KIT-SHIM 1850305 - Caterpillar

Rotary Position Sensor (Boom)
Illustration 5 g03333537
Rotary Position Sensor (Boom)
Position Sensing Cylinder (PSC)
The Position Sensing Cylinder (PSC) measures the rod extension and retraction of the hydraulic cylinder for the bucket. The PSC uses a sensor that is integrated into the cylinder to make this measurement. Refer to Special Instruction, M0064526, "Troubleshooting Procedure For Bucket Cylinder Position Sensing Unit on Certain Hydraulic Excavators Equipped With Cat® Grade Control".
Illustration 6 g03332886
(5) Position sensing cylinder connector
(6) Position sensing cylinder assembly
Illustration 7 g03332902
Bucket Position Sensing Cylinder Connector
(7) Ground
(8) Supply voltage
(9) Signal
Table 3
Bucket Position Sensing Cylinder Connector
Pin Description Color
1 Supply Voltage +8VDC OR(Orange)
2 Ground BK(Black)
3 Signal WH(White)
4 N/A LC450 Laser Catcher
Illustration 8 g01911557
LC450 Laser Catcher
Illustration 9 g01507398
Laser Catcher Six-Pin Connector
Table 4
Laser Catcher Connector
Pin Function
A Power
B Unused
C CAN HI
D CAN LO
E Unused
F Ground ECM
Illustration 10 g03332911
Machine ECM
(10) ECM
(11) J2 Connector (Brown)
(12) J1 Connector (Black)
Illustration 11 g03332912
Connectors for the Machine ECM
(13) J2 Connector (Brown)
(14) J1 Connector (Black)Table 5 and Table 6 lists the contact description for the ECM.
Table 5
J1 Connector
J1 - 16 "CDL-"
J1 - 25 "CDL+"
J1 - 45 "CAN3+"
J1 - 46 "CAN3-"
J1 - 47 "CAN2+"
J1 - 48 "CAN2-"
J1 - 50 "CAN1+"
J1 - 51 "CAN1-"
Table 6
J2 Connector
J2 - 1 "BAT +"
J2 - 2 "GND"
J2 - 13 "BAT +"
J2 - 14 "GND"
J2 - 23 "Key"
J2 - 27 "8V Power for PSC"
J2 - 44 Bucket PSC
J2 - 47 "Stick potentiometer"
J2 - 50 "Boom potentiometer"