FRAME AND BODY
COVER GPDOOR GP
EXTENSION GP
HOPPER GP
FRAME GP
GATE GP-END
FRAME AND BODY
COVER GP
#KEBP03950220
434-0420: COVER GP-SCREED
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 433-2612 | [1] | PLATE | |
| 2. | 433-2613 | [1] | PLATE | |
| 3. | 433-2614 Y | [1] | DOOR GP-ACCESS | |
| 4. | 434-0415 | [1] | FRAME AS | |
| 5. | 434-0419 | [1] | PLATE AS | |
| 8T-4133 M | [2] | NUT (M10X1.5-THD) | ||
| 6. | 434-0421 | [1] | COVER | |
| 7. | 242-2280 | [4] | SCREW-FLAT HEAD (M8X1.25X14-MM) | |
| 8. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 9. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 10. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 11. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 12. | 8C-7505 M | [4] | SCREW-FLAT HEAD (M8X1.25X20-MM) | |
| 13. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 14. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03950221
431-9259: DOOR GP-ACCESS
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 269-5138 | [4] | WASHER (13X24X3-MM THK) | |
| 2. | 431-9260 | [1] | COVER GP-ACCESS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 3. | 431-9282 Y | [1] | DOOR GP | |
| 4. | 431-9289 Y | [1] | DOOR GP (TOP) | |
| 5. | 461-8830 | [1] | SPRING AS-GAS (DOOR ACCESS) | |
| 6. | 466-2175 | [4] | BUMPER-RUBBER | |
| 7. | 099-3649 M | [1] | BOLT (M8X1.25X40-MM) | |
| 8. | 131-3540 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 9. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 10. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 11. | 6V-5218 M | [1] | BOLT (M8X1.25X35-MM) | |
| 12. | 8T-4224 | [11] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 14. | 9X-2480 M | [4] | BOLT (M6X1X45-MM) | |
| 15. | 5P-7483 D | SEAL (1.12-M EACH) | ||
| 15A. | 5P-7483 D | SEAL (0.373-M EACH) | ||
| 15B. | 5P-7483 D | SEAL (1.25-M) | ||
| 16. | 256-4000 | [2] | SPACER | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03950222
428-9012: EXTENSION GP-MAIN FRAME
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS#KEBP03950223
460-5195: EXTENSION GP-MAIN FRAME
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 466-2175 | [3] | BUMPER-RUBBER | |
| 2. | 256-1241 | [1] | DOOR AS | |
| 3. | 460-5196 | [1] | FRAME AS | |
| 8T-8874 M | [4] | NUT-WELD (M5X0.8-THD) | ||
| 460-5197 | [1] | SHEET | ||
| 460-5198 | [1] | SHEET | ||
| 460-5646 | [1] | PLATE | ||
| 4. | 3E-6754 | [1] | GROMMET | |
| 5. | 7I-2272 M | [4] | BOLT (M5X0.8X12-MM) | |
| 6. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 7. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#KEBP03950224
433-2611: FLASHING GP
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 375-8863 | [2] | FLASHING | |
| 2. | 375-8864 | [4] | FLASHING | |
| 3. | 433-2606 | [1] | PLATE | |
| 4. | 433-2607 | [2] | PLATE | |
| 5. | 433-2608 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 6V-7743 M | [13] | LOCKNUT (M6X1-THD) | |
| 7. | 8C-8451 M | [12] | BOLT (M6X1X40-MM) | |
| 8. | 8T-4197 M | [3] | BOLT (M8X1.25X40-MM) | |
| 9. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 8T-4971 M | [13] | BOLT (M6X1X30-MM) | |
| 11. | 9X-2038 | [26] | WASHER (7X19X2-MM THK) | |
| 12. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| 13. | 8T-4132 M | [2] | NUT (M16X2-THD) | |
| 14. | 170-8556 M | [2] | BOLT (M16X2X140-MM) | |
| M | METRIC PART | |||
#KEBP03950225
535-8864: FRAME GP-MAIN
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 363-7332 Y | [1] | FOOTSHAFT GP | |
| 2. | 363-7333 Y | [1] | DRIVE GP-CONVEYOR | |
| 3. | 419-7475 Y | [2] | ROLLER GP-PUSH | |
| 4. | 419-7484 | [1] | FRAME AS | |
| 7T-1099 | [5] | LINK | ||
| 102-8704 | [3] | PLATE | ||
| 178-8507 | [1] | PLATE-WELD | ||
| 425-3793 | [1] | BRACKET AS | ||
| 5. | 426-0260 Y | [1] | HOPPER GP | |
| 6. | 428-9012 Y | [1] | EXTENSION GP-MAIN FRAME | |
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03950226
377-6073: FRAME GP-SCREED
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 379-8177 | [2] | INDICATOR (SCREED) | |
| 2. | 379-8178 | [1] | KNOB-LOCK | |
| 3. | 379-8188 | [1] | LOCKPIN | |
| 4. | 379-8191 Y | [1] | ADJUSTER GP-MANUAL | |
| 5. | 379-8193 | [1] | PLATE-GAUGE | |
| 6. | 381-0717 | [2] | PLATE-GAUGE | |
| 7. | 178-2991 M | [2] | BOLT-SELF-LOCKING (M20X2.5X70-MM) | |
| 8. | 5C-7261 M | [10] | NUT (M8X1.25-THD) | |
| 9. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 10. | 5P-4116 | [16] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 12. | 8T-4132 M | [4] | NUT (M16X2-THD) | |
| 13. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 15. | 8T-4190 M | [2] | BOLT (M16X2X25-MM) | |
| 16. | 8T-4200 M | [19] | BOLT (M8X1.25X16-MM) | |
| 17. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 19. | 8K-1433 | [2] | GROMMET | |
| 20. | 399-5594 J | [2] | CYLINDER GP-HYDRAULIC | |
| 6V-9275 F | [2] | BEARING | ||
| 095-0670 FM | [6] | BOLT (M12X1.75X45-MM) | ||
| 379-8197 F | [4] | HANDLE AS | ||
| 095-0919 F | [4] | RING-RETAINING | ||
| 098-5231 F | [20] | RIVET | ||
| 379-8195 F | [4] | ROD END AS | ||
| 8T-0390 FM | [2] | NUT-SELF LOCKING (M24X2-THD) | ||
| 419-9120 F | [4] | PLATE-GAUGE | ||
| 5C-7423 FM | [2] | SCREW (M6X1X16-MM) | ||
| 379-8196 F | [4] | SHAFT AS | ||
| 8T-0343 FM | [6] | BOLT-SOCKET HEAD (M12X1.75X55-MM) | ||
| 8T-3957 FM | [8] | BOLT-SOCKET HEAD (M12X1.75X30-MM) | ||
| 8T-4133 FM | [2] | NUT (M10X1.5-THD) | ||
| 8T-4223 F | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-9597 F | [2] | RING-RETAINING | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 399-5595 J | [1] | KIT-SEAL | ||
| (INCLUDES O-RINGS, SEALS & LIP-SEAL) | ||||
| F | NOT SHOWN | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03950227
377-6073: FRAME GP-SCREED
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8U-1586 C | [2] | LOCK PIN | |
| 2. | 379-8177 C | [2] | INDICATOR (SCREED) | |
| 3. | 379-8191 CY | [1] | ADJUSTER GP-MANUAL | |
| 4. | 379-8193 C | [1] | PLATE-GAUGE | |
| 5. | 381-0717 C | [2] | PLATE-GAUGE | |
| 6. | 524-1083 CJ | [2] | CYLINDER AS-HYDRAULIC | |
| 7. | 436-3660 C | [1] | FRAME AS-MAIN (RH) | |
| 436-3644 | [1] | TUBE AS | ||
| 436-3645 | [1] | TUBE AS | ||
| 8T-3612 M | [14] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 436-3670 C | [1] | FRAME AS-MAIN (LH) | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 436-3638 | [1] | PLATE AS | ||
| [1] | PLATE-MAIN | |||
| 8T-3612 M | [19] | NUT-WELD (M8X1.25-THD) | ||
| 436-3641 | [1] | BRACKET AS | ||
| 436-3644 | [1] | TUBE AS | ||
| 436-3645 | [1] | TUBE AS | ||
| 9. | 437-2575 C | [1] | FRAME AS-REAR (LH) | |
| 8T-3636 M | [1] | STUD-WELD (M8X1.25X32-MM) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 10. | 437-4907 C | [1] | FRAME AS-REAR (RH) | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 437-4909 | [1] | PLATE | ||
| 8T-3636 M | [1] | STUD-WELD (M8X1.25X32-MM) | ||
| 11. | 460-5719 C | [1] | SHEET | |
| 12. | 460-5720 C | [1] | SHEET | |
| 13. | 460-5721 C | [1] | COVER | |
| 14. | 460-5722 CY | [2] | ADJUSTER GP-MANUAL | |
| 15. | 461-8790 C | [1] | FRAME AS (LH) | |
| 7T-1099 | [1] | LINK | ||
| 461-8796 | [1] | PLATE AS | ||
| 16. | 461-8799 C | [1] | FRAME AS (RH) | |
| 7T-1099 | [1] | LINK | ||
| 461-8802 | [1] | PLATE AS | ||
| 17. | 461-8806 C | [2] | COVER | |
| 18. | 461-8807 C | [4] | COVER | |
| 19. | 461-8808 C | [1] | PLATE | |
| 20. | 461-8809 C | [1] | PLATE | |
| 21. | 461-8810 C | [1] | SUPPORT AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 22. | 461-8812 C | [2] | SHEET | |
| 23. | 461-8813 C | [4] | WASHER (11X28X3-MM THK) | |
| 24. | 461-8814 C | [2] | COVER | |
| 25. | 461-8815 C | [2] | COVER | |
| 26. | 461-8816 C | [2] | BUSHING | |
| 27. | 461-8817 C | [2] | BUSHING | |
| 28. | 461-8818 C | [2] | COVER | |
| 29. | 461-8819 C | [2] | SUPPORT | |
| 30. | 461-8820 C | [2] | COVER | |
| 31. | 461-8821 C | [2] | ROD | |
| 32. | 461-8822 CY | [2] | GUIDE GP-STEERING | |
| 33. | 098-5231 C | [22] | RIVET | |
| 34. | 127-2909 CM | [12] | SCREW-FLAT HEAD (M10X1.5X20-MM) | |
| 35. | 153-3568 CM | [4] | BOLT-SOCKET HEAD (M5X0.8X10-MM) | |
| 36. | 6V-8454 CM | [28] | SCREW-HEX SOCKET (M8X1.25X16-MM) | |
| 37. | 178-2991 CM | [2] | BOLT-SELF-LOCKING (M20X2.5X70-MM) | |
| 38. | 208-7492 CM | [8] | NUT (M20X2.5-THD) | |
| 39. | 211-9032 C | [8] | WASHER-HARD (8.8X13X2-MM THK) | |
| 40. | 188-9644 CM | [20] | SCREW-FLAT HEAD (M8X1.25X25-MM) | |
| 41. | 419-9120 C | [4] | PLATE-GAUGE | |
| 42. | 5A-3604 CM | [8] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 43. | 5C-7261 CM | [2] | NUT (M8X1.25-THD) | |
| 44. | 5C-9553 CM | [4] | BOLT (M6X1X16-MM) | |
| 45. | 5P-4116 C | [16] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 46. | 6V-7688 CM | [2] | LOCKNUT (M20X2.5-THD) | |
| 47. | 7X-0579 C | [1] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 48. | 8K-1433 C | [2] | GROMMET | |
| 49. | 8T-0328 C | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 50. | 8T-4122 C | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 51. | 8T-4139 CM | [2] | BOLT (M12X1.75X30-MM) | |
| 52. | 8T-4190 CM | [2] | BOLT (M16X2X25-MM) | |
| 53. | 8T-4200 CM | [19] | BOLT (M8X1.25X16-MM) | |
| 54. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 55. | 8T-4224 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 56. | 8T-7547 CM | [1] | BOLT (M8X1.25X30-MM) | |
| 57. | 9X-8256 C | [4] | WASHER (6.6X12X2-MM THK) | |
| 58. | 3E-6600 CE | SEAL (23.8-CM EACH) | ||
| 58A. | 3E-6600 CE | SEAL (24.7-CM EACH) | ||
| 59. | 465-4955 | [4] | FITTING-GREASE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 524-1084 J | [1] | KIT-SEAL | ||
| (INCLUDES O-RINGS, SEALS & SCRAPER) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03950228
460-5680: GATE GP-END
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 310-9822 Y | [1] | ADJUSTER GP-MANUAL | |
| 2. | 310-9823 Y | [1] | ADJUSTER GP-MANUAL | |
| 3. | 460-5681 | [1] | FRAME AS | |
| 4. | 460-5692 | [1] | FRAME AS | |
| 5. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 8. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 9. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 10. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 11. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 14. | 8T-6868 M | [3] | BOLT (M12X1.75X80-MM) | |
| 15. | 256-3561 E | CHAIN (35-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03950229
460-5698: GATE GP-END
For full view, you need register
Parts for your AP-255E ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 310-9822 Y | [1] | ADJUSTER GP-MANUAL | |
| 2. | 310-9823 Y | [1] | ADJUSTER GP-MANUAL | |
| 3. | 460-5699 | [1] | FRAME AS | |
| 4. | 460-5710 | [1] | FRAME AS | |
| 5. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 8. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 9. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 10. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 11. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 14. | 8T-6868 M | [3] | BOLT (M12X1.75X80-MM) | |
| 15. | 256-3561 E | CHAIN (35-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
