLATE | |
| 6. | 307-7489 | [1] | PLATE AS | |
| 7. | 310-8550 | [1] | PLATE | |
| 8. | 311-2996 | [1] | BRACKET | |
| 9. | 322-7953 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 10. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 11. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 12. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 13. | 7D-1649 | [4] | WASHER-HARD (13.5X32X5-MM THK) | |
| 14. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [10] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 19. | 8T-4183 M | [6] | BOLT (M12X1.75X40-MM) | |
| 20. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 21. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 22. | 8T-4223 | [7] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 25. | 8T-6869 M | [2] | BOLT (M8X1.25X60-MM) | |
| 26. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| 27. | 1H-3338 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 28. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 29. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 30. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 31. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 32. | 7F-6998 | [2] | LOCKWASHER | |
| 33. | 7P-1695 | [4] | WASHER (10.5X19X3-MM THK) | |
| 34. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 8T-7353 M | [1] | BOLT-HIGH TEMPERATURE (M10X1.5X35-MM) | |
| 36. | 099-2374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 37. | 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | |
| 38. | 398-8389 | [1] | STUD | |
| 39. | 348-2003 | [1] | WIRE AS-GROUND | |
| 40. | 367-6889 | [1] | WIRE AS-GROUND | |
| 41. | 445-7531 | [1] | WIRE AS-GROUND | |
| 42. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
#KEBP03370205
419-0054: GENERATOR GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-6645 | [1] | STRAP AS-GROUND | |
| 2. | 228-4798 | [1] | FILM-IDENTIFICATION (GROUND)(EARTH) | |
| 3. | 398-8389 | [1] | STUD | |
| 4. | 399-5150 | [1] | GENERATOR GP-HYDRAULIC | |
| 5. | 417-5521 | [1] | PLATE | |
| 6. | 420-0612 | [2] | WIRE AS-GROUND | |
| 7. | 421-4076 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 8. | 445-7531 | [1] | WIRE AS-GROUND | |
| 9. | 099-2374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 10. | 1H-3338 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 11. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 12. | 344-5673 M | [1] | NUT (M6X1-THD) | |
| 13. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 14. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 15. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 16. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 17. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 18. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 19. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 20. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 21. | 7H-3937 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 22. | 8F-7242 | [2] | WASHER (8.7X15.9X1.6-MM THK) | |
| 23. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 24. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 25. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 26. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 29. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 30. | 128-2596 D | SEAL (0.15-M EACH) | ||
| 30A. | 128-2596 D | SEAL (0.075-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#KEBP03370206
288-4229: GENERATOR GP-HYDRAULIC
288-4229 GENERATOR GP-HYDRAULIC
S/N MAN1-312
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
S/N MAN1-312
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9F-3272 | [1] | BALL BEARING | |
| 2. | 261-3536 | [1] | FAN | |
| 3. | 232-0743 | [5] | MOUNT | |
| 4. | 8T-4205 | [18] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 5C-9553 M | [18] | BOLT (M6X1X16-MM) | |
| 6. | 377-9823 | [1] | BOX-TERMINAL | |
| 7. | 6V-0884 | [6] | SCREW-MACHINE (1/4-20X0.375-IN) | |
| 8. | 261-3551 | [1] | PLATE-TERMINAL | |
| 9. | 312-0080 | [1] | REGULATOR AS-VOLTAGE (GENERATOR) | |
| 9A. | 292-7749 | [1] | FUSE (8-AMPERE) | |
| 11. | 261-3546 | [1] | RING | |
| 12. | [1] | EXCITER | ||
| 13. | 261-3548 | [4] | BOLT | |
| 14. | 261-3559 | [1] | SEAL-O-RING | |
| 15. | 261-3545 | [1] | BEARING | |
| 16. | [1] | ARMATURE | ||
| 17. | 261-3557 | [1] | DIODE AS | |
| 18. | 261-3558 | [1] | VARISTOR | |
| 19. | 261-3541 | [4] | TIE ROD | |
| M | METRIC PART | |||
#KEBP03370207
397-8170: GENERATOR GP-HYDRAULIC
397-8170 GENERATOR GP-HYDRAULIC
S/N MAN313-UP
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
S/N MAN313-UP
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 472-6198 | [1] | MOUNT |
#KEBP03370208
277-4410: GLOW PLUG GP
277-4410 GLOW PLUG GP
S/N C6E1-UP
PART OF 242-1319, 369-7848 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N C6E1-UP
PART OF 242-1319, 369-7848 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 462-2235 | [6] | GLOW PLUG (24-VOLT) | |
| 2. | 368-3150 | [1] | BUS BAR GP | |
| 2A. | 277-4408 | [1] | CABLE AS | |
| 2B. | [1] | LOCKNUT | ||
| 3. | 100-4838 M | [1] | BOLT (M6X1X20-MM) | |
| 4. | 275-2428 | [1] | INSULATOR | |
| 5. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 6. | 277-4409 | [1] | CAP | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#KEBP03370209
399-8958: HARNESS AS-AUXILIARY
399-8958 HARNESS AS-AUXILIARY
S/N MAN313-UP
PART OF 288-2631 WIRING GP-SCREED
AN ATTACHMENT
S/N MAN313-UP
PART OF 288-2631 WIRING GP-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 107-1351 | [1] | CONNECTOR-FLEXIBLE | ||
| 3N-9697 | [1] | FERRULE | ||
| 177-9656 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 177-9653 | [3] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 160-2246 G | SLEEVE-ABRASION (74.1-IN) | |||
| 7T-0094 | [12] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(5-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(1-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
