BLVPP00 Lafayette 3606 Engine Caterpillar parts
G3606B
Rating:
Alternative (cross code) number:
CABLVPP00
BLV-PP00
BLVPP00
CABLVPP00
BLV-PP00
BLVPP00
GAS ENGINE,
Compatible equipment models: BLVPP00:
For full view, you need register
Information:
Disassembly Procedure
Start By:
Remove the coupler cylinder.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 1 g06284041Note: Valve damage or seal damage may occur if the oil pressure is not fully released.
Slowly loosen purge screw (1) to release oil pressure from the coupler cylinder.
Illustration 2 g06284042
Remove counterbalance valve (2).
Illustration 3 g06284043
Remove plugs (3) and the O-ring seals.
Illustration 4 g06284044
Remove bolts (4). Remove rod assembly (6), head assembly (5), and the piston as a unit from the cylinder assembly.Note: Use two people to remove the rod assembly, the head assembly, and the piston if the combined weight exceeds 23 kg (50 lb). Refer Table 1 for the combined weight of the rod assembly, the head assembly, and the piston.
Table 1
Weight information
Cylinder part number Weight of the cylinder Combined weight of the rod assembly, head assembly, and the piston
303-0703 95 kg (209 lb) 35 kg (77 lb)
354-5355 85 kg (187 lb) 32 kg (71 lb)
366-7440 98 kg (216 lb) 35 kg (77 lb)
366-5452 113 kg (249 lb) 41 kg (90 lb)
Illustration 5 g06284045
Remove set screws (7) and piston (8) from the rod assembly.
Illustration 6 g06284046
Remove piston rings (9) and (10) from piston (8).
Illustration 7 g06284047
Illustration 8 g06284048
Remove head assembly (5) from rod assembly (6).
Remove O-ring seal (12) and back-up ring (11). Remove wiper seal (13), lip seal (14), and wear ring (15).
Illustration 9 g06284049
Remove bushing (17) and fitting (16) from rod assembly (6).
Illustration 10 g06284139
Remove bushings (18) from the cylinder assembly.
Start By:
Remove the coupler cylinder.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 1 g06284041Note: Valve damage or seal damage may occur if the oil pressure is not fully released.
Slowly loosen purge screw (1) to release oil pressure from the coupler cylinder.
Illustration 2 g06284042
Remove counterbalance valve (2).
Illustration 3 g06284043
Remove plugs (3) and the O-ring seals.
Illustration 4 g06284044
Remove bolts (4). Remove rod assembly (6), head assembly (5), and the piston as a unit from the cylinder assembly.Note: Use two people to remove the rod assembly, the head assembly, and the piston if the combined weight exceeds 23 kg (50 lb). Refer Table 1 for the combined weight of the rod assembly, the head assembly, and the piston.
Table 1
Weight information
Cylinder part number Weight of the cylinder Combined weight of the rod assembly, head assembly, and the piston
303-0703 95 kg (209 lb) 35 kg (77 lb)
354-5355 85 kg (187 lb) 32 kg (71 lb)
366-7440 98 kg (216 lb) 35 kg (77 lb)
366-5452 113 kg (249 lb) 41 kg (90 lb)
Illustration 5 g06284045
Remove set screws (7) and piston (8) from the rod assembly.
Illustration 6 g06284046
Remove piston rings (9) and (10) from piston (8).
Illustration 7 g06284047
Illustration 8 g06284048
Remove head assembly (5) from rod assembly (6).
Remove O-ring seal (12) and back-up ring (11). Remove wiper seal (13), lip seal (14), and wear ring (15).
Illustration 9 g06284049
Remove bushing (17) and fitting (16) from rod assembly (6).
Illustration 10 g06284139
Remove bushings (18) from the cylinder assembly.