450-9444 BRACKET GP-MOUNTING S/N 9M21-UP; 9M31-UP; 9M51-UP; 9M61-UP; 9M91-UP; SSW1-UP PART OF 393-0975, 393-0979, 393-0981, 393-0987, 442-5977, 442-5979, 442-5981, 442-5983, 442-5985, 442-5987, 442-5989, 442-5991, 442-5997, 442-5999, 442-6001, 442-6003, 442-6005, 442-6007, 442-6009, 442-6011, 442-6013, 442-6015, 442-6017, 442-6019, 442-6021, 442-6023, 442-6025, 442-6027, 442-6029, 442-6031, 442-6047, 442-6049, 442-6051, 442-6055, 442-6059, 442-6065, 442-6067, 442-6069, 442-6071, 442-6073 GENERATOR GP ALSO AN ATTACHMENT C18

GENERATORS

MISCELLANEOUS INFORMATION

0. 450-9444 BRACKET GP

GENERATOR GP

1. 430-2731 EXCITER GP
2. 478-9167 EXCITER GP
3. 393-0976 GENERATOR
4. 393-0980 GENERATOR
5. 393-0982 GENERATOR
6. 393-0988 GENERATOR
7. 442-5978 GENERATOR
8. 442-5980 GENERATOR
9. 442-5982 GENERATOR
0. INFORMATION

GENERATOR SET C18 GENERATOR SET SSW
C18 Marine Generator Set SSW00001-UP M0064328 C18 SSW (2015)

GENERATORS

MISCELLANEOUS INFORMATION

430-2713 BRACKET GP-MOUNTING

450-9444 BRACKET GP-MOUNTING

#M00643280330

450-9444: BRACKET GP-MOUNTING

BRACKET GP-MOUNTING

450-9444 BRACKET GP-MOUNTING
S/N 9M21-UP; 9M31-UP; 9M51-UP; 9M61-UP; 9M91-UP; SSW1-UP
PART OF 393-0975, 393-0979, 393-0981, 393-0987, 442-5977, 442-5979, 442-5981, 442-5983, 442-5985, 442-5987, 442-5989, 442-5991, 442-5997, 442-5999, 442-6001, 442-6003, 442-6005, 442-6007, 442-6009, 442-6011, 442-6013, 442-6015, 442-6017, 442-6019, 442-6021, 442-6023, 442-6025, 442-6027, 442-6029, 442-6031, 442-6047, 442-6049, 442-6051, 442-6055, 442-6059, 442-6065, 442-6067, 442-6069, 442-6071, 442-6073 GENERATOR GP
ALSO AN ATTACHMENT

i06304529 M0064328

4509444 BRACKET GP-MOUNTING Parts scheme

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-8268	[2]	RETAINER-BEARING
2.	381-0995	[1]	PIPE
3.	430-2714	[1]	BRACKET AS
4.	430-2716	[1]	BRACKET AS-HOUSING
5.	3B-6487	[1]	COUPLING (PIPE)
6.	5M-6214	[1]	PLUG (1/8-27 PTF)
7.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
9.	8T-4140 M	[8]	BOLT (M16X2X60-MM)
10.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
11.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
12.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	9X-8257	[8]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART

#M00643280331

430-2731: EXCITER GP

EXCITER GP

430-2731 EXCITER GP
S/N 9M21-UP; 9M31-UP; 9M51-UP; 9M61-UP; 9M91-UP; SSW1-UP
PART OF 393-0975, 393-0979, 393-0981, 393-0987, 442-5977, 442-5979, 442-5981, 442-5983, 442-5985, 442-5987, 442-5989, 442-5991, 442-5997, 442-5999, 442-6001, 442-6003, 442-6005, 442-6007, 442-6009, 442-6011, 442-6013, 442-6015, 442-6017, 442-6019, 442-6021, 442-6023, 442-6025, 442-6027, 442-6029, 442-6031, 442-6047, 442-6049, 442-6051, 442-6055, 442-6059, 442-6065, 442-6067, 442-6069, 442-6071, 442-6073 GENERATOR GP
ALSO AN ATTACHMENT

i06304690 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	430-2719	[1]	STATOR-EXCITER
2.	7X-2538 M	[4]	BOLT (M8X1.25X100-MM)
3.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#M00643280332

478-9167: EXCITER GP

EXCITER GP

478-9167 EXCITER GP
S/N 9M21-UP; 9M31-UP; 9M51-UP; 9M61-UP; 9M91-UP; SSW1-UP
PART OF 393-0975, 393-0979, 393-0981, 393-0987, 442-5977, 442-5979, 442-5981, 442-5983, 442-5985, 442-5987, 442-5989, 442-5991, 442-5997, 442-5999, 442-6001, 442-6003, 442-6005, 442-6007, 442-6009, 442-6011, 442-6013, 442-6015, 442-6017, 442-6019, 442-6021, 442-6023, 442-6025, 442-6027, 442-6029, 442-6031, 442-6047, 442-6049, 442-6051, 442-6055, 442-6059, 442-6065, 442-6067, 442-6069, 442-6071, 442-6073 GENERATOR GP
ALSO AN ATTACHMENT

i06304565 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	420-0436	[2]	BRACKET
2.	430-2723	[1]	ROTOR
3.	430-2724	[1]	SPACER
4.	430-2728	[1]	RING
5.	478-9168	[1]	STATOR AS
6.	8C-8451 M	[2]	BOLT (M6X1X40-MM)
7.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-7547 M	[8]	BOLT (M8X1.25X30-MM)
9.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#M00643280333

393-0976: GENERATOR AR

GENERATOR AR

393-0976 GENERATOR AR
S/N 9M61-UP
50-HERTZ. 690-VOLT. 932-FRAME

i06024739 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	393-0975 Y	[1]	GENERATOR GP
	Y		SEPARATE ILLUSTRATION

#M00643280334

393-0980: GENERATOR AR

GENERATOR AR

393-0980 GENERATOR AR
S/N 9M51-UP
50-HERTZ. 60-HERTZ. 400-VOLT. 480-VOLT. 931-FRAME

i06024920 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
393-0979 Y	[1]	GENERATOR GP
139-9026	[1]	FILM-INFORMATION (GENERATOR WIRING DIAGRAM)
Y		SEPARATE ILLUSTRATION

#M00643280335

393-0982: GENERATOR AR

GENERATOR AR

393-0982 GENERATOR AR
S/N 9M21-UP
400-VOLT. 50-HERTZ. 933-FRAME

i06024981 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
393-0981 Y	[1]	GENERATOR GP
139-9026	[1]	FILM-INFORMATION (GENERATOR WIRING DIAGRAM)
Y		SEPARATE ILLUSTRATION

#M00643280336

393-0988: GENERATOR AR

GENERATOR AR

393-0988 GENERATOR AR
S/N 9M31-UP; SSW1-UP
936 FRAME, 50/60 HZ, 400/480 VOLT
ALSO AN ATTACHMENT

i05379969 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
393-0987 Y	[1]	GENERATOR GP

139-9026	[1]	FILM-INFORMATION (GENERATOR WIRING DIAGRAM)
Y		SEPARATE ILLUSTRATION

#M00643280337

442-5978: GENERATOR AR

GENERATOR AR

442-5978 GENERATOR AR
S/N 9M61-UP
50-HERTZ / 380-VOLT / 400-VOLT / 415-VOLT. 60-HERTZ / 440-VOLT / 480-VOLT

i06814193 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
442-5977 Y	[1]	GENERATOR GP

228-4798	[1]	FILM-IDENTIFICATION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
303-3440	[2]	FILM-IDENTIFICATION (CAT)
		INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. *IF THERE IS A CIRCUIT BREAKER*MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER.
7W-5893	[4]	FILM-INFORMATION (GENERATOR LIFTING)
		INSTALL ONE FILM TO THE INSIDE OF EACH GENERATOR LIFTING EYE.
118-8452	[1]	FILM-INFORMATION (GENERATOR)
		INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. ** (INSTALL FILM ON THE BARREL ** COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM.
225-3224	[3]	FILM-WARNING (AUTOMATIC ENGINE START)
		INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM, AND ONE FILM ON THE RH AND LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM.
225-3227	[2]	FILM-WARNING (HOT SURFACE)
		INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILM'S ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM.
Y		SEPARATE ILLUSTRATION

#M00643280338

442-5980: GENERATOR AR

GENERATOR AR

442-5980 GENERATOR AR
S/N 9M61-UP
50-HERTZ / 380-VOLT / 400-VOLT / 415-VOLT. 60-HERTZ / 440-VOLT / 480-VOLT

i06814195 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
442-5979 Y	[1]	GENERATOR GP

228-4798	[1]	FILM-IDENTIFICATION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
303-3440	[2]	FILM-IDENTIFICATION (CAT)
		INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. *IF THERE IS A CIRCUIT BREAKER*MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER.
7W-5893	[4]	FILM-INFORMATION (GENERATOR LIFTING)
		INSTALL ONE FILM TO THE INSIDE OF EACH GENERATOR LIFTING EYE.
118-8452	[1]	FILM-INFORMATION (GENERATOR)
		INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. ** (INSTALL FILM ON THE BARREL ** COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM.
225-3224	[3]	FILM-WARNING (AUTOMATIC ENGINE START)
		INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM, AND ONE FILM ON THE RH AND LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM.
225-3227	[2]	FILM-WARNING (HOT SURFACE)
		INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILM'S ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM.
Y		SEPARATE ILLUSTRATION

#M00643280339

442-5982: GENERATOR AR

GENERATOR AR

442-5982 GENERATOR AR
S/N 9M21-UP
50-HERTZ. 690-VOLT

i06814197 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
442-5981 Y	[1]	GENERATOR GP

228-4798	[1]	FILM-IDENTIFICATION (GROUND)
		INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT.
303-3440	[2]	FILM-IDENTIFICATION (CAT)
		INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. *IF THERE IS A CIRCUIT BREAKER*MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER.
7W-5893	[4]	FILM-INFORMATION (GENERATOR LIFTING)
		INSTALL ONE FILM TO THE INSIDE OF EACH GENERATOR LIFTING EYE.
118-8452	[1]	FILM-INFORMATION (GENERATOR)
		INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. ** (INSTALL FILM ON THE BARREL ** COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM.
225-3224	[3]	FILM-WARNING (AUTOMATIC ENGINE START)
		INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM, AND ONE FILM ON THE RH AND LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM.
225-3227	[2]	FILM-WARNING (HOT SURFACE)
		INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILM'S ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM.
Y		SEPARATE ILLUSTRATION