LOCK-RETAINER 1W2715 - Caterpillar

Table 1
Contact Operation for the VCS    
Contacts     Raise     Off     Lower    
1-2     X            
3-4             X    
5-6         X     X    
7-8     X     X        Schematic Code 330000
Illustration 1 g00922133
Schematic Code 330001
Illustration 2 g00922137
Schematic Code 330010
Illustration 3 g00922146
Schematic Code 330011
Illustration 4 g00922149
Schematic Code 330100
Illustration 5 g00922171
(1) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 330101
Illustration 6 g00922178
(1) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 330110
Illustration 7 g00922192
(1) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 330111
Illustration 8 g00922319
(1) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 331000
Illustration 9 g00922335
(1) Voltage Controlled Switch. For contact information, see table 1.Schematic Code 331001
Illustration 10 g00922352
(1) Voltage Controlled Switch. For contact information, see table 1.Schematic Code 331010
Illustration 11 g00922366
(1) Voltage Controlled Switch. For contact information, see table 1.Schematic Code 331011
Illustration 12 g00922426
(1) Voltage Controlled Switch. For contact information, see table 1.Schematic Code 331100
Illustration 13 g00922524
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 331101
Illustration 14 g00922544
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 331110
Illustration 15 g00922550
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 331111
Illustration 16 g00922558
(1) Voltage Controlled Switch. For contact information, see table 1. (2) At start-up, this contact should be closed at 90% of the rated speed.