BDJ7000 Lafayette 3616 Engine Caterpillar parts
3616
Rating:
Alternative (cross code) number:
CABDJ7000
BDJ-7000
BDJ7000
CABDJ7000
BDJ-7000
BDJ7000
MARINE ENGINE,
Compatible equipment models: BDJ7000:
For full view, you need register
Information:
an area for loading that is flat and stable.
Select an appropriate pallet in order to carry the work tool. Select an appropriate pallet in order to protect the components of the work tool.Note: Ensure that the stands are installed so that the broom does not rest on the bristles.
Remove the work tool from the host machine. Refer to Operation and Maintenance Manual, "Work Tool Installation and Removal" for additional information on removing the work tool.
Place the work tool on a pallet. Use the appropriate lifting points in order to lift the work tool. Refer to Operation and Maintenance Manual, "Lifting and Tying Down" for additional information on lifting the work tool.
Secure the hydraulic lines to the work tool. If protective caps are available, install the protective caps over the quick connect couplers. If caps are not available, connect the two quick connect couplers together.
Use tie-downs to secure the work tool. Refer to Operation and Maintenance Manual, "Lifting and Tying Down" for additional information on tying down the work tool.
Select an appropriate pallet in order to carry the work tool. Select an appropriate pallet in order to protect the components of the work tool.Note: Ensure that the stands are installed so that the broom does not rest on the bristles.
Remove the work tool from the host machine. Refer to Operation and Maintenance Manual, "Work Tool Installation and Removal" for additional information on removing the work tool.
Place the work tool on a pallet. Use the appropriate lifting points in order to lift the work tool. Refer to Operation and Maintenance Manual, "Lifting and Tying Down" for additional information on lifting the work tool.
Secure the hydraulic lines to the work tool. If protective caps are available, install the protective caps over the quick connect couplers. If caps are not available, connect the two quick connect couplers together.
Use tie-downs to secure the work tool. Refer to Operation and Maintenance Manual, "Lifting and Tying Down" for additional information on tying down the work tool.