AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

374-1336 LINES GP-CONVEYOR MOTOR S/N JFC1-UP PART OF 374-1367 CONVEYOR AR-SECOND STAGE Type 2 AN ATTACHMENT PM622


IMPLEMENTS
LINES GP
MOLDBOARD GP
ACTUATOR GP
MOUNTING GP
CONVEYOR GP
CHAMBER GP

COLD PLANER PM622 COLD PLANER JFC
 PM622 Cold Planer JFC00001-UP (MACHINE) POWERED BY C18 Engine KEBP6225 PM622 JFC   (2015)

IMPLEMENTS

LINES GP
LINES GP-CONVEYOR MOTOR
374-1336 LINES GP-CONVEYOR MOTOR
LINES GP-CONVEYOR MOTOR
374-1336 LINES GP-CONVEYOR MOTOR
LINES GP-MOTOR
374-1375 LINES GP-MOTOR
LINES GP-MOTOR
378-8252 LINES GP-MOTOR
 

#KEBP62250600
 

374-1336: LINES GP-CONVEYOR MOTOR

374-1336 LINES GP-CONVEYOR MOTOR
S/N JFC1-UP
PART OF 374-1367 CONVEYOR AR-SECOND STAGE
Type 2
AN ATTACHMENT
i06830663 KEBP6225
3741336 LINES GP-CONVEYOR MOTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-6869 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  9X-2614 [1] CONNECTOR  
2. 7V-5628 [2] PLATE (TOP)  
3. 101-7638 [1] VALVE GP-CHECK (MIXING CHAMBER TILT)  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
4. 102-8703 [7] PLATE-COVER  
5. 200-6345 [1] SADDLE-MOUNTING (DUAL SWIVEL)  
6. 207-4499 [2] PLATE-COVER  
7. 466-4998 [1] BRACKET AS  
8. 519-7449 CI [2] HOSE AS  
9. 519-7448 CI [1] HOSE AS  
10. 519-7451 CI [2] HOSE AS  
11. 519-7450 CI [1] HOSE AS  
12. 476-2864 I [1] HOSE AS  
13. 476-2866 I [1] HOSE AS  
14. 476-2867 I [1] HOSE AS  
15. 476-2868 I [1] HOSE AS  
16. 148-8455 [2] UNION AS  
    (EACH INCLUDES)
  6V-8997 [1] UNION  
  6V-9746 [2] SEAL-O-RING  
17. 148-8457 [1] UNION AS (STRAIGHT)  
  6V-8398 [2] SEAL-O-RING  
  6V-8995 [1] UNION (STRAIGHT)  
18. 154-4880 [14] CLAMP-HALF  
19. 177-2215 [6] STRAP-DUAL CLAMP  
20. 204-2281 [13] STRAP-CABLE  
21. 154-4884 C [4] CLAMP-HALF  
22. 2P-1293 [2] LOCKNUT (1-3/16-12-THD)  
23. 6V-9169 [1] NUT (13/16-16-THD)  
24. 7R-7908 C [4] CLAMP  
25. 7X-2537 M [7] BOLT (M8X1.25X35-MM)  
26. 8C-8451 M [4] BOLT (M6X1X40-MM)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
29. 8T-6869 M [2] BOLT (M8X1.25X60-MM)  
30. 470-7306 E GUARD (381.1-CM)  
30A. 470-7306 E GUARD (166.5-CM)  
31. 7K-1181 [8] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP62250601
 

374-1375: LINES GP-MOTOR

374-1375 LINES GP-MOTOR
S/N JFC1-UP
PART OF 374-1368 CONVEYOR AR-SECOND STAGE
AN ATTACHMENT
i06222383 KEBP6225
3741375 LINES GP-MOTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-4892 M [1] BOLT-STACKING (M8X1.25X61-MM)  
2. 7V-5628 [3] PLATE (TOP)  
3. 102-8705 [1] PLATE (TOP)  
4. 206-0452 [1] PLATE  
5. 207-4499 [3] PLATE-COVER  
6. 415-3750 [1] BRACKET AS  
  154-4887 [1] PLATE AS  
7. 472-1503 I [1] HOSE AS  
8. 472-1504 I [2] HOSE AS  
9. 148-8407 [2] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
10. 4V-0611 [1] CLAMP  
11. 177-2215 [3] STRAP-DUAL CLAMP  
12. 204-2281 [5] STRAP-CABLE  
13. 206-6413 [8] CLAMP-HALF  
14. 7V-5626 [6] CLAMP  
15. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
16. 8C-8451 M [6] BOLT (M6X1X40-MM)  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [2] NUT (M10X1.5-THD)  
20. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
21. 8T-6869 M [3] BOLT (M8X1.25X60-MM)  
22. 470-7306 E GUARD (249-CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP62250602
 

378-8252: LINES GP-MOTOR

378-8252 LINES GP-MOTOR
S/N JFC1-UP
PART OF 377-2969 VENTILATION GP-COLD PLANER
AN ATTACHMENT
i06273931 KEBP6225
3788252 LINES GP-MOTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [4] STRAP-CABLE  
2. 7V-5628 [1] PLATE (TOP)  
3. 102-8705 [1] PLATE (TOP)  
4. 177-2215 [10] STRAP-DUAL CLAMP  
5. 194-2903 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  8T-0119 [1] ELBOW  
6. 200-6345 [2] SADDLE-MOUNTING (DUAL SWIVEL)  
7. 204-2281 [4] STRAP-CABLE  
8. 345-3920 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  345-3919 [1] CONNECTOR  
9. 351-7063 I [1] HOSE AS  
10. 418-0534 I [1] HOSE AS  
11. 418-0536 I [1] HOSE AS  
12. 454-2147 I [1] HOSE AS  
13. 470-7342 [1] PLATE AS  
  102-8706 [1] PLATE AS  
  178-8505 [1] PLATE-WELD  
14. 471-2044 I [1] HOSE AS  
15. 471-2045 I [1] HOSE AS  
16. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
17. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
18. 148-8457 [2] UNION AS (STRAIGHT)  
    (EACH INCLUDES)
  6V-8398 [2] SEAL-O-RING  
  6V-8995 [1] UNION (STRAIGHT)  
19. 149-5452 [1] UNION AS (STRAIGHT)  
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
20. 4V-0611 [2] CLAMP  
21. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
22. 6V-9168 [1] NUT (11/16-16-THD)  
23. 6V-9169 [2] NUT (13/16-16-THD)  
24. 7R-7907 [2] CLAMP  
25. 7X-0818 M [1] BOLT (M8X1.25X45-MM)  
26. 8C-8451 M [2] BOLT (M6X1X40-MM)  
27. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
28. 160-2251 G SLEEVE-ABRASION (63-IN)  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP62250603
 

374-1403: MOLDBOARD GP

374-1403 MOLDBOARD GP
S/N JFC1-UP
PART OF 374-1405 SPRAY AR-WATER
AN ATTACHMENT
i06275512 KEBP6225
3741403 MOLDBOARD GP Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 276-5627 [2] FITTING-GREASE  
2. 526-5755 [1] MOLDBOARD AS  
3. 382-4623 [1] EDGE-CUTTING  
4. 382-4624 [6] EDGE-CUTTING  
5. 382-4625 [1] EDGE-CUTTING  
6. 386-4495 [2] PLATE  
7. 386-4507 [2] PIN AS  
8. 386-4528 [1] EDGE-CUTTING  
9. 386-4611 [2] EDGE-CUTTING  
10. 517-3847 [1] DOOR AS-REAR  
  7T-1099 [8] LINK  
  102-8704 [3] PLATE  
  361-5420 [2] CLIP  
11. 399-1462 [2] SWITCH AS-SENSOR (MOLDBOARD)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  151-9272 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
12. 515-6603 [1] PLATE  
13. 095-7993 [4] DOWEL  
14. 2D-3611 [8] WASHER-THRUST  
15. 8C-8580 M [4] BOLT-SOCKET HEAD (M5X0.8X16-MM)  
16. 8T-4001 M [2] NUT (M24X3-THD)  
17. 8T-4121 [35] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [31] NUT (M10X1.5-THD)  
19. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
20. 8T-4167 [2] WASHER-HARD (26X44X4-MM THK)  
21. 213-5007 M [10] BOLT (M20X2.5X80-MM)  
22. 8T-5439 [10] WASHER-HARD (21.5X45X6-MM THK)  
23. 101-7398 M [31] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
24. 6V-8200 M [8] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
25. 526-4875 [2] GUIDE  
   
    AVAILABLE REPAIR KIT(S):
  569-5426 Y [1] KIT-CUTTING EDGE  
  569-5427 Y [1] KIT-CUTTING EDGE  
  569-5428 Y [1] KIT-CUTTING EDGE  
  569-0300 Y [1] KIT-CUTTING EDGE  
  569-0301 Y [1] KIT-CUTTING EDGE (MOLDBOARD)  
  569-0302 Y [1] KIT-CUTTING EDGE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250604
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER
S/N JFC1-UP
24-VOLT
PART OF 388-1047 MOTOR GP-ELECTRIC
AN ATTACHMENT
i06272308 KEBP6225
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE (12.8X16X19-MM THK)  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE (9.6X12.8X9.5-MM THK)  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP62250605
 

390-2865: MOUNTING GP-AUX DRIVE MOTOR

390-2865 MOUNTING GP-AUX DRIVE MOTOR
S/N JFC1-201
PART OF 374-1269 POWER TRAIN AR
ALSO AN ATTACHMENT
i06222377 KEBP6225
3902865 MOUNTING GP-AUX DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 382-3747 [1] SHEAVE  
2. 479-2096 Y [1] DRIVE GP-ROTOR  
3. 2R-0098 [1] SEAL-O-RING  
4. 7X-0531 [12] WASHER-HARD (31X52.5X6-MM THK)  
5. 8F-3895 [12] BOLT (1-1/8-12X4-IN)  
6. 8T-4123 [24] WASHER (22X35X3.5-MM THK)  
7. 8T-4141 M [24] BOLT (M20X2.5X70-MM)  
8. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250606
 

390-2865: MOUNTING GP-AUX DRIVE MOTOR

390-2865 MOUNTING GP-AUX DRIVE MOTOR
S/N JFC202-UP
PART OF 374-1269 POWER TRAIN AR
ALSO AN ATTACHMENT
i07582144 KEBP6225
3902865 MOUNTING GP-AUX DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 382-3747 [1] SHEAVE  
2. 565-7843 CY [1] DRIVE GP-ROTOR  
3. 2R-0098 [1] SEAL-O-RING  
4. 7X-0531 [12] WASHER-HARD (31X52.5X6-MM THK)  
5. 8F-3895 [12] BOLT (1-1/8-12X4-IN)  
6. 8T-4123 [24] WASHER (22X35X3.5-MM THK)  
7. 8T-4141 M [24] BOLT (M20X2.5X70-MM)  
8. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250607
 

390-2872: MOUNTING GP-COUPLING

390-2872 MOUNTING GP-COUPLING
S/N JFC1-UP
PART OF 374-1269 POWER TRAIN AR
ALSO AN ATTACHMENT
i06590471 KEBP6225
3902872 MOUNTING GP-COUPLING Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-6565 [8] BOLT (1/2-13X1.125-IN)  
2. 7X-0584 [8] WASHER-HARD (13.5X20.5X2-MM THK)  
 

#KEBP62250608
 

374-1400: PIVOT GP-CONVEYOR

374-1400 PIVOT GP-CONVEYOR
S/N JFC1-UP
PART OF 374-1265 CONVEYOR AR
ALSO AN ATTACHMENT
i06214344 KEBP6225
3741400 PIVOT GP-CONVEYOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 465-3430 [1] PIVOT AS  
  6V-5202 [4] RING  
1A. 386-4205 [2] BEARING  
1B. 415-1171 [2] BEARING  
  470-0145 [1] PIVOT AS  
2. 465-4580 [2] WASHER-THRUST  
3. 465-4581 [2] DISC  
4. 8T-5379 M [2] BOLT (M24X3X50-MM)  
5. 8Y-7119 [2] WASHER (26X144X12-MM THK)  
6. 467-8834 [2] SHIM (2-MM THK)  
7. 8T-4167 B [1] WASHER-HARD (26X44X4-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP62250609
 

378-6625: PLATE GP-ROTOR

378-6625 PLATE GP-ROTOR
S/N JFC1-UP
PART OF 374-1405 SPRAY AR-WATER
AN ATTACHMENT
i06275522 KEBP6225
3786625 PLATE GP-ROTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 382-4612 [4] PLATE AS  
2. 386-4426 [2] PLATE  
3. 520-1034 [1] PLATE AS  
4. 386-4432 [1] PLATE AS  
5. 579-1665 [1] PLATE AS  
6. 386-4500 [2] BELT  
7. 386-9914 [2] BELT  
8. 391-5708 [1] GUARD  
9. 533-4795 [1] PLATE AS-SIDE (LH)  
10. 533-4796 [1] PLATE AS-SIDE (RH)  
11. 7X-2552 M [6] BOLT (M16X2X30-MM)  
12. 7X-7729 [22] WASHER (11X25X3-MM THK)  
13. 8T-4132 M [4] NUT (M16X2-THD)  
14. 8T-4133 M [18] NUT (M10X1.5-THD)  
15. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
16. 8T-4174 M [4] BOLT (M16X2X120-MM)  
17. 8T-4185 M [10] BOLT (M10X1.5X50-MM)  
18. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4226 [18] WASHER-PLATED (10.5X45X3-MM THK)  
21. 8T-4244 M [12] NUT (M12X1.75-THD)  
22. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
23. 8T-7338 M [2] BOLT (M16X2X45-MM)  
24. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
25. 533-4799 [2] BLOCK  
   
    AVAILABLE REPAIR KIT(S):
  569-5429 Y [1] KIT-CHAMBER  
  569-5430 Y [1] KIT-CHAMBER (FLASHING)  
  569-0298 Y [1] KIT-CHAMBER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Lines (Conveyor)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems
Lines (Conveyor) - Motor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems

Caterpillar Parts SIS Catalog PM622 :

LINES GP-CONVEYOR MOTOR
374-1336 LINES GP-CONVEYOR MOTOR
569-5438 KIT-ROTOR
569-5437 KIT-ROTOR
569-5436 KIT-ROTOR
569-0296 KIT-ROTOR
569-0305 KIT-PLATE
569-5424 KIT-FEEDER CONVEYOR
569-0306 KIT-FASTENER
LINES GP-MOTOR
374-1375 LINES GP-MOTOR
LINES GP-MOTOR
378-8252 LINES GP-MOTOR
MOLDBOARD GP
374-1403 MOLDBOARD GP
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
MOUNTING GP-AUX DRIVE MOTOR
390-2865 MOUNTING GP-AUX DRIVE MOTOR
MOUNTING GP-AUX DRIVE MOTOR
390-2865 MOUNTING GP-AUX DRIVE MOTOR
MOUNTING GP-COUPLING
390-2872 MOUNTING GP-COUPLING
PIVOT GP-CONVEYOR
374-1400 PIVOT GP-CONVEYOR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.