KIT-RECEPTACLE 1743091 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-6400 Three Jaw Puller 1 Start By:
Release the system pressure.
Remove the fan.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06052698
Remove nut (1).
Illustration 2 g06052701
Use Tooling (A) and remove adapter (2).
Illustration 3 g06052700
Remove the cable straps and disconnect harness assemblies (5) from gear motor (hydraulic fan) (6).
Disconnect hose assemblies (4) and (7) from gear motor (hydraulic fan) (6).
Remove bolts (3) and gear motor (hydraulic fan) (6).Installation Procedure
Install gear motor (hydraulic fan) (6) in the reverse order of removal.
Tighten hose assemblies (7) to a torque of 70 10 N m (52 7 lb ft).
Tighten nut (1) to a torque of 60 10 N m (44 7 lb ft).