KIT-SEAL 2588412 - Caterpillar

Removal Procedure
Start By:
Remove the hood. Refer to the Engine Supplement for the scraper Disassembly and Assembly, "Hood - Remove and Install".
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and plug all tube assemblies. This helps prevent fluid loss, and this helps keep contaminants from entering the system.
Turn the battery disconnect switch to the OFF position.
Drain the transmission oil into a suitable container for storage or disposal.
Illustration 1 g00822154
Disconnect harness assembly (2).
Disconnect hose assembly (3).
Remove lockup clutch and synchronizing valve (1).