BLLCQ00 Lafayette 3606 Engine Caterpillar parts
G3606B
Rating:
Alternative (cross code) number:
CABLLCQ00
BLL-CQ00
BLLCQ00
CABLLCQ00
BLL-CQ00
BLLCQ00
GAS ENGINE,
Compatible equipment models: BLLCQ00:
For full view, you need register
Information:
Introduction
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The operator may be unable to open the cab door from inside the cab.Solution
Use the following procedure to adjust lever position.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Adjustment Procedure
Illustration 1 g06282607
View of the inside cab door with cover removed
(A) Screws
(B) Bracket
Remove the inner cover of the cab door.
Loosen screws (A) on bracket (B).
Rotate bracket (B) as far clockwise as possible. Retighten screws (A).
Reinstall the inner cover.
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The operator may be unable to open the cab door from inside the cab.Solution
Use the following procedure to adjust lever position.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Adjustment Procedure
Illustration 1 g06282607
View of the inside cab door with cover removed
(A) Screws
(B) Bracket
Remove the inner cover of the cab door.
Loosen screws (A) on bracket (B).
Rotate bracket (B) as far clockwise as possible. Retighten screws (A).
Reinstall the inner cover.